Welding Apprentice - GTR Welding
GTR Welding
Oldham (OL9 0QB)
Closes in 28 days (Friday 18 December 2026 at 11:59pm)
Posted on 19 November 2026
Contents
Summary
In this role you will manually weld with process MMA & TIG to NDT standards on pressure vessels & pipework.
- Wage
-
£16,224 to £25,775.88, depending on your age
National Minimum Wage
- Training course
- Plate welder (level 3)
- Hours
-
Monday to Friday – 8.00 am, to 4.00 pm core hours.
However, this role involves working away.
Overtime available.
39 hours a week
- Start date
-
Monday 4 January 2027
- Duration
-
3 years
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
In this role you will manually weld with process MMA & TIG to NDT standards on pressure vessels & pipework.
Key Responsibilities:
Manual Welding:
The primary task is to perform welding operations on various metal plates and pipework on pressure vessels and pipework using different welding techniques.
Quality Control:
Ensuring welds meet specific quality standards and specifications is crucial.
Material Preparation:
Preparing materials for welding, including cleaning, cutting, and ensuring proper alignment.
Welding Equipment Operation:
Operating and maintaining various welding equipment, including MIG, TIG, and stick welding machines.
Reading and Interpreting Drawings:
Understanding and interpreting technical drawings and specifications to accurately weld components.
Inspection and Testing:
Inspecting welds for defects and using precision measuring instruments to ensure accuracy.
Safety Compliance:
Adhering to all safety protocols and regulations related to welding and working in a metal fabrication environment.
Where you'll work
121 Chadderton Park Road
Chadderton
Oldham
OL9 0QB
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
ROCHDALE TRAINING ASSOCIATION LIMITED
Training course
Plate welder (level 3)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Work safely at all times, comply with health, safety and environmental legislation, regulations and organisational requirements.
- Can obtain, check and use appropriate documentation (such as job instructions, drawings, quality control documentation).
- Plan and prepare welding activities before commencing the work.
- Obtain, position and assemble welding equipment and associated safety protection needed for activity.
- Prepare, check and protect materials and work areas ready for welding.
- Inspect assembly to be welded and undertake remedial work to comply with specification, or implement quality steps if rejected.
- Receive, inspect, condition and maintain consumables.
- Set, test and monitor key welding parameters as detailed within the Welding Procedure Specification.
- Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
- Use manual processes and equipment to remove material (powered and non‐powered).
- Achieves a quality of work to meet international standards e.g. ISO5817, ISO9606, ASME IX, AWS D1.1 for dimensional, surface inspection (e.g. Visual, Magnetic Particle, Dye Penetrant) and volumetric inspection (e.g. Radiography, Ultrasonic inspection).
- Complete progressive and final checks on the weld prior to release for formal inspection and report into the production control system at the appropriate stages of the work activity.
- Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
- Produce welds in plate and/or structural components using two welding processes from TIG, PAW, MMA, MIG/MAG, FCAW.
- Produce welds in plate and/or structural components using two materials from Carbon Steel, Low Alloy Steel, High Alloy Ferritic/Martensitic Steel, Austenitic Stainless Steel, Nickel & Nickel Alloys, Aluminium & Aluminium alloys, Titanium & Titanium Alloys, Copper & Copper Alloys.
- Produce welds in plate and/or structural components covering three plate welding positions which must include Vertical (either upward or downward progression) and overhead.
- Produce plate welds in 3 main joint configurations (Single or Double Sided Butt, Single or Double Sided T‐Butt & Fillet)
- Work safely at all times, comply with health, safety and environmental legislation, regulations and organisational requirements.
- Can obtain, check and use appropriate documentation (such as job instructions, drawings, quality control documentation).
- Plan and prepare welding activities before commencing the work.
- Obtain, position and assemble welding equipment and associated safety protection needed for activity.
- Prepare, check and protect materials and work areas ready for welding.
- Inspect assembly to be welded and undertake remedial work to comply with specification, or implement quality steps if rejected.
- Receive, inspect, condition and maintain consumables.
- Set, test and monitor key welding parameters as detailed within the Welding Procedure Specification.
- Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
- Use manual processes and equipment to remove material (powered and non‐powered).
- Achieves a quality of work to meet international standards e.g. ISO5817, ISO9606, ASME IX, AWS D1.1 for dimensional, surface inspection (e.g. Visual, Magnetic Particle, Dye Penetrant) and volumetric inspection (e.g. Radiography, Ultrasonic inspection).
- Complete progressive and final checks on the weld prior to release for formal inspection and report into the production control system at the appropriate stages of the work activity.
- Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
- Produce welds in plate and/or structural components using two welding processes from TIG, PAW, MMA, MIG/MAG, FCAW.
- Produce welds in plate and/or structural components using two materials from Carbon Steel, Low Alloy Steel, High Alloy Ferritic/Martensitic Steel, Austenitic Stainless Steel, Nickel & Nickel Alloys, Aluminium & Aluminium alloys, Titanium & Titanium Alloys, Copper & Copper Alloys.
- Produce welds in plate and/or structural components covering three plate welding positions which must include Vertical (either upward or downward progression) and overhead.
- Produce plate welds in 3 main joint configurations (Single or Double Sided Butt, Single or Double Sided T‐Butt & Fillet)
Training schedule
Training will take place both on-site at GTR Welding and weekly day release at the Rochdale Training.
Requirements
Essential qualifications
GCSE in:
- English (grade 4)
- Maths (grade 4)
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Communication skills
- Organisation skills
- Team working
- Initiative
Other requirements
- A positive approach to learning and gaining new skills through teamwork and training opportunities
- Good communication skills
- Experience is desirable, but not essential
- Good organisational and planning skills
- Punctuality
- Reliability
- Trustworthiness
- Able to work in small teams, and in some cases on their own
- A good work ethic with personality is essential
About this employer
GTR Welding Services Limited has been running for 24 years, and works across the country, offering their services to multiple industries.
After this apprenticeship
Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).
Progression is offered to the correct candidate.
Ask a question
The contact for this apprenticeship is:
ROCHDALE TRAINING ASSOCIATION LIMITED
Adam Bhatti
abhatti@rochdaletraining.co.uk
01706 631 417
The reference code for this apprenticeship is VAC2000064954.
Apply now
Closes in 28 days (Friday 18 December 2026 at 11:59pm)