Mechanical Apprentice

EET Fuels

Cheshire (CH65 4HB)

Closes on Friday 10 April 2026

Posted on 23 February 2026

Print

Contents

Summary

Are you ready to roll up your sleeves and dive into the world of engineering? At EET Fuels, we’re on the lookout for an enthusiastic Maintenance Apprentices to join our skilled and supportive team. This is your chance to gain hands-on experience maintaining cutting-edge manufacturing equipment.

Wage

£15,704 for your first year, then could increase depending on your age

National Minimum Wage rate for apprentices

Check minimum wage rates (opens in new tab)

Training course
Engineering maintenance technician - single discipline (level 3)
Hours
Monday - Friday, 08:00 - 16:00.

40 hours a week

Start date

Friday 24 April 2026

Duration

3 years 6 months

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

What You’ll Be Doing:

  • Assisting with planned preventative maintenance
  • Learning to perform basic repairs and diagnostics
  • Developing a wide range of technical maintenance skills 
  • Following strict safety procedures and keeping your workspace organised

Where you'll work

The Administration Building 5th Floor
Stanlow Manufacturing Complex
Ellesmere Port
Cheshire
CH65 4HB

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

CHESHIRE COLLEGE SOUTH AND WEST

Training course

Engineering maintenance technician - single discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or update documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen) with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.
  • Electrical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical. Select, check, and use electrical maintenance tools, measurement, and test equipment.
  • Electrical. Use electrical diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical. Apply problem solving and critical reasoning techniques.
  • Electrical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical. Remove and replace electrical parts.
  • Electrical. Prepare and terminate electrical cables.
  • Electrical. Set up, align and adjust electrical aspects of plant.
  • Electrical. Clean parts. For example, removal of dust and debris.
  • Electrical. Conduct and confirm electrical and connected services deisolation.
  • Electrical. Conduct functional testing.
  • Control and instrumentation. Conduct and confirm safe isolation of connected services
  • Control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Control and instrumentation. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
  • Control and instrumentation. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
  • Control and instrumentation. Apply problem solving and critical reasoning techniques.
  • Control and instrumentation. Inspect and test control and instrumentation systems.
  • Control and instrumentation. Check calibration and make adjustments.
  • Control and instrumentation. Check loop function.
  • Control and instrumentation. Set up and adjust control and instrumentation systems.
  • Control and instrumentation. Clean parts. For example, removal of dust and debris.
  • Control and instrumentation. Remove and replace instruments and sensors.
  • Control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
  • Control and instrumentation. Conduct and confirm electrical and connected services deisolation.
  • Control and instrumentation. Conduct functional testing.
  • Mechanical. Check and confirm safe isolation of connected services.
  • Mechanical. Select, check, and use mechanical maintenance tools and equipment.
  • Mechanical. Use mechanical diagnostic equipment and apply fault finding and rectification techniques.
  • Mechanical. Apply problem solving and critical reasoning techniques.
  • Mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
  • Mechanical. Remove and replace mechanical parts.
  • Mechanical. Examine mechanical parts for defects. For example, pump seals.
  • Mechanical. Set up, align, and adjust mechanical aspects of plant.
  • Mechanical. Clean parts. For example, removal of dust and debris.
  • Mechanical. Lubricate mechanical assemblies.
  • Mechanical. Confirm electrical and connected services deisolation.
  • Mechanical. Conduct functional testing.
  • Mechanical. Apply bench fitting techniques.
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or update documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen) with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.

Training schedule

The candidate will follow a Level 3 Apprenticeship programme and study towards an Engineering Maintenance Technician qualification. This training will be structured and delivered by Cheshire College – South & West.

If you do not already hold GCSEs at grade A-C / 8-4 in English and Maths you will complete Functional Skills in the related subjects to attain Level 2 Functional Skills.

Requirements

Essential qualifications

GCSE in:

  • English (grade C/4)
  • Maths (grade C/4)
  • Science (grade C/4)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • Organisation skills
  • Problem solving skills
  • Team working
  • Initiative

Other requirements

Must be able to commute to Stanlow Oil Refinery daily and to Cheshire College South & West. Driving Licence would be beneficial.

About this employer

EET Fuels is a leading player in the decarbonisation of the UK economy through its delivery of an energy transition hub at Stanlow in the heart of the North West near Liverpool, Chester and Manchester. Stanlow is a strategic refinery producing vital fuels for UK transportation – around 16% of road fuels are produced here. The process of making refined products is carbon intensive, and, like most refineries, Stanlow is therefore a substantial emitter of CO2. We will continue manufacturing these vital, hard-to-abate fuels to customers but are significantly reducing the CO2 emissions associated with them.

After this apprenticeship

The opportunity to progress onto a HNC qualification.

Ask a question

The contact for this apprenticeship is:

CHESHIRE COLLEGE SOUTH AND WEST

Becky Smythe

becky.smythe@ccsw.ac.uk

The reference code for this apprenticeship is VAC2000017232.

Apply now

Closes on Friday 10 April 2026