Apprentice Maintenance Technician

HUGH STEEPER LIMITED

Leeds (LS10 1DF)

Closes in 24 days (Friday 27 November 2026 at 11:59pm)

Posted on 3 November 2026

Print

Contents

Summary

Working closely with the Maintenance Technician, you will gain hands on experience maintaining production equipment, plant, facilities and other company assets safely and effectively. Alongside gaining valuable hands on experience, you will undertake an apprenticeship, combining structured training with practical workplace learning.

Wage

£15,600 to £24,784.50, depending on your age

National Minimum Wage

Minimum wage rates (opens in new tab)

Training course
Engineering maintenance technician - dual discipline (level 3)
Hours
Monday - Friday, with hours to be confirmed - no weekends.

37 hours 30 minutes a week

Start date

Monday 30 November 2026

Duration

4 years

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

  • Work closely with the Maintenance Technician to develop a detailed working knowledge of the site's machinery, production equipment, plant, facilities and associated systems
  • Actively learn and retain site-specific maintenance knowledge, including equipment history, recurring faults, repair techniques, servicing requirements and preventative maintenance activities
  • Work closely with Production and other departments to understand operational requirements and provide effective maintenance support
  • Ensure all work is undertaken in accordance with relevant Health & Safety requirements, company procedures, risk assessments and safe systems of work
  • Report defects, hazards, unsafe conditions or emerging maintenance issues promptly
  • Participate in relevant departmental, maintenance, KPI and safety meetings where required
  • Actively participate in internal and external training and development activities
  • Take responsibility for developing technical competence and progressively undertaking maintenance activities with greater independence as experience and capability increase
  • Actively participate in and work towards successful completion of the Level 3 Engineering Maintenance Technician - Dual Discipline apprenticeship, including attending scheduled training sessions, completing coursework and assessments, and meeting required apprenticeship milestones
  • Apply knowledge and skills gained through formal apprenticeship training to practical maintenance activities, demonstrating continuous improvement in technical competence and working towards greater independence

Where you'll work

Unit 3
Stourton Link
Intermezzo Drive
Leeds
LS10 1DF

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

LUMINATE EDUCATION GROUP

Training course

Engineering maintenance technician - dual discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.
  • Electrical and control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and control and instrumentation. Select, check, and use electrical maintenance tools, measurement, and test equipment. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
  • Electrical and control and instrumentation. Use electrical diagnostic equipment and apply fault finding and rectification techniques. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and control and instrumentation. Apply problem solving and critical reasoning techniques.
  • Electrical and control and instrumentation. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and control and instrumentation. Remove and replace electrical parts.
  • Electrical and control and instrumentation. Prepare and terminate electrical cables.
  • Electrical and control and instrumentation. Set up and adjust electrical aspects of plant.
  • Electrical and control and instrumentation. Clean parts. For example, removal of dust and debris.
  • Electrical and control and instrumentation. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and control and instrumentation. Conduct functional testing.
  • Electrical and control and instrumentation. Inspect and test control and instrumentation systems.
  • Electrical and control and instrumentation. Check calibration and make adjustments.
  • Electrical and control and instrumentation. Check loop function.
  • Electrical and control and instrumentation. Set up and adjust control and instrumentation systems.
  • Electrical and control and instrumentation. Remove and replace instruments and sensors.
  • Electrical and control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
  • Electrical and mechanical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and mechanical. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and mechanical. Select, check, and use electrical and mechanical maintenance tools, measurement, and test equipment.
  • Electrical and mechanical. Use electrical and mechanical diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and mechanical. Apply problem solving and critical reasoning techniques.
  • Electrical and mechanical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and mechanical. Remove and replace electrical parts.
  • Electrical and mechanical. Prepare and terminate electrical cables.
  • Electrical and mechanical. Set up, align, and adjust electrical aspects of plant.
  • Electrical and mechanical. Clean parts. For example, removal of dust and debris.
  • Electrical and mechanical. Conduct functional testing.
  • Electrical and mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
  • Electrical and mechanical. Remove and replace mechanical parts.
  • Electrical and mechanical. Examine mechanical parts for defects. For example, pump seals.
  • Electrical and mechanical. Set up, align, and adjust mechanical aspects of plant.
  • Electrical and mechanical. Lubricate mechanical assemblies.
  • Electrical and mechanical. Apply bench fitting techniques.
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.

Training schedule

This training schedule has not been finalised. Check with this employer if you’ll need to travel to a college or training location for this apprenticeship.

Requirements

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • IT skills
  • Attention to detail
  • Organisation skills
  • Administrative skills
  • Team working
  • Initiative
  • Physical fitness

Other requirements

Right to work in UK.

About this employer

Steeper Group is a true leader in the Orthotic, Prosthetic and Assistive Technology products. In the past 100 years we have grown to become one of the UK’s largest suppliers. Steeper’s vision is to create life’s turning points, together. We aim to do this by delivering innovative prosthetic, orthotic and assistive technology products and responsive clinical services.

https://www.steepergroup.com/ (opens in new tab)

Company benefits

  • Holiday allowance (rising with service)
  • Free parking
  • Canteen onsite
  • Employee discount platform
  • Employee Assistance Programmes
  • Refer a friend incentive
  • Cycle2work scheme

Disability Confident

Disability Confident

A fair proportion of interviews for this apprenticeship will be offered to applicants with a disability or long-term health condition. This includes non-visible disabilities and conditions.

You can choose to be considered for an interview under the Disability Confident scheme. You’ll need to meet the essential requirements to be considered for an interview.

After this apprenticeship

Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).

  • Fully supported Level 3 Engineering Maintenance Technician - Dual Discipline apprenticeship
  • Opportunity to gain a nationally recognised Level 3 apprenticeship qualification
  • Structured practical training alongside an experienced Maintenance Technician
  • Development of both mechanical and electrical engineering skills
  • Career progression towards becoming a fully competent Maintenance Technician

Ask a question

The contact for this apprenticeship is:

HUGH STEEPER LIMITED

HR

HR@steepergroup.com

01132704841

The reference code for this apprenticeship is VAC2000061994.

Apply now

Closes in 24 days (Friday 27 November 2026 at 11:59pm)