Apprentice Engineering Maintenance Technician

Oregon Timber Frame (England) Limited

Derby (DE24 9SR)

Closes in 11 days (Friday 26 June 2026 at 11:59pm)

Posted on 15 June 2026

---

Summary

We are looking for an enthusiastic and dedicated Apprentice Maintenance Engineer to join our team. This is a fantastic opportunity for someone eager to learn and develop essential engineering skills within a practical, hands-on environment.

• Wage:

  £15,184 for your first year, then could increase depending on your age

  National Minimum Wage rate for apprentices

  Minimum wage rates (opens in new tab)

• Training course: Engineering maintenance technician - dual discipline (level 3)
• Hours: Monday to Friday, 8.30am - 5.00pm. 30 minutes lunch break.

  36 hours 30 minutes a week

• Start date:

  Tuesday 1 September 2026

• Duration:

  4 years

• Positions available:

  1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

•  As an apprentice, you will receive on-the-job training and support from experienced engineers, while also attending formal education to gain qualifications in engineering. You will assist with the maintenance, repair, and improvement of machinery, equipment, and systems to ensure the smooth operation of our facility.
• Assist in performing preventative maintenance and repairs on equipment, machinery, and systems across the facility.
• Learn to diagnose and troubleshoot mechanical and electrical faults under the guidance of senior engineers.
• Support with routine inspections and maintenance tasks, ensuring compliance with health and safety regulations.
• Help with the installation and testing of new equipment or machinery.
• Record and document maintenance activities, including repairs, inspections, and parts used.
• Participate in projects related to machinery upgrades, improvements, and modifications.
• Maintain a clean and organised work environment and follow safe working practices at all times.
• Attend training sessions and workshops to develop technical skills and gain relevant qualifications.
• Contribute to a collaborative team environment, offering ideas and suggestions to improve operations.

Where you'll work

Oak House
1 Pioneer Way
Derby
DE24 9SR

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

DCG

Training course

Engineering maintenance technician - dual discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents

• Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
• Use planning, prioritising, organising, and time management techniques to plan tasks.
• Identify and organise resources to complete tasks. For example, consumables.
• Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
• Identify equipment to work on. Check plant configuration is as defined.
• Prepare the work area for maintenance tasks.
• Identify environmental and health and safety hazards and risks and apply control measures.
• Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
• Follow security procedures. For example, site access, document classification, and securing assets.
• Follow emergency incident and response procedures.
• Apply sustainability principles. For example, minimising waste.
• Segregate items for reuse, recycling, and waste.
• Use mathematical principles and formulae to support engineering maintenance.
• Apply engineering maintenance standards and procedures.
• Apply foreign material exclusion procedures.
• Follow maintenance tools and equipment control procedures. For example, handling and storage.
• Reinstate the work area.
• Apply team working principles.
• Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
• Escalate issues outside limits of responsibility.
• Record information.
• Produce or amend documents. For example, handover notes and reports.
• Identify and highlight issues (red pen), with technical drawings.
• Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
• Apply continuous improvement techniques to identify improvement suggestions.
• Carry out and record planned and unplanned learning and development activities.
• Electrical and control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
• Electrical and control and instrumentation. Select, check, and use electrical maintenance tools, measurement, and test equipment. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
• Electrical and control and instrumentation. Use electrical diagnostic equipment and apply fault finding and rectification techniques. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
• Electrical and control and instrumentation. Apply problem solving and critical reasoning techniques.
• Electrical and control and instrumentation. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
• Electrical and control and instrumentation. Remove and replace electrical parts.
• Electrical and control and instrumentation. Prepare and terminate electrical cables.
• Electrical and control and instrumentation. Set up and adjust electrical aspects of plant.
• Electrical and control and instrumentation. Clean parts. For example, removal of dust and debris.
• Electrical and control and instrumentation. Conduct and confirm electrical and connected services isolation and deisolation.
• Electrical and control and instrumentation. Conduct functional testing.
• Electrical and control and instrumentation. Inspect and test control and instrumentation systems.
• Electrical and control and instrumentation. Check calibration and make adjustments.
• Electrical and control and instrumentation. Check loop function.
• Electrical and control and instrumentation. Set up and adjust control and instrumentation systems.
• Electrical and control and instrumentation. Remove and replace instruments and sensors.
• Electrical and control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
• Electrical and mechanical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
• Electrical and mechanical. Conduct and confirm electrical and connected services isolation and deisolation.
• Electrical and mechanical. Select, check, and use electrical and mechanical maintenance tools, measurement, and test equipment.
• Electrical and mechanical. Use electrical and mechanical diagnostic equipment and apply fault finding and rectification techniques.
• Electrical and mechanical. Apply problem solving and critical reasoning techniques.
• Electrical and mechanical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
• Electrical and mechanical. Remove and replace electrical parts.
• Electrical and mechanical. Prepare and terminate electrical cables.
• Electrical and mechanical. Set up, align, and adjust electrical aspects of plant.
• Electrical and mechanical. Clean parts. For example, removal of dust and debris.
• Electrical and mechanical. Conduct functional testing.
• Electrical and mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
• Electrical and mechanical. Remove and replace mechanical parts.
• Electrical and mechanical. Examine mechanical parts for defects. For example, pump seals.
• Electrical and mechanical. Set up, align, and adjust mechanical aspects of plant.
• Electrical and mechanical. Lubricate mechanical assemblies.
• Electrical and mechanical. Apply bench fitting techniques.
• Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
• Use planning, prioritising, organising, and time management techniques to plan tasks.
• Identify and organise resources to complete tasks. For example, consumables.
• Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
• Identify equipment to work on. Check plant configuration is as defined.
• Prepare the work area for maintenance tasks.
• Identify environmental and health and safety hazards and risks and apply control measures.
• Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
• Follow security procedures. For example, site access, document classification, and securing assets.
• Follow emergency incident and response procedures.
• Apply sustainability principles. For example, minimising waste.
• Segregate items for reuse, recycling, and waste.
• Use mathematical principles and formulae to support engineering maintenance.
• Apply engineering maintenance standards and procedures.
• Apply foreign material exclusion procedures.
• Follow maintenance tools and equipment control procedures. For example, handling and storage.
• Reinstate the work area.
• Apply team working principles.
• Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
• Escalate issues outside limits of responsibility.
• Record information.
• Produce or amend documents. For example, handover notes and reports.
• Identify and highlight issues (red pen), with technical drawings.
• Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
• Apply continuous improvement techniques to identify improvement suggestions.
• Carry out and record planned and unplanned learning and development activities.

Training schedule

This training schedule has not been finalised. Check with this employer if you’ll need to travel to a college or training location for this apprenticeship.

Requirements

Essential qualifications

GCSE in:

• English (grade C/4 or above or equivalent)
• Maths (grade C/4 or above or equivalent)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

• Passion for engineering
• Passion for technology
• Strong problem-solving mindset
• Eager to learn and develop
• Excellent attention to detail
• Methodical and organised
• Effective team communication
• Positive, proactive attitude
• Embraces new challenges
• Basic technical knowledge

Other requirements

There will be manual involved and some outdoor work, and facility maintenance, general maintenance of the building. If we are interested in taking your application further, you will receive an email from a Derby College email address (@derby-college.ac.uk). Please make sure that you check your inbox as well as your spam/junk folders, so you do not miss out on the opportunity to apply. We reserve the right to close this vacancy before the specified closing date should we receive sufficient applications. In order to avoid missing an opportunity to apply please submit your application as early as possible.

About this employer

Oregon, established in 1998 and now part of Barratt Group PLC, specialises in the design, manufacture and erection of structural timber frame packages.

https://www.oregon.co.uk (opens in new tab)

Company benefits

33 days holiday entitlement per annum, January to December.

Disability Confident

A fair proportion of interviews for this apprenticeship will be offered to applicants with a disability or long-term health condition. This includes non-visible disabilities and conditions.

You can choose to be considered for an interview under the Disability Confident scheme. You’ll need to meet the essential requirements to be considered for an interview.

After this apprenticeship

Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).

Qualified Maintenance Technician.

Ask a question

The contact for this apprenticeship is:

DCG

Lauren Stapleton

lauren.stapleton@derby-college.ac.uk

01332387420

The reference code for this apprenticeship is VAC2000036985.

Apply now

Closes in 11 days (Friday 26 June 2026 at 11:59pm)