Apprenticeship

WH SCOTT LIFTING LTD

Wickwar Gloucestershire (GL12 8JB)

Closes in 18 days (Thursday 10 September 2026 at 11:59pm)

Posted on 20 August 2026

Print

Contents

Summary

Engineering Maintenance Technicians work in a wide range of industries that use plant, machinery, equipment, systems, and fixtures. This includes energy, leisure and entertainment, manufacturing, processing, and utilities companies. Working environments vary across these industries. 

Dual discipline course. 

Wage

£16,640 to £26,436.80, depending on your age

National Minimum Wage

Minimum wage rates (opens in new tab)

Hourly rate is £8.00 for under 18

Training course
Engineering maintenance technician - dual discipline (level 3)
Hours
Monday to Friday 8:30 am to 4 pm

40 hours a week

Start date

Monday 21 September 2026

Duration

4 years

Positions available

2

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

  • Electrical and control and instrumentation technician
  • Electrical and mechanical maintenance technician

Engineering Maintenance Technicians are responsible for maintaining plant and equipment to optimise operation. This involves carrying out planned and preventative maintenance to prevent issues occurring and reactive maintenance when problems occur, for example, responding to breakdowns.

Technicians must prepare for and accept jobs, complete work safely to required standards, close the job, and complete accurate work records. They also contribute to continuous improvement activities. Depending on the task, work may be completed as part of a team or independently.

Where you'll work

Head Office
Arnolds Field Estate
Wickwar Gloucestershire
GL12 8JB

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

CITY OF BRISTOL COLLEGE

Training course

Engineering maintenance technician - dual discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.
  • Electrical and control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and control and instrumentation. Select, check, and use electrical maintenance tools, measurement, and test equipment. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
  • Electrical and control and instrumentation. Use electrical diagnostic equipment and apply fault finding and rectification techniques. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and control and instrumentation. Apply problem solving and critical reasoning techniques.
  • Electrical and control and instrumentation. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and control and instrumentation. Remove and replace electrical parts.
  • Electrical and control and instrumentation. Prepare and terminate electrical cables.
  • Electrical and control and instrumentation. Set up and adjust electrical aspects of plant.
  • Electrical and control and instrumentation. Clean parts. For example, removal of dust and debris.
  • Electrical and control and instrumentation. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and control and instrumentation. Conduct functional testing.
  • Electrical and control and instrumentation. Inspect and test control and instrumentation systems.
  • Electrical and control and instrumentation. Check calibration and make adjustments.
  • Electrical and control and instrumentation. Check loop function.
  • Electrical and control and instrumentation. Set up and adjust control and instrumentation systems.
  • Electrical and control and instrumentation. Remove and replace instruments and sensors.
  • Electrical and control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
  • Electrical and mechanical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and mechanical. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and mechanical. Select, check, and use electrical and mechanical maintenance tools, measurement, and test equipment.
  • Electrical and mechanical. Use electrical and mechanical diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and mechanical. Apply problem solving and critical reasoning techniques.
  • Electrical and mechanical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and mechanical. Remove and replace electrical parts.
  • Electrical and mechanical. Prepare and terminate electrical cables.
  • Electrical and mechanical. Set up, align, and adjust electrical aspects of plant.
  • Electrical and mechanical. Clean parts. For example, removal of dust and debris.
  • Electrical and mechanical. Conduct functional testing.
  • Electrical and mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
  • Electrical and mechanical. Remove and replace mechanical parts.
  • Electrical and mechanical. Examine mechanical parts for defects. For example, pump seals.
  • Electrical and mechanical. Set up, align, and adjust mechanical aspects of plant.
  • Electrical and mechanical. Lubricate mechanical assemblies.
  • Electrical and mechanical. Apply bench fitting techniques.
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.

Training schedule

Engineering Maintenance Technician - dual discipline - Level 3.

City of Bristol College and WH Scott Bristol branch, based in Wickwar. It is 4 days at work and one day per on college. 

Requirements

Essential qualifications

GCSE in:

English and Maths (grade 2)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • Attention to detail
  • Logical
  • Team working

About this employer

WH Scott Group one stop shop for lifting equipment, load securing, hydraulics, height safety equipment and associated testing, installation, repair and maintenance services.
WH Scott Group is  market leaders in the design and manufacture of highly-engineered lifting and handling solutions used
in lifting, rigging and material handling applications. We a also leading provider of engineering inspection and non-destructive testing.

https://whscottlifting.com/about-us/ (opens in new tab)

After this apprenticeship

Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).

Many Level 3 Apprentices progress to higher technical courses (HNC or degree), or to higher-level apprenticeships.

Others secure positions such as installation and commissioning technicians.

Ask a question

The contact for this apprenticeship is:

WH SCOTT LIFTING LTD

Vesna Terze

vesna@whscottlifting.com

+448726501017

The reference code for this apprenticeship is VAC2000049148.

Apply now

Closes in 18 days (Thursday 10 September 2026 at 11:59pm)