Maintenance Engineer Apprentice

Froneri

North Yorkshire (DL7 9UL)

Closes in 12 days (Wednesday 19 August 2026 at 11:59pm)

Posted on 4 August 2026

Print

Contents

Summary

An Electrical and Mechanical Maintenance apprentice with Froneri will be involved in planned and unplanned maintenance activities across the entire manufacturing site. This will involve learning all elements of maintenance within a very busy ice cream production plant. 

Wage

£21,450 a year

Minimum wage rates (opens in new tab)

Salary may be increased slightly for the right candidate

Training course
Engineering maintenance technician - dual discipline (level 3)
Hours
Monday to Friday, 8am - 4pm.

37 hours 30 minutes a week

Start date

Monday 7 September 2026

Duration

4 years

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

To complete a programme of training to be conducted within the factory’s Engineering team

  • To become proficient in the application and use of a wide range of engineering tasks both mechanical and electrical.
  • Carrying out such tasks and duties as directed by the engineering team that require the levels of performance and competence of an engineer
  • Attend a weekly progress meeting to summarise skills developed and attained through the course of the week.
  • Clean as you go policy. Maintain your tools in a clean & tidy state.
  • Develop sound fault finding skills both mechanical & electrical.
  • Follow site H&S policy and regulations, if in doubt ask!
  • Gaining familiarity with machines, lines, services etc.
  • Contribute practically on the reactive and proactive maintenance.
  • Contribute practically on the ongoing projects if required.

Where you'll work

Richmond House
Leeming Bar
Northallerton
North Yorkshire
DL7 9UL

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

BISHOP AUCKLAND COLLEGE

Training course

Engineering maintenance technician - dual discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.
  • Electrical and control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and control and instrumentation. Select, check, and use electrical maintenance tools, measurement, and test equipment. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
  • Electrical and control and instrumentation. Use electrical diagnostic equipment and apply fault finding and rectification techniques. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and control and instrumentation. Apply problem solving and critical reasoning techniques.
  • Electrical and control and instrumentation. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and control and instrumentation. Remove and replace electrical parts.
  • Electrical and control and instrumentation. Prepare and terminate electrical cables.
  • Electrical and control and instrumentation. Set up and adjust electrical aspects of plant.
  • Electrical and control and instrumentation. Clean parts. For example, removal of dust and debris.
  • Electrical and control and instrumentation. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and control and instrumentation. Conduct functional testing.
  • Electrical and control and instrumentation. Inspect and test control and instrumentation systems.
  • Electrical and control and instrumentation. Check calibration and make adjustments.
  • Electrical and control and instrumentation. Check loop function.
  • Electrical and control and instrumentation. Set up and adjust control and instrumentation systems.
  • Electrical and control and instrumentation. Remove and replace instruments and sensors.
  • Electrical and control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
  • Electrical and mechanical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and mechanical. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and mechanical. Select, check, and use electrical and mechanical maintenance tools, measurement, and test equipment.
  • Electrical and mechanical. Use electrical and mechanical diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and mechanical. Apply problem solving and critical reasoning techniques.
  • Electrical and mechanical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and mechanical. Remove and replace electrical parts.
  • Electrical and mechanical. Prepare and terminate electrical cables.
  • Electrical and mechanical. Set up, align, and adjust electrical aspects of plant.
  • Electrical and mechanical. Clean parts. For example, removal of dust and debris.
  • Electrical and mechanical. Conduct functional testing.
  • Electrical and mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
  • Electrical and mechanical. Remove and replace mechanical parts.
  • Electrical and mechanical. Examine mechanical parts for defects. For example, pump seals.
  • Electrical and mechanical. Set up, align, and adjust mechanical aspects of plant.
  • Electrical and mechanical. Lubricate mechanical assemblies.
  • Electrical and mechanical. Apply bench fitting techniques.
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.

Training schedule

Attend day release at South West Durham Training, Newton Aycliffe.

Day(s) and times to be determined and is dependent on the successful applicants previous engineering experience or qualifications.

Requirements

Essential qualifications

GCSE in:

  • English (grade 9-4 / A*-C / Level 2)
  • Maths (grade 9-4 / A*-C / Level 2)

Desirable qualifications

GCSE in:

  • Engineering (grade 4)
  • Science (grade 4)

BTEC in:

Engineering (grade Pass)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • Attention to detail
  • Organisation skills
  • Problem solving skills
  • Analytical skills
  • Logical
  • Team working
  • Initiative

About this employer

Froneri is a global ice cream company and joint venture owned equally by Nestlé and PAI Partners. Headquartered in Leeming Bar, United Kingdom, it operates across six continents as the second-largest ice cream producer in the world. Our brands include:

  • Häagen-Dazs
  • Nuii
  • Oreo
  • Cadbury
  • Rowntree's

We employ 15,000 staff worldwide operating out of over 20 countries.

https://www.froneri.com/ (opens in new tab)

After this apprenticeship

Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).

Full time Maintenance Technician role within the company

Ask a question

The contact for this apprenticeship is:

BISHOP AUCKLAND COLLEGE

Richard Wright

Richard.Wright@bacoll.ac.uk

01325 313194

The reference code for this apprenticeship is VAC2000046234.

Apply now

Closes in 12 days (Wednesday 19 August 2026 at 11:59pm)