Apprentice Engineering Maintenance Technician

PIL MEMBRANES LIMITED

Norfolk (PE30 2HS)

Closes in 15 days (Friday 31 July 2026 at 11:59pm)

Posted on 15 July 2026

Print

Contents

Summary

Working with experienced engineers, you’ll gain hands-on experience in electrical & mechanical maintenance, fault finding, preventative maintenance etc within a modern manufacturing environment. A fantastic opportunity to achieve a recognised qualification & build valuable skills with excellent development opportunities.

Wage

£14,976 for your first year, then could increase depending on your age

National Minimum Wage rate for apprentices

Minimum wage rates (opens in new tab)

Apprenticeship wage during first year of apprenticeship

Age-appropriate minimum wage thereafter

Training course
Engineering maintenance technician - dual discipline (level 3)
Hours
Monday to Friday 8am- 4pm 36.25 hours per week

36 hours a week

Start date

Tuesday 1 September 2026

Duration

4 years

Positions available

2

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

  • Working alongside experienced engineers to learn electrical and mechanical maintenance techniques
  • Carrying out planned preventative maintenance (PPM) activities on manufacturing equipment
  • Assisting with fault finding, diagnosis, and repair of electrical and mechanical systems
  • Learning how to safely use engineering tools, equipment, and diagnostic instruments
  • Supporting the installation, testing, and commissioning of machinery and equipment
  • Developing an understanding of PLCs, motors, sensors, pneumatics, and hydraulic systems
  • Following health, safety, and environmental procedures always
  • Maintaining accurate maintenance records and completing apprenticeship coursework
  • Participating in continuous improvement activities to help improve equipment reliability and performance
  • Building the knowledge, skills, and behaviours required to achieve the Level 3 Engineering Maintenance Technician apprenticeship standard

Where you'll work

Estuary
Road
King's Lynn
Norfolk
PE30 2HS

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

THE COLLEGE OF WEST ANGLIA

Training course

Engineering maintenance technician - dual discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.
  • Electrical and control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and control and instrumentation. Select, check, and use electrical maintenance tools, measurement, and test equipment. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
  • Electrical and control and instrumentation. Use electrical diagnostic equipment and apply fault finding and rectification techniques. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and control and instrumentation. Apply problem solving and critical reasoning techniques.
  • Electrical and control and instrumentation. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and control and instrumentation. Remove and replace electrical parts.
  • Electrical and control and instrumentation. Prepare and terminate electrical cables.
  • Electrical and control and instrumentation. Set up and adjust electrical aspects of plant.
  • Electrical and control and instrumentation. Clean parts. For example, removal of dust and debris.
  • Electrical and control and instrumentation. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and control and instrumentation. Conduct functional testing.
  • Electrical and control and instrumentation. Inspect and test control and instrumentation systems.
  • Electrical and control and instrumentation. Check calibration and make adjustments.
  • Electrical and control and instrumentation. Check loop function.
  • Electrical and control and instrumentation. Set up and adjust control and instrumentation systems.
  • Electrical and control and instrumentation. Remove and replace instruments and sensors.
  • Electrical and control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
  • Electrical and mechanical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and mechanical. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and mechanical. Select, check, and use electrical and mechanical maintenance tools, measurement, and test equipment.
  • Electrical and mechanical. Use electrical and mechanical diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and mechanical. Apply problem solving and critical reasoning techniques.
  • Electrical and mechanical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and mechanical. Remove and replace electrical parts.
  • Electrical and mechanical. Prepare and terminate electrical cables.
  • Electrical and mechanical. Set up, align, and adjust electrical aspects of plant.
  • Electrical and mechanical. Clean parts. For example, removal of dust and debris.
  • Electrical and mechanical. Conduct functional testing.
  • Electrical and mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
  • Electrical and mechanical. Remove and replace mechanical parts.
  • Electrical and mechanical. Examine mechanical parts for defects. For example, pump seals.
  • Electrical and mechanical. Set up, align, and adjust mechanical aspects of plant.
  • Electrical and mechanical. Lubricate mechanical assemblies.
  • Electrical and mechanical. Apply bench fitting techniques.
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.

Training schedule

  • College Day release
  • One day a week, remaining hours in the work place.
  • Level 3- Engineering Maintenance Technician (Electrical & Mechanical) Apprenticeship

Requirements

Essential qualifications

GCSE in:

  • 3 other subjects (grade 9-4/A*-C)
  • English & maths (grade 9-4/A*-C)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • Logical
  • Interest in how machines work
  • Interest in how equipment work
  • Interest in how systems work
  • Ability to use tools safely
  • Good listening skills
  • Willing to follow instructions
  • Work effectively with others
  • Strong work ethic
  • Reliable & punctual
  • Willing to learn
  • Open to feedback
  • Understand importance of H&S
  • Follows procedures
  • Enthusiastic & proactive
  • Able to work independently
  • Know when need to seek help

Other requirements

Proficient with Microsoft Office (Excel/Work/Outlook)

Desirable- Maintenance Experience

About this employer

PIL Membranes design, manufacture and test unique polymer membranes for the clothing, electronic, military, and medical markets. Specialise in water vapour transmission products with a range of applications such as leather effect membranes for children’s school shoes; technical and industrial clothing (including anti-static, viral barrier, fire- and chemical-retardant garments); and sports and leisure footwear and apparel.

https://www.pilmembranes.com/ (opens in new tab)

After this apprenticeship

Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).

  • Progression to Maintenance Engineer technician

Ask a question

The contact for this apprenticeship is:

THE COLLEGE OF WEST ANGLIA

Robert Berycz

rberycz@pilmembranes.com

01553622000

The reference code for this apprenticeship is VAC2000041315.

Apply now

Closes in 15 days (Friday 31 July 2026 at 11:59pm)