Heating, Plumbing and Renewable Energy Apprentice
MAP Technical sw Ltd
Paulton (BS39 7SU)
Closes in 9 days (Friday 4 September 2026)
Posted on 26 August 2026
Contents
Summary
We are looking for a motivated apprentice to join our team and develop practical skills in plumbing, heating and renewable energy. You will work alongside experienced engineers, gaining hands on experience with heating systems, heat pumps, underfloor heating and other renewable technologies, while working towards your apprenticeship qualification.
- Wage
-
£16,640 for your first year, then could increase depending on your age
National Minimum Wage rate for apprentices
- Training course
- Plumbing and domestic heating technician (level 3)
- Hours
-
Monday - Friday, 08.00 - 16.30.
40 hours a week
- Start date
-
Thursday 10 September 2026
- Duration
-
1 year
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
As an apprentice, you will work alongside our experienced team and gain hands-on experience across a range of projects. Your role will include:
- Assisting with the installation, servicing and maintenance of heating and renewable systems.
- Learning to install and work with heat pumps, underfloor heating systems.
- Carrying out practical plumbing and heating tasks on domestic and commercial projects.
- Following health and safety procedures and learning to work to a high professional standard.
- Developing your technical knowledge and practical skills through on-the-job training and your studies
Where you'll work
Map Technical S W Ltd Unit 66
Old Mills Industrial Estate, Old Mills, Paulton
Paulton
BS39 7SU
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
BATH COLLEGE
Training course
Plumbing and domestic heating technician (level 3)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
- Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
- Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
- Plan tasks within plumbing and domestic heating systems industry.
- Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
- Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
- Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
- Decommission plumbing and domestic heating systems.
- Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
- Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.
- Carry out and apply the common installation processes and techniques used in the installation and maintenance of natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input) in the workplace.
- Install, purge, test, commission and handover low pressure natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input).
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
- Decommission (including disconnection and dismantling) low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
- Plan, size and select low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
- Carry out and apply the common processes and techniques used in the installation of air source heat pump (non-refrigerant circuits) systems.
- Carry out and apply the common processes and techniques used in the installation of solar thermal systems.
- Test, commission and handover air source heat pump (non-refrigerant circuits) systems.
- Test, commission and handover solar thermal systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on air source heat pump (non-refrigerant circuits) systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on solar thermal systems.
- Decommission (including disconnection and dismantling) air source heat pump (non-refrigerant circuits) systems.
- Decommission (including disconnection and dismantling) solar thermal systems.
- Plan, size and select air source heat pump (non-refrigerant circuits) systems.
- Plan, size and select solar thermal systems.
- Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing pipework.
- Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing systems and appliances (cold water systems, hot water systems, sanitary appliances and pipework systems and rainwater systems).
- Test, commission and handover plumbing pipework (above 28mm) and non-domestic plumbing systems and appliances in the workplace. (cold water systems and sanitary appliances and pipework systems).
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on plumbing (above 28mm) and non-domestic plumbing systems and appliances.
- Decommission (including disconnection and dismantling) plumbing (above 28mm) and non-domestic plumbing systems and appliances.
- Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
- Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
- Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
- Plan tasks within plumbing and domestic heating systems industry.
- Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
- Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
- Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
- Decommission plumbing and domestic heating systems.
- Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
- Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.
Training schedule
Training will be provided one day per week, term time only, at Somer Valley Campus in Radstock.
Requirements
Essential qualifications
GCSE in:
- English (grade 4)
- Maths (grade 4)
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Attention to detail
- Reliable and punctual
- Safety conscious
Other requirements
The Apprenticeship involves working both indoors and outdoors in all weather conditions. It also involves being hands on with lifting materials and clearing up the site each day.
About this employer
MAP Technical is a local growing company specialising in plumbing, heating and renewable energy solutions. We install and maintain heating systems, alongside renewable technologies such as air source and ground source heat pumps, underfloor heating and solar PV.
After this apprenticeship
Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).
On successful completion of the apprenticeship, there may be the opportunity to continue working within the business.
Ask a question
The contact for this apprenticeship is:
BATH COLLEGE
Laura Joy
laura.joy@bathcollege.ac.uk
01225328752
The reference code for this apprenticeship is VAC2000049915.
Apply now
Closes in 9 days (Friday 4 September 2026)
After signing in, you’ll apply for this apprenticeship on the company's website.