Level 3 Electrical and Instrumentation Apprenticeship - Alrewas/Audley

NATIONAL GAS TRANSMISSION PLC

Burton-On-Trent (DE13 7DE)

Closes in 22 days (Sunday 8 March 2026)

Posted on 12 February 2026

Print

Contents

Summary

National Gas is the backbone of Britain's energy system. We're responsible for securing the UK's energy.

This is a four year Electrical and Instrumentation Apprenticeship based at our Alrewas site, where you’ll learn how to keep important gas site equipment working safely and reliably.

Wage

£24,242 a year

Check minimum wage rates (opens in new tab)

Starting annual salary of £24,242, with annual performance-based increases.

Training course
Engineering maintenance technician - dual discipline (level 3)
Hours
Monday to Friday, 9.00am to 5.00pm.

37 hours a week

Start date

Monday 7 September 2026

Duration

4 years

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

  • During the first two years of your apprenticeship, you’ll be based full‑time at TTE College in Ellesmere Port, living Monday to Friday alongside other apprentices from across the country. This weekday residential setup gives you focused time during the working week to grow your technical skills, build confidence and learn as part of a supportive cohort, while still returning home at weekends.
  • You’ll develop skills in:
    • Using modern electrical, control and monitoring technologies.
    • Carrying out routine maintenance on electrical and instrumentation equipment.
    • Working with pressure, flow and temperature sensors.
    • Fault finding with specialist tools and control system data.
    • Completing key health and safety tasks, including risk assessments.
  • Your day to day could include checking and calibrating sensors, testing circuits, diagnosing faults, supporting planned maintenance or helping technicians during equipment upgrades. No two days will be the same, and you’ll quickly grow your skills working with real equipment in real environments.

Where you'll work

Compressor Station
Kings Bromley Road, Alrewas
Burton-On-Trent
DE13 7DE

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

TTE TRAINING LIMITED

Training course

Engineering maintenance technician - dual discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.
  • Electrical and control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and control and instrumentation. Select, check, and use electrical maintenance tools, measurement, and test equipment. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
  • Electrical and control and instrumentation. Use electrical diagnostic equipment and apply fault finding and rectification techniques. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and control and instrumentation. Apply problem solving and critical reasoning techniques.
  • Electrical and control and instrumentation. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and control and instrumentation. Remove and replace electrical parts.
  • Electrical and control and instrumentation. Prepare and terminate electrical cables.
  • Electrical and control and instrumentation. Set up and adjust electrical aspects of plant.
  • Electrical and control and instrumentation. Clean parts. For example, removal of dust and debris.
  • Electrical and control and instrumentation. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and control and instrumentation. Conduct functional testing.
  • Electrical and control and instrumentation. Inspect and test control and instrumentation systems.
  • Electrical and control and instrumentation. Check calibration and make adjustments.
  • Electrical and control and instrumentation. Check loop function.
  • Electrical and control and instrumentation. Set up and adjust control and instrumentation systems.
  • Electrical and control and instrumentation. Remove and replace instruments and sensors.
  • Electrical and control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
  • Electrical and mechanical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and mechanical. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and mechanical. Select, check, and use electrical and mechanical maintenance tools, measurement, and test equipment.
  • Electrical and mechanical. Use electrical and mechanical diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and mechanical. Apply problem solving and critical reasoning techniques.
  • Electrical and mechanical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and mechanical. Remove and replace electrical parts.
  • Electrical and mechanical. Prepare and terminate electrical cables.
  • Electrical and mechanical. Set up, align, and adjust electrical aspects of plant.
  • Electrical and mechanical. Clean parts. For example, removal of dust and debris.
  • Electrical and mechanical. Conduct functional testing.
  • Electrical and mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
  • Electrical and mechanical. Remove and replace mechanical parts.
  • Electrical and mechanical. Examine mechanical parts for defects. For example, pump seals.
  • Electrical and mechanical. Set up, align, and adjust mechanical aspects of plant.
  • Electrical and mechanical. Lubricate mechanical assemblies.
  • Electrical and mechanical. Apply bench fitting techniques.
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.

Training schedule

During the first two years of your apprenticeship, you’ll be based full‑time at TTE College in Ellesmere Port, living Monday to Friday alongside other apprentices from across the country.

Requirements

Essential qualifications

GCSE in:

  • English Language (grade 4 or above)
  • Maths (grade 4 or above)
  • Science (grade 4 or above)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • Problem solving skills
  • Team working
  • Curious
  • Proactive
  • Willing to learn
  • Motivated

Other requirements

  • You’ll need to be comfortable with travel and overnight stays. This means that you’ll need to have a driving license by the time you would be joining us (September 2026!). 
  • You'll need to have permanent right to work in the UK for the entirety of this programme, as we are unable to offer visa sponsorship for this role.
  • As you’ll be working on Critical National Infrastructure, you’ll also need to pass enhanced National Security Vetting, meaning you’ll need to be able to provide a 5-year UK address history. Your eligibility for certain roles may be affected by your place of birth, nationality, current or former citizenship, and any residency you hold or have held.

About this employer

National Gas Transmission is the backbone of Britain’s energy system today and will play a leading role in the transition to a clean energy future that works for every home and business. We own and operate the national gas network, delivering energy to where it is needed in every part of the country.

Company benefits

  • Generous holiday allowance of 26 days plus statutory bank holidays
  • Pension scheme with a double-match contribution
  • Professional development and career progression
  • Employee assistance programme

After this apprenticeship

By the end of the programme, you’ll learn how to repair, test and maintain the electrical power, control and protection systems that keep our sites running safely. You’ll gain hands on experience with instrumentation, working on the sensors and monitoring tools that tell us how our pipes and compressors are performing, helping the whole network operate at its best.

Ask a question

The contact for this apprenticeship is:

TTE TRAINING LIMITED

The reference code for this apprenticeship is VAC2000015085.

Apply now

Closes in 22 days (Sunday 8 March 2026)

After signing in, you’ll apply for this apprenticeship on the company's website.