Car and Light Vehicle Apprentice
ROY WINDEBANK AUTO ENGINEERS
WALLINGFORD (OX10 9LJ)
Closes on Friday 27 March 2026
Posted on 20 February 2026
Contents
Summary
We are looking for a motivated apprentice to join our busy workshop.
You will work alongside experienced technicians diagnosing, repairing and maintaining a wide range of vehicles.
If you are practical, reliable with good time keeping and genuinely interested in the motor trade, we want to hear from you.
- Wage
-
£17,680 a year
- Training course
- Autocare technician (level 2)
- Hours
-
5 days a week Monday to Friday 8.00am to 5.30pm.
42 hours 30 minutes a week
- Start date
-
Monday 6 July 2026
- Duration
-
1 year 6 months
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
- Assist technicians with servicing and repairs.
- Carry out routine vehicle servicing (Oil, filters, brakes etc)
- Learn and assist with diagnostic procedures
- Complete vehicle health checks
- Help with MOT preparation work
- Remove and refit components under supervision
- Maintain a clean and safe working area
- Use workshop tools and equipment correctly
- Complete apprenticeship coursework and training requirements
- Follow workshop processes and Health & Safety Procedures.
Where you'll work
KENTWOOD FARM
PAPIST WAY
CHOLSEY
WALLINGFORD
OX10 9LJ
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
ABINGDON AND WITNEY COLLEGE
Training course
Autocare technician (level 2)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Comply with health and safety procedures in the workplace in compliance with regulations, standards, and guidance.
- Prepare the vehicle and working area before the work activity. For example, remove or mitigate slip and trip hazards.
- Maintain and restore the work area during and on completion of the activity.
- Store, maintain, including calibration checks, and return tools and equipment to storage.
- Access vehicle technical data to inform inspections and make judgements on wear and serviceability.
- Comply with environmental and sustainability procedures, regulations, standards, and guidance. Segregate resources for reuse, recycling, and disposal.
- Apply vehicle safety inspection and routine maintenance procedures using vehicle specific data on car, car derived van or light goods vehicle.
- Select and use tools and equipment, mechanical and electrical measuring tools, and diagnostic equipment.
- Remove, repair and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
- Inspect, remove, and replace of parts or components in cars, car derived vans, or light goods vehicles for the following: steering systems and suspension systems, braking systems, emission systems, air conditioning systems, battery and charging systems, fluid and filtration systems.
- Apply state-of-health condition monitoring tests to high voltage batteries and chargers for electrified cars, car derived vans, or light goods vehicles.
- Apply four-wheel geometry checks and adjustments to cars, car derived vans, and light goods vehicles.
- Apply safe working practices and procedures to isolate electrified vehicles for maintenance.
- Record vehicle service maintenance, parts replacement, or repair.
- Apply customer service principles and organisational customer care practices. For example, identifying customer and vehicle needs, resolve low level customer complaints, make recommendations to customers based on results of inspection, maintenance, or repair of vehicles, customer payment transactions and organisational sales processes.
- Provide quotation of cost and order automotive parts, products, and consumables applicable to the vehicle.
- Apply procedures for stock and parts storage: ordering, checking and stock rotation.
- Apply organisational sales processes. For example, show and tell, features and benefits, consultative selling, mini closing and closing.
- Apply team working principles.
- Comply with equity, diversity, and inclusion guidance.
- Communicate with others verbally, for example customers, suppliers, and colleagues.
- Communicate in writing, for example with internal and external customers, colleagues, and managers.
- Use information and digital technology systems. Comply with GDPR and cyber security.
- Complete and record learning and development activities.
- Apply procedures to check and replace fluids, and filtration parts.
- Comply with health and safety procedures in the workplace in compliance with regulations, standards, and guidance.
- Prepare the vehicle and working area before the work activity. For example, remove or mitigate slip and trip hazards.
- Maintain and restore the work area during and on completion of the activity.
- Store, maintain, including calibration checks, and return tools and equipment to storage.
- Access vehicle technical data to inform inspections and make judgements on wear and serviceability.
- Comply with environmental and sustainability procedures, regulations, standards, and guidance. Segregate resources for reuse, recycling, and disposal.
- Apply vehicle safety inspection and routine maintenance procedures using vehicle specific data on car, car derived van or light goods vehicle.
- Select and use tools and equipment, mechanical and electrical measuring tools, and diagnostic equipment.
- Remove, repair and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
- Inspect, remove, and replace of parts or components in cars, car derived vans, or light goods vehicles for the following: steering systems and suspension systems, braking systems, emission systems, air conditioning systems, battery and charging systems, fluid and filtration systems.
- Apply state-of-health condition monitoring tests to high voltage batteries and chargers for electrified cars, car derived vans, or light goods vehicles.
- Apply four-wheel geometry checks and adjustments to cars, car derived vans, and light goods vehicles.
- Apply safe working practices and procedures to isolate electrified vehicles for maintenance.
- Record vehicle service maintenance, parts replacement, or repair.
- Apply customer service principles and organisational customer care practices. For example, identifying customer and vehicle needs, resolve low level customer complaints, make recommendations to customers based on results of inspection, maintenance, or repair of vehicles, customer payment transactions and organisational sales processes.
- Provide quotation of cost and order automotive parts, products, and consumables applicable to the vehicle.
- Apply procedures for stock and parts storage: ordering, checking and stock rotation.
- Apply organisational sales processes. For example, show and tell, features and benefits, consultative selling, mini closing and closing.
- Apply team working principles.
- Comply with equity, diversity, and inclusion guidance.
- Communicate with others verbally, for example customers, suppliers, and colleagues.
- Communicate in writing, for example with internal and external customers, colleagues, and managers.
- Use information and digital technology systems. Comply with GDPR and cyber security.
- Complete and record learning and development activities.
- Apply procedures to check and replace fluids, and filtration parts.
Training schedule
Please apply as soon as possible for this role. Should the right candidate be found prior to the closing date, then the vacancy may be closed early.
Apprenticeship Assessment and Information Session:
Any new person applying for apprenticeship roles where Abingdon and Witney College deliver the training will be required to attend an Apprenticeship Assessment and Information Session at Witney or Abingdon campus.
This will consist of a series of initial assessments (required prior to any apprenticeship offer), completion of essential paperwork, the opportunity to find out more about the apprenticeship process, the training included, and a forum for your questions.
As a new apprenticeship applicant, you will only have to undergo this process once. If you would like to talk to us about the assessments or if you would need any extra support to attend the Apprenticeship Assessment and Information Session, please call us on 01235 216216.
Qualification checks:
By applying for this vacancy, you are giving Abingdon and Witney College permission to undertake a Learner Record Service check on your previous qualifications. We make every effort to ensure that applicants from non-traditional academic backgrounds or those who may not have the formal GCSE entry requirements can access apprenticeships where possible.
The National Minimum Wage (NMW) for Apprentices is £8.00 per hour from April 2026. This applies to 16 - 18 year old apprentices and those aged 19 and over during the first year of their apprenticeship. After this, the National Minimum wage appropriate to their age applies. The Wage for apprentices applies to both time spent on the job plus time spent training.
Requirements
Essential qualifications
GCSE in:
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Attention to detail
- Customer care skills
- Problem solving skills
- Logical
- Team working
- Initiative
- Physical fitness
- Time keeping
Other requirements
- We are in a rural location but are near a train line stop Cholsey
- Work will involve heavy lifting and handling dirty components
- Some work is outside and in all weathers
About this employer
The garage is a family run business that has been trading for over 40 years.
We are a very busy local garage with strong support in the surrounding community.
https://roywindebank.co.uk/ (opens in new tab)
Company benefits
Company uniform provided
After this apprenticeship
- Structured training towards recognized qualifications
- Real Workshop experience
- Support from experienced technicians
- Clear progression route to qualified technician
Ask a question
The contact for this apprenticeship is:
ABINGDON AND WITNEY COLLEGE
Mike
apprenticeships@abingdon-witney.ac.uk
01235216216
The reference code for this apprenticeship is VAC2000017055.
Apply now
Closes on Friday 27 March 2026