Trainee CNC Machine Operator Apprentice
PACKLINE LTD
Dorset (BH12 4NU)
Closes on Monday 31 May 2027
Posted on 17 November 2026
Contents
Summary
Start your engineering career with a CNC Machinist Level 3 Apprenticeship at Packline. Gain hands-on experience operating CNC milling and turning machines, with full on-the-job training and support from our experienced engineering team. Develop valuable technical skills with opportunities to progress into CNC setting and programming.
- Wage
-
£16,640 for your first year, then could increase depending on your age
National Minimum Wage rate for apprentices
Minimum wage rates (opens in new tab)
Starting salary reviewed after 6 months and then yearly, wiht time and a half overtime
- Training course
- Machining technician (level 3)
- Hours
-
Monday to Thursday 7:30-4:30, Friday 7:30-1:30 with the opportunity for flexible overtime.
40 hours a week
- Start date
-
Wednesday 1 September 2027
- Duration
-
3 years 6 months
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
As a CNC Machinist Level 3 Apprentice at Packline, you will work alongside our experienced engineering team, gaining practical skills in CNC machining and manufacturing.
Your day-to-day tasks will include:
- Learning to safely operate CNC milling machines and lathes.
- Assisting with setting up machines and preparing materials for production.
- Manufacturing precision components for Packline's lifting and handling equipment.
- Reading and following engineering drawings and production instructions.
- Checking finished components for accuracy, quality and correct tolerances.
- Learning about cutting tools, machining techniques and different materials.
- Assisting with routine machine maintenance, including checking oil and coolant levels.
- Maintaining a clean, organised and safe workshop environment.
Working with the Machine Shop Lead to meet production schedules and quality standards. As your skills develop, you will progress towards independently setting up CNC machines, adjusting machining parameters and learning CNC programming, with opportunities to take on greater responsibility.
What interests you about engineering and CNC machining, and why would you like to undertake an apprenticeship with Packline?
Do you have any previous practical experience or knowledge of engineering, manufacturing, machinery or working with tools? If so, please provide brief details. (Previous experience is not essential.)
Where you'll work
Unit D12, The Fulcrum Centre
Vantage Way
Poole
Dorset
BH12 4NU
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
THE BOURNEMOUTH AND POOLE COLLEGE
Training course
Machining technician (level 3)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Comply with statutory health and safety regulations and procedures.
- Comply with environmental, ethical and sustainability regulations and procedures: safe disposal of waste, re-cycling or re-use of materials and efficient use of resources.
- Prepare and set up conventional or CNC machines.
- Operate and adjust conventional or CNC machines.
- Apply risk assessment and hazard identification processes and procedures in the work area.
- Monitor, obtain and check stock and supplies, and complete stock returns.
- Record information - paper based or electronic. For example, energy usage, job sheets, risk assessments, equipment service records, test results, handover documents and manufacturers' documentation, asset management records, work sheets, checklists, waste environmental records and any legal reporting requirements.
- Read and interpret information. For example, data and documentation used to produce machined components.
- Apply engineering, mathematical and scientific principles.
- Plan and organise own work and resources.
- Follow and apply inspection, quality assurance procedures and processes.
- Select machining process.
- Select and setup tooling and work holding devices.
- Set and adjust machine operating parameters. For example, setting feeds and speeds for roughing and finishing operations, loading, proving and validating programs when using a CNC machine tool.
- Apply machining operations and techniques to produce complex components with features. For example, parallel; stepped; angular diameters and faces; grooves; slots; recesses and undercuts; radii and chamfers; internal and external forms and profiles; reamed; bored; drilled and electro eroded holes; internal and external screw threads.
- Measure and check components.
- Select and check condition of tools and equipment. Identify issues, resolve and take action as needed.
- Identify and action issues in the manufacturing process.
- Apply fault-finding and diagnostic testing procedures to identify faults. Diagnose and resolve issues. Escalate issues.
- Maintain the work area and return any resources and consumables.
- Communicate with others verbally. For example, colleagues and stakeholders.
- Follow machine shut down, safe isolation, handover, start up or warm up procedures. Escalate issues.
- Apply continuous improvement techniques. Devise suggestions for improvement.
- Apply ethical principles.
- Apply team working principles.
- Comply with statutory health and safety regulations and procedures.
- Comply with environmental, ethical and sustainability regulations and procedures: safe disposal of waste, re-cycling or re-use of materials and efficient use of resources.
- Prepare and set up conventional or CNC machines.
- Operate and adjust conventional or CNC machines.
- Apply risk assessment and hazard identification processes and procedures in the work area.
- Monitor, obtain and check stock and supplies, and complete stock returns.
- Record information - paper based or electronic. For example, energy usage, job sheets, risk assessments, equipment service records, test results, handover documents and manufacturers' documentation, asset management records, work sheets, checklists, waste environmental records and any legal reporting requirements.
- Read and interpret information. For example, data and documentation used to produce machined components.
- Apply engineering, mathematical and scientific principles.
- Plan and organise own work and resources.
- Follow and apply inspection, quality assurance procedures and processes.
- Select machining process.
- Select and setup tooling and work holding devices.
- Set and adjust machine operating parameters. For example, setting feeds and speeds for roughing and finishing operations, loading, proving and validating programs when using a CNC machine tool.
- Apply machining operations and techniques to produce complex components with features. For example, parallel; stepped; angular diameters and faces; grooves; slots; recesses and undercuts; radii and chamfers; internal and external forms and profiles; reamed; bored; drilled and electro eroded holes; internal and external screw threads.
- Measure and check components.
- Select and check condition of tools and equipment. Identify issues, resolve and take action as needed.
- Identify and action issues in the manufacturing process.
- Apply fault-finding and diagnostic testing procedures to identify faults. Diagnose and resolve issues. Escalate issues.
- Maintain the work area and return any resources and consumables.
- Communicate with others verbally. For example, colleagues and stakeholders.
- Follow machine shut down, safe isolation, handover, start up or warm up procedures. Escalate issues.
- Apply continuous improvement techniques. Devise suggestions for improvement.
- Apply ethical principles.
- Apply team working principles.
Training schedule
Level 3 Machining Technician Apprenticeship Standard https://www.instituteforapprenticeships.org/apprenticeship-standards/st1305-v1-5 FSkills Level 2 in English and maths as required BPC Grow for Apprentices programme
Requirements
Essential qualifications
GCSE in:
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Analytical skills
- Attention to detail
- Initiative
- Logical
- Number skills
- Organisation skills
- Patience
- Physical fitness
- Problem solving skills
- Team working
Other requirements
The application will also need to apply to the Bournemouth and Poole College and attend an academic interview. https://www.thecollege.co.uk/courses/apprenticeship-machining-technician-level-3 On-site workshop attendance
About this employer
Packline Materials Handling Ltd is a UK manufacturer specialising in the design, development and manufacture of innovative lifting and handling equipment. Based in Poole, Dorset, we provide high-quality, standard and bespoke engineering solutions to customers across the UK and internationally. Our products include stainless steel roll, reel and drum handling equipment, vacuum lifting systems, overhead cranes and specialist lifting machinery, serving industries including food and drink, pharmaceutical, manufacturing, packaging and logistics. With our own in-house design, machining and assembly facilities, we offer an excellent environment for apprentices to develop practical engineering skills and gain valuable manufacturing experience. We are committed to investing in our people, encouraging teamwork, innovation and continuous improvement, while providing opportunities for training, career development and progression within the company.
After this apprenticeship
Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).
Progression to Full Time employment.
Ask a question
The contact for this apprenticeship is:
THE BOURNEMOUTH AND POOLE COLLEGE
Teresa Winter
teresa@packline.co.uk
01202 307700
The reference code for this apprenticeship is VAC2000064517.
Apply now
Closes on Monday 31 May 2027