Drylining Apprenticeship

DENBRE LTD.

Haringey (N22 5JY)

Closes in 25 days (Monday 5 October 2026)

Posted on 9 September 2026

Print

Contents

Summary

Job ID: 3013

JBT run Apprentice Training Programmes for the construction Industry that get people qualified and into work. As a government approved registered FJAA (Flexi-Job Apprenticeship Agency) we partner with our clients (Host Employers) to manage their tailored Apprentice Training Programme.

Wage

£26,520 a year

Minimum wage rates (opens in new tab)

Training course
Interior systems installer (level 2)
Hours
Monday to Friday, 8.00am - 5.00pm (with one hour lunch break).

40 hours a week

Start date

Monday 19 October 2026

Duration

1 year

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

As an apprentice, you will:

Work alongside an experienced site team

Involved in all available interior system related tasks that could involve:-

  • Understanding and working in compliance with health, safety, and environmental regulations
  • Preparing and setting our work area ready for task/s
  • Understanding tools and material use.
  • Communicating effectively and following instructions as given
  • Boarding
  • Fixing
  • Jointing
  • Carrying out repairs/modifications

Where you'll work

Lordship Lane
Haringey
N22 5JY

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

THE SKILLS CENTRE LONDON LIMITED

Training course

Interior systems installer (level 2)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Measure and set out from drawings provided and check vertical and horizontal datum
  • Select the appropriate materials, tools and equipment in accordance with the specification requirements and or manufacturer specific instructions
  • Safely and correctly operate tools and equipment, plant and machinery appropriate for use. (e.g. scaffold, MEWPS, nail gun, circular saw, lasers
  • Apply fire and acoustic mastic seals in accordance with specification, designs details and manufacturers recommendations
  • Accurately measure and cut components (e.g. metal sections, plasterboard, insulation, timber and plywood)
  • Appropriately fix all components according to specifications and/or drawings
  • Effectively protect surround surfaces and segregate work areas and cutting areas
  • Install dry lining systems to metal and stud partitions framed wall linings, framed and frameless beam and column encasements
  • Clearly communicate with management, customers and colleagues including other trades onsite
  • Maintain a clean and tidy environment, appropriately disposing of waste according to site procedures
  • Identify and select appropriate PPE for the task
  • Install pattresses
  • Install insulation
  • Form service penetrations through partitions
  • Install primary channels or main runners to line and level. Cut to length
  • Frame and fit access panels
  • install drylining and plasterboard linings eg panels, plasterboards, metal sections, timber battens, wallboards, thermal boards, glass reinforced gypsum board, fixings and fittings
  • Select the appropriate materials, tools and equipment for installing drylining and plasterboard linings
  • Install and remove drylining systems according to manufacturers guidelines eg British Gypsum, Knauf, Siniat
  • Form openings and junctions in accordance with drawing specifications
  • Carry out repairs to dry lining and plasterboard walls and ceilings in accordance with design details, specification and manufacturers recommendations
  • Form and Fix standard deflection heads in accordance with manufactures standard details
  • Accurately measure and cut components
  • Appropriately fix all components according to specification/drawings.
  • Install different types of drylining systems eg Twin walls, Staggered studs, Service shaft partitions, Curved walls, Walls over 3 metres high
  • Cut and fix tracks at appropriate centres according to Specification & manufactures instructions
  • Apply wall coverings according to Specification & manufactures instructions
  • Install door and window frames in accordance with drawings.
  • Fit cover trims and skirtings in accordance with Specification & manufactures instructions
  • Install glazing, blinds and manifestations to meet customer requirements
  • Hang door leaf complete with ironmongery including cutting and fitting of door furniture (eg hinges, levers, locks, closers and signage).
  • Cut and fix hangers in accordance with specification, manufacturers recommendations and FIS best practice guidlines
  • Install ceiling perimeter trim to level. Ensure trims are cut to length and form internal and external corner mitres.
  • Install subgrid eg hangers and heavy gauge channel to bridge services, heavy gauge channel between roof purlins
  • Fix secondary grid / cross tees ensuring grid is square and following manufacturers recommended installation. Form upstand using cross tee and appropriate trims or channels
  • Cut and install service tiles and pattresses e.g. form square and circular service cut outs through mineral tiles with plywood pattress or metal tiles and insulation pad
  • Complete tiling including: Perimeter tile cuts to mineral and metal tile; tegular tile edges to mineral tile; perimeter wedges for cut metal tiles; tile clips to back of mineral ceiling tiles; insulation pads to back of metal ceiling
  • Remove sections of ceiling and replace damaged grid & tile
  • Measure and set out from drawings provided and check vertical and horizontal datum
  • Select the appropriate materials, tools and equipment in accordance with the specification requirements and or manufacturer specific instructions
  • Safely and correctly operate tools and equipment, plant and machinery appropriate for use. (e.g. scaffold, MEWPS, nail gun, circular saw, lasers
  • Apply fire and acoustic mastic seals in accordance with specification, designs details and manufacturers recommendations
  • Accurately measure and cut components (e.g. metal sections, plasterboard, insulation, timber and plywood)
  • Appropriately fix all components according to specifications and/or drawings
  • Effectively protect surround surfaces and segregate work areas and cutting areas
  • Install dry lining systems to metal and stud partitions framed wall linings, framed and frameless beam and column encasements
  • Clearly communicate with management, customers and colleagues including other trades onsite
  • Maintain a clean and tidy environment, appropriately disposing of waste according to site procedures
  • Identify and select appropriate PPE for the task
  • Install pattresses
  • Install insulation
  • Form service penetrations through partitions
  • Install primary channels or main runners to line and level. Cut to length
  • Frame and fit access panels

Training schedule

This training schedule has not been finalised. Check with this employer if you’ll need to travel to a college or training location for this apprenticeship.

Requirements

Desirable qualifications

GCSE in:

  • English (grade 4)
  • Maths (grade 4)

Level 2 in:

Drylining (grade Pass)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • Organisation skills
  • Logical
  • Team working
  • Initiative
  • Physical fitness

Other requirements

  • CSCS
  • 18+ (for insurance purposes)
  • Comfortable working on a construction site
  • Comfortable with heights

About this employer

Denbre Ltd trades under the name "Joe Brennan Training" and "JBT". JBT run Apprentice Training Programmes for the construction Industry, We partner with our clients (Host Employers) to manage their tailored Apprentice Training Programme.

Company benefits

Subsidise travel costing more than £2.

After this apprenticeship

Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).

Once qualified, the candidate could progress to employment within the construction industry.

Ask a question

The contact for this apprenticeship is:

THE SKILLS CENTRE LONDON LIMITED

The reference code for this apprenticeship is VAC2000052583.

Apply now

Closes in 25 days (Monday 5 October 2026)

After signing in, you’ll apply for this apprenticeship on the company's website.