CES Engineering Maintenance Technician Apprentice - Electrical

CENTRICA PLC

Easington (HU12 0SX)

Closes in 13 days (Friday 5 June 2026 at 11:59pm)

Posted on 22 May 2026

Print

Contents

Summary

To train alongside our existing experienced team of engineers on all aspects of operational and maintenance engineering.

Wage

£16,640 to £26,436.80, depending on your age

National Minimum Wage

Minimum wage rates (opens in new tab)

National Living Wage

Training course
Engineering maintenance technician - single discipline (level 3)
Hours
First year spent off the job at CATCH in Stallingborough. This would be Monday - Friday 8am - 4pm. Second and third year onwards is on site at Centrica - Easington Terminal site, Dimlington Road, Easington, HU12 0SX.

40 hours a week

Start date

Monday 21 September 2026

Duration

3 years 6 months

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

  • Study a range of programmes working towards a level 3 engineering maintenance technician apprenticeship standard 
  • Installation, testing, servicing, removal, replacement, maintenance, and repair of a range of control & instrumentation equipment (partaking in planned preventative and reactive maintenance programmes)
  • May also undertake decommissioning activities when plant is being removed from service
  • As a ‘top tier’ COMAH (Control of Major Accident Hazards) site - actively support, demonstrate and promote the company’s ‘culture of care’, lifesaving, office and house rules
  • Willing to learn new skills, and practically minded

Where you'll work

Easington Terminal
Dimlington Road
Easington
HU12 0SX

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

HCF CATCH LIMITED

Training course

Engineering maintenance technician - single discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or update documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen) with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.
  • Electrical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical. Select, check, and use electrical maintenance tools, measurement, and test equipment.
  • Electrical. Use electrical diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical. Apply problem solving and critical reasoning techniques.
  • Electrical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical. Remove and replace electrical parts.
  • Electrical. Prepare and terminate electrical cables.
  • Electrical. Set up, align and adjust electrical aspects of plant.
  • Electrical. Clean parts. For example, removal of dust and debris.
  • Electrical. Conduct and confirm electrical and connected services deisolation.
  • Electrical. Conduct functional testing.
  • Control and instrumentation. Conduct and confirm safe isolation of connected services
  • Control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Control and instrumentation. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
  • Control and instrumentation. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
  • Control and instrumentation. Apply problem solving and critical reasoning techniques.
  • Control and instrumentation. Inspect and test control and instrumentation systems.
  • Control and instrumentation. Check calibration and make adjustments.
  • Control and instrumentation. Check loop function.
  • Control and instrumentation. Set up and adjust control and instrumentation systems.
  • Control and instrumentation. Clean parts. For example, removal of dust and debris.
  • Control and instrumentation. Remove and replace instruments and sensors.
  • Control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
  • Control and instrumentation. Conduct and confirm electrical and connected services deisolation.
  • Control and instrumentation. Conduct functional testing.
  • Mechanical. Check and confirm safe isolation of connected services.
  • Mechanical. Select, check, and use mechanical maintenance tools and equipment.
  • Mechanical. Use mechanical diagnostic equipment and apply fault finding and rectification techniques.
  • Mechanical. Apply problem solving and critical reasoning techniques.
  • Mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
  • Mechanical. Remove and replace mechanical parts.
  • Mechanical. Examine mechanical parts for defects. For example, pump seals.
  • Mechanical. Set up, align, and adjust mechanical aspects of plant.
  • Mechanical. Clean parts. For example, removal of dust and debris.
  • Mechanical. Lubricate mechanical assemblies.
  • Mechanical. Confirm electrical and connected services deisolation.
  • Mechanical. Conduct functional testing.
  • Mechanical. Apply bench fitting techniques.
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or update documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen) with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.

Training schedule

Engineering Maintenance Technician - single discipline - Level 3.

The apprenticeship follows a 3-year programme, with the first year spent off the job at CATCH in Stallingborough. This would be Monday - Friday 8am - 4pm.

Requirements

Essential qualifications

GCSE in:

  • English (grade Level 4)
  • Maths (grade Level 4)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • Attention to detail
  • Organisation skills
  • Problem solving skills
  • Logical
  • Team working
  • Initiative

About this employer

We operate the Rough gas storage facility in the Southern North Sea and the Easington onshore gas processing terminal in East Yorkshire, having restarted storage operations at Rough in 2022 to bolster the UK's energy security and help reduce consumer bills.

Today, Rough provides half of the UK's gas storage, being able to store 54 bcf of gas - enough to provide the equivalent volume of gas to heat 2.4 million homes over winter.

The long term aim for Centrica Storage Limited is to turn Rough into the largest long duration energy storage facility in Europe, capable of storing both natural gas and hydrogen with the goal of bolstering the UK’s energy security.

http://www.centrica.com (opens in new tab)

Company benefits

Competitive benefits.

After this apprenticeship

Successful completion of the apprenticeship could lead to a higher-level apprenticeship or full-time employment for the right candidate. You will have developed a variety of interchangeable skills and have an in depth understanding of manufacturing and processes.

Ask a question

The contact for this apprenticeship is:

HCF CATCH LIMITED

Adele Kennedy

adele.kennedy@catchuk.org

01469552861

The reference code for this apprenticeship is VAC2000033061.

Apply now

Closes in 13 days (Friday 5 June 2026 at 11:59pm)