Apprentice Mechanic Technician
AUTOLEX MOTORS LTD
Crewe (CW1 6XU)
Closes in 14 days (Tuesday 25 November 2025 at 11:59pm)
Posted on 11 November 2025
Contents
Summary
Accelerate your career! Join Autolex Motors, a friendly family-run used car and service business. Become an apprentice covering brakes, diagnostics, tyres, and more. Start your journey in a quality, supportive environment. Apply today!
- Wage
-
£15,704 for your first year, then could increase depending on your age
National Minimum Wage rate for apprentices
- Training course
- Autocare technician (level 2)
- Hours
-
Monday to Friday, times to be confirmed.
40 hours a week
- Start date
-
Tuesday 9 December 2025
- Duration
-
2 years 6 months
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
Duties to included but not limited to:
- Fundamentals of specific vehicle systems including steering & suspension, braking systems, battery & charging systems, exhaust systems
- Assist with MOT
- How to carry out vehicle safety inspections and routine maintenance using manufacturers specifications or approved schedules, using vehicle specific data and meeting legal requirements
- Tyre legislation and technical information including EU Tyre labelling, Tyre Pressure Monitoring systems, sidewall markings, homologated fitments relating to cars, car derived vans and light goods vehicles
- Basic consumer legislation relevant to the occupation
- Appropriate Health & Safety legislation and requirements for the workplace
- Data protection requirements to protect customer and payment information
- How the business works and how you contribute to the overall results, demonstrating commercial awareness
Where you'll work
Unit 19-20
Third Avenue
Crewe
CW1 6XU
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
CHESHIRE COLLEGE SOUTH AND WEST
Training course
Autocare technician (level 2)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Comply with health and safety procedures in the workplace in compliance with regulations, standards, and guidance.
- Prepare the vehicle and working area before the work activity. For example, remove or mitigate slip and trip hazards.
- Maintain and restore the work area during and on completion of the activity.
- Store, maintain, including calibration checks, and return tools and equipment to storage.
- Access vehicle technical data to inform inspections and make judgements on wear and serviceability.
- Comply with environmental and sustainability procedures, regulations, standards, and guidance. Segregate resources for reuse, recycling, and disposal.
- Apply vehicle safety inspection and routine maintenance procedures using vehicle specific data on car, car derived van or light goods vehicle.
- Select and use tools and equipment, mechanical and electrical measuring tools, and diagnostic equipment.
- Remove, repair and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
- Inspect, remove, and replace of parts or components in cars, car derived vans, or light goods vehicles for the following: steering systems and suspension systems, braking systems, emission systems, air conditioning systems, battery and charging systems, fluid and filtration systems.
- Apply state-of-health condition monitoring tests to high voltage batteries and chargers for electrified cars, car derived vans, or light goods vehicles.
- Apply four-wheel geometry checks and adjustments to cars, car derived vans, and light goods vehicles.
- Apply safe working practices and procedures to isolate electrified vehicles for maintenance.
- Record vehicle service maintenance, parts replacement, or repair.
- Apply customer service principles and organisational customer care practices. For example, identifying customer and vehicle needs, resolve low level customer complaints, make recommendations to customers based on results of inspection, maintenance, or repair of vehicles, customer payment transactions and organisational sales processes.
- Provide quotation of cost and order automotive parts, products, and consumables applicable to the vehicle.
- Apply procedures for stock and parts storage: ordering, checking and stock rotation.
- Apply organisational sales processes. For example, show and tell, features and benefits, consultative selling, mini closing and closing.
- Apply team working principles.
- Comply with equity, diversity, and inclusion guidance.
- Communicate with others verbally, for example customers, suppliers, and colleagues.
- Communicate in writing, for example with internal and external customers, colleagues, and managers.
- Use information and digital technology systems. Comply with GDPR and cyber security.
- Complete and record learning and development activities.
- Apply procedures to check and replace fluids, and filtration parts.
- Comply with health and safety procedures in the workplace in compliance with regulations, standards, and guidance.
- Prepare the vehicle and working area before the work activity. For example, remove or mitigate slip and trip hazards.
- Maintain and restore the work area during and on completion of the activity.
- Store, maintain, including calibration checks, and return tools and equipment to storage.
- Access vehicle technical data to inform inspections and make judgements on wear and serviceability.
- Comply with environmental and sustainability procedures, regulations, standards, and guidance. Segregate resources for reuse, recycling, and disposal.
- Apply vehicle safety inspection and routine maintenance procedures using vehicle specific data on car, car derived van or light goods vehicle.
- Select and use tools and equipment, mechanical and electrical measuring tools, and diagnostic equipment.
- Remove, repair and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
- Inspect, remove, and replace of parts or components in cars, car derived vans, or light goods vehicles for the following: steering systems and suspension systems, braking systems, emission systems, air conditioning systems, battery and charging systems, fluid and filtration systems.
- Apply state-of-health condition monitoring tests to high voltage batteries and chargers for electrified cars, car derived vans, or light goods vehicles.
- Apply four-wheel geometry checks and adjustments to cars, car derived vans, and light goods vehicles.
- Apply safe working practices and procedures to isolate electrified vehicles for maintenance.
- Record vehicle service maintenance, parts replacement, or repair.
- Apply customer service principles and organisational customer care practices. For example, identifying customer and vehicle needs, resolve low level customer complaints, make recommendations to customers based on results of inspection, maintenance, or repair of vehicles, customer payment transactions and organisational sales processes.
- Provide quotation of cost and order automotive parts, products, and consumables applicable to the vehicle.
- Apply procedures for stock and parts storage: ordering, checking and stock rotation.
- Apply organisational sales processes. For example, show and tell, features and benefits, consultative selling, mini closing and closing.
- Apply team working principles.
- Comply with equity, diversity, and inclusion guidance.
- Communicate with others verbally, for example customers, suppliers, and colleagues.
- Communicate in writing, for example with internal and external customers, colleagues, and managers.
- Use information and digital technology systems. Comply with GDPR and cyber security.
- Complete and record learning and development activities.
- Apply procedures to check and replace fluids, and filtration parts.
Training schedule
The candidate will follow a Level 2 Apprenticeship programme and study towards a full Level 2 Standard as an Autocare Technician. This training will be structured and delivered by Cheshire College – South & West. If the candidate does not hold GCSE grades A*-D (9-3) or equivalent, they will be required to complete a Level 1 Functional Skill in the relevant subject.
Requirements
Desirable qualifications
GCSE in:
- English (grade C/4)
- Maths (grade C/4)
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Communication skills
- Attention to detail
- Problem solving skills
- Analytical skills
- Team working
About this employer
Autolex Motors is an independent, family-run business based in Crewe, Cheshire, dedicated to supplying quality, affordable used vehicles alongside expert mechanical services. With over 15 years of motor trade experience, including work with top leading brands such as Audi and BMW, the team at Autolex Motors has embedded customer satisfaction and professional transparency into their core ethos. Autolex Motors operates a full-service garage, offering a complete range of competitively priced services. Their facilities are equipped to handle MOT testing for Class 4 (Cars) and Class 7 (Vans), ensuring compliance with mandatory annual inspections. Their highly experienced staff provide general servicing, diagnostics, brake repair and fitting, tyre services, and all other essential mechanical repairs to keep vehicles running safely and efficiently.
After this apprenticeship
The apprentice by the end of the course should be able to join the team as a fully-fledged vehicle technician within the team. They should be able to progress in their career from this to become higher level technicians and progress in their career.
Ask a question
The contact for this apprenticeship is:
CHESHIRE COLLEGE SOUTH AND WEST
Becky Smythe
becky.smythe@ccsw.ac.uk
The reference code for this apprenticeship is VAC1000350712.
Apply now
Closes in 14 days (Tuesday 25 November 2025 at 11:59pm)
Sign in with your GOV.UK One Login to apply.