Engineering Maintenance Technician Apprentice - Electrical

MAJAS SWITCHGEAR LIMITED

Haydock Liverpool (WA11 9SR)

Closes in 11 days (Sunday 26 July 2026 at 11:59pm)

Posted on 14 July 2026

Print

Contents

Summary

Advanced Level 3 Engineering Maintenance Technician- Electrical.

Wage

£16,640 for your first year, then could increase depending on your age

National Minimum Wage rate for apprentices

Minimum wage rates (opens in new tab)

Training course
Engineering maintenance technician - single discipline (level 3)
Hours
40 Hours Per Week Monday- Thursday 07.00- 16.00 30 min unpaid lunch Friday 07.00- 13.00 This equates to 8.5 hrs x 4 = 34 + 6 (Friday) = 40 hrs.

40 hours a week

Start date

Monday 21 September 2026

Duration

3 years 6 months

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

Working closely with experienced and qualified staff you will develop your knowledge of low voltage switchgear products, read, and interpret schematics / drawings, control panel layout and fitting, wiring cabinets and switchgear electrical repairs

Where you'll work

Unit 5 Wilcock Road
Old Boston Trading Estate
Haydock Liverpool
WA11 9SR

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

NORTH WEST TRAINING COUNCIL

Training course

Engineering maintenance technician - single discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or update documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen) with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.
  • Electrical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical. Select, check, and use electrical maintenance tools, measurement, and test equipment.
  • Electrical. Use electrical diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical. Apply problem solving and critical reasoning techniques.
  • Electrical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical. Remove and replace electrical parts.
  • Electrical. Prepare and terminate electrical cables.
  • Electrical. Set up, align and adjust electrical aspects of plant.
  • Electrical. Clean parts. For example, removal of dust and debris.
  • Electrical. Conduct and confirm electrical and connected services deisolation.
  • Electrical. Conduct functional testing.
  • Control and instrumentation. Conduct and confirm safe isolation of connected services
  • Control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Control and instrumentation. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
  • Control and instrumentation. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
  • Control and instrumentation. Apply problem solving and critical reasoning techniques.
  • Control and instrumentation. Inspect and test control and instrumentation systems.
  • Control and instrumentation. Check calibration and make adjustments.
  • Control and instrumentation. Check loop function.
  • Control and instrumentation. Set up and adjust control and instrumentation systems.
  • Control and instrumentation. Clean parts. For example, removal of dust and debris.
  • Control and instrumentation. Remove and replace instruments and sensors.
  • Control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
  • Control and instrumentation. Conduct and confirm electrical and connected services deisolation.
  • Control and instrumentation. Conduct functional testing.
  • Mechanical. Check and confirm safe isolation of connected services.
  • Mechanical. Select, check, and use mechanical maintenance tools and equipment.
  • Mechanical. Use mechanical diagnostic equipment and apply fault finding and rectification techniques.
  • Mechanical. Apply problem solving and critical reasoning techniques.
  • Mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
  • Mechanical. Remove and replace mechanical parts.
  • Mechanical. Examine mechanical parts for defects. For example, pump seals.
  • Mechanical. Set up, align, and adjust mechanical aspects of plant.
  • Mechanical. Clean parts. For example, removal of dust and debris.
  • Mechanical. Lubricate mechanical assemblies.
  • Mechanical. Confirm electrical and connected services deisolation.
  • Mechanical. Conduct functional testing.
  • Mechanical. Apply bench fitting techniques.
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or update documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen) with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.

Training schedule

You will work towards achieving a Level 3 advanced Engineering Maintenance Technician - Electrical apprenticeship, attending NWTC Training Centre on day release, for training and Further Education. The remainder of your time will be spent with your employer training whilst employed. NWTC will monitor your Apprenticeship on a regular basis to ensure you achieve the standards required including core skills, knowledge and occupational behaviours in preparation for End point assessment and where required Functional Skills

Requirements

Essential qualifications

GCSE in:

  • English (grade C/4 or above)
  • Maths (grade C/4 or above)
  • Plus 2 additional technical subjects. (grade C/4 or above)
  • Science (grade C/4 or above)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • Attention to detail
  • Organisation skills
  • Customer care skills
  • Problem solving skills
  • Logical
  • Team working
  • Initiative

About this employer

  • MAJAS Switchgear Limited are specialists in the custom design of electrical switchgear products and have the skills and knowledge within a fully integrated engineering team to manage projects from initial design and evaluation through to final installation. From our manufacturing facility in Haydock we design, manufacture and distribute low voltage switchgear products for commercial and industrial applications around the world.

http://www.majasswitchgear.com (opens in new tab)

After this apprenticeship

Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).

  • At the end of the apprenticeship, candidates will be suitably trained and continue their employment dependant on the business needs at the time
  • Further in-house and external training and development available
  • Potential L4 / HNC for the right candidate at the right time

Ask a question

The contact for this apprenticeship is:

NORTH WEST TRAINING COUNCIL

The reference code for this apprenticeship is VAC2000042378.

Apply now

Closes in 11 days (Sunday 26 July 2026 at 11:59pm)