Apprentice Vehicle Damage MET Technician
FMG REPAIR SERVICES LIMITED
Berkshire (SL1 6FE)
Closes on Wednesday 30 September 2026
Posted on 7 August 2026
Contents
Summary
Are you curious about cars, enjoy hands-on work, and want to get paid while learning?
You’ll gain hands-on experience and a nationally recognised Level 3 qualification. No prior experience is needed, just curiosity, enthusiasm, and a willingness to learn!
- Wage
-
£17,728.62 a year
Minimum wage rates (opens in new tab)
The pay may be negotiated and may rise after a probation period has been successfully completed.
- Training course
- Vehicle damage mechanical, electrical and trim (MET) technician (level 3)
- Hours
-
Monday to Friday (Varied between 08:00 and 17:00).
40 hours a week
- Start date
-
Thursday 1 October 2026
- Duration
-
2 years 6 months
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
As an Apprentice MET Technician, you’ll assist and learn across a variety of tasks in the bodyshop, including:
- Removing and refitting mechanical, electrical, trim and non-structural body components
- Learning to diagnose vehicle faults, including basic electrical systems
- Carrying out panel alignment and supporting repairs to manufacturer standards
- Following approved repair methods to ensure vehicles are safe, roadworthy and meet BS10125 quality standards
- Learning to use specialist tools and equipment safely, including welding and soldering under supervision
- Maintaining tools, equipment and a clean, safe working environment
- Working alongside experienced technicians while developing your practical skills
- Communicating effectively with your team and contributing to high-quality repairs
Where you'll work
Whittle Parkway
Slough
Berkshire
SL1 6FE
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
THATCHAM RESEARCH
Training course
Vehicle damage mechanical, electrical and trim (MET) technician (level 3)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Ability to undertake appropriate job preparation prior to commencing repair, e.g. disarming airbags, undertaking electrical safety precautions and conducting pre-repair diagnostics sweeps.
- Ability to interpret relevant technical data, specification and methods will enable appropriate pre-preparation prior to work being carried out.
- Ability to remove, repair and replace Engine, gearbox, suspension, mechanical and electrical systems, related autonomous items from the vehicle safely, e.g. Anti-lock Braking System units, safety restraint systems, Radio Detection and Ranging (RADAR) & Light Detection And Ranging (LIDAR) semi-autonomous components.
- Ability to diagnose and fix faults within a vehicle management system (on board computer) & associated electrical system.
- Ability to identify and communicate supplementary parts where required.
- Ability to identify and operate the correct repair tools, equipment and devices used in the process such as Geometry Wheel Aligners for alignment of the wheels, diagnostic hardware to establish any faults with the vehicle and establish if parts are replaced or re calibrated, utilising torque wrenches to tighten nuts/bolts to the manufacturer recommendations
- Ability to rebuild vehicles post repair and reinstate safety critical systems including Safety Restraint Systems, airbags, seat belts and pretensions, Advanced Driver Assistance Systems, cameras, Radio Detection and Ranging (RADAR) systems and Light Detection And Ranging (LIDAR) systems including collision avoidance technology.
- Qualified in refrigerant handling to EC842 2006 or the most up to date revision of this legislative requirement to enable the repair or replacement of air condition/climate control parts such as condensers, evaporator compressor pump
Training schedule
- Your training will take place both at your workplace and Thatcham Research Automotive Academy, Daytona Drive, Thatcham, RG19 4NR
- Block-release training with an apprenticeship provider every six weeks
More training information
- Block-release training with an apprenticeship provider every six weeks
- On-the-job guidance from an experienced team and allocated workplace mentor
- Visits from a training provider coach every 6-8 weeks
- Additional support from Apprenticeship Central
Requirements
Desirable qualifications
GCSE in:
- English (grade 4/C or above)
- Maths (grade 4/C or above)
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Communication skills
- Attention to detail
- Team working
About this employer
FMG Repair Services are the UK’s leading accident repair services group, with opportunities in our repair centres, Mobile Repair and Motorglass teams throughout England, Scotland and Wales.
We recognise our people are our greatest asset - central to our success - with our team working in a diverse range of roles and locations nationwide.
https://www.fmgrepairservices.co.uk/ (opens in new tab)
Company benefits
- 23 days annual leave, public holidays too and an extra day off to celebrate your birthday
- Free life assurance (x2 your basic salary)
- Pension & save-as-you-earn share scheme
- Well-being services (incl. 24/7 GP service, mental health support and physiotherapy + Health Cash Plan, Dental Plan & Travel Insurance)
- Stream App for all our colleagues – a Financial Well-being app that gives you more control over your pay.
After this apprenticeship
Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).
You’ll learn a range of technical skills, gain hands-on experience across multiple disciplines, and receive ongoing support to help you succeed.
After completing the apprenticeship, you may have the opportunity to continue with the company in a permanent role.
Ask a question
The contact for this apprenticeship is:
THATCHAM RESEARCH
The reference code for this apprenticeship is VAC2000046987.
Apply now
Closes on Wednesday 30 September 2026
After signing in, you’ll apply for this apprenticeship on the company's website.