Apprentice Banker Stonemason

RJH ( YORKSHIRE ) LTD

SHEFFIELD (S36 9QJ)

Closes on Monday 14 September 2026

Posted on 11 August 2026

Print

Contents

Summary

Working alongside our existing stonemason you will learn to produce a wide range of items from raw stone block. This will include building stone, fireplaces, windows and sills and individually commissioned bespoke stone pieces.

Wage

£16,640 to £26,436.80, depending on your age

National Minimum Wage

Minimum wage rates (opens in new tab)

National minimum wage for the apprentice's age will be paid.

Training course
Stonemason (level 2)
Hours
Age 16-17 = 40 hours - 08.30am to 5.00pm Monday to Friday. Age 18 or over = 45 hours - 07.30 to 5.00pm Monday to Friday. Plus, optional Saturday morning work.

40 hours a week

Start date

Thursday 1 October 2026

Duration

1 year 10 months

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

The tasks will be as follows:

  • To understand and confirm masonry requirements against drawings and orders
  • To make moulds or templates or use pre-existing moulds to produce stone masonry pieces such as windows and sills
  • The use of hand tools and power tools to produce the required products
  • Working to precise details and high-quality specifications
  • Dressing of stone to the required finish
  • Some conservation and restoration of heritage stone items
  • Occasional installation of the finished product on site
  • Adherence to all Health & Safety requirements on site
  • Working as part of a small team to deliver orders on time and to the highest quality

Where you'll work

HILLSIDE
THURLSTONE
SHEFFIELD
S36 9QJ

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

YORK COLLEGE

Training course

Stonemason (level 2)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Core - Carry out safe stonemasonry working practices, comply with health, safety and welfare legislation, conduct risk assessments; Report any workplace hazards, incidents, near misses, accidents or emergencies.
  • Core - Apply all safeguards and complete pre-use checks when using tools.
  • Core - Select and use the appropriate tools, components and equipment; Repair and maintain tools, components and equipment.
  • Core - Plan the sequence of stonemasonry work required; Ensure work is completed safely within the allocated time and budget and report any situations which affect the work schedule.
  • Core - Select the required type and quantity of materials, move, handle and store safely.
  • Core - Set out and work stone to receive enrichments such as flat, moulded, straight and curved, internal and external mitres, stop ends and returned ends.
  • Banker Stonemason - Produce enrichments for example repeated enrichment (egg and dart, or tongue and dart, or bead and reel), v-cut carving, high relief carving or low relief carving.
  • Core - Position and secure the stones in the required locations and identify bedding planes to suit the use of the stone component; When securing stone, ensure correct measurement, marking out, shape, level, fit, finish and position.
  • Core - Comply with specific organisational and manufacturer's quality standards as required by the job specification and report any variation in quality, implementing agreed corrective actions where required.
  • Core - Clean and tidy work area when work is finished; Store, transport and dispose of masonry waste; Reduce, reuse or recycle waste produced; Use work practices and resources which will contribute to zero/low carbon outcomes
  • Core - Communicate with colleagues/customers; use industry terminology.
  • Core - Ensure the products are the right size and fit to meet the design specification.
  • Banker Stonemason - Measure, mark out, cut and finish standard templates or moulds.
  • Banker Stonemason - Produce true and square natural stone components.
  • Banker Stonemason - Prepare, conserve, repair or refurbish existing stone masonry by replicating, removing, replacing or stabilising the existing structure; prepare mortars, joint finishing and applying surface finishes, all of which match existing masonry as close as possible or are in line with the conservation plan.
  • Banker Stonemason - Produce basic section bed and face moulds for natural stone components.
  • Banker Stonemason - Produce bespoke natural stone components: for example shaped curved on plan, tracery, ramp and twist, spheres, entablature, ionic components or finials
  • Interior Stone Fixer - Check and prepare existing internal surfaces to receive stonework; apply pre-sealants, water and solvent based final sealants and protection.
  • Interior Stone Fixer - Mix and apply mortar and sand renders, adhesives and grouts, substrates and screeds (including self-levelling); install thermal, movement and expansion joints.
  • Interior Stone Fixer - Form angles, reveals, cills and soffits, floor drainage and outlets; install membranes and lay natural stone flooring to regular and irregular surfaces, fix trims and movement joints including treads, risers and landings; fix internal stonework to vertical, horizontal and inclined wall and floor surfaces; fit internal treads, risers and work surfaces.
  • Interior Stone Fixer/Exterior Stone Fixer - Grout, seal, clean, secure and finish stonework; bed, joint and point natural stone flooring, match finishes where possible and fix accessories (e.g. wire restraint fixings, channels) to wall slabs.
  • Exterior Stone Fixer - Prepare backgrounds for load bearing support and restraint systems, insulation (e.g. membranes and fire stops), cavity trays and damp proof membranes (DPM); apply waterproof sealants to background surfaces; install and remove mechanical fixings, shims and spacers.
  • Exterior Stone Fixer - Install and fix external cladding with load-bearing support and restraint systems; repair or replace defective stone cladding as required; identify and mix mortars, resins and adhesives; identify and fix suitable reinforcements and fixings; form suitable joint finishes which are sympathetic to existing building.
  • Memorial Stonemason/Stone Facade Preservation - Prepare and mix lime mortars, hydraulic and non-hydraulic limes, lime mortars with additives or lime mortars with fibres (natural or synthetic) as appropriate.
  • Memorial Stonemason - Install and secure memorial stones, ensuring that ground and surface conditions are checked and recorded, area is excavated and foundations are laid.
  • Memorial Stonemason - Mark out, position, inscribe, ornament and finish details on memorial stones; produce and use templates for sandblasting; safely use sandblasting equipment to produce details, lettering and ornamentation; finish memorial work using gilding and hand polishing.
  • Stone Facade Preservation - Dismantle facade surfaces to allow for safe and effective cleaning and preservation; brush, use jets and sprays to clean facades; effectively clean flat, textured & moulded stone and art stone using chemical and non-chemical methods; effectively clean non-masonry surfaces e.g. burnt clay, cast stone, metal, plastic, plastic-coated materials, wood, glass by chemical and non-chemical methods.
  • Stone Facade Preservation – Measure, mark out, cut, fit, mix, spread, dress, descale, point, position and secure when restoring façade surfaces; Restore in-situ units, façades and joints on flat, textured and moulded natural stone and on burnt clay, art stone and concrete.
  • Heritage Stonemason - Collect records using photographic, written or digital collection methods prior to any work being carried out.
  • Heritage Stonemason - Drill and cut stone backgrounds to receive fixings sympathetic to the existing condition of heritage masonry; safely form openings which conform to the requirements for heritage planning and buildings regulations.
  • Heritage Stonemason - Apply conservation techniques to maintain heritage and archaeological accuracy, using heritage techniques and procedures where appropriate, with minimum intervention and minimum reversible alterations.
  • Heritage Stonemason - Match new masonry components with existing structures and incorporate pre-prepared conservation masonry components; Finish by applying hand cut ornamentation or lettering where required.
  • Core - Carry out safe stonemasonry working practices, comply with health, safety and welfare legislation, conduct risk assessments; Report any workplace hazards, incidents, near misses, accidents or emergencies.
  • Core - Apply all safeguards and complete pre-use checks when using tools.
  • Core - Select and use the appropriate tools, components and equipment; Repair and maintain tools, components and equipment.
  • Core - Plan the sequence of stonemasonry work required; Ensure work is completed safely within the allocated time and budget and report any situations which affect the work schedule.
  • Core - Select the required type and quantity of materials, move, handle and store safely.
  • Core - Set out and work stone to receive enrichments such as flat, moulded, straight and curved, internal and external mitres, stop ends and returned ends.
  • Banker Stonemason - Produce enrichments for example repeated enrichment (egg and dart, or tongue and dart, or bead and reel), v-cut carving, high relief carving or low relief carving.
  • Core - Position and secure the stones in the required locations and identify bedding planes to suit the use of the stone component; When securing stone, ensure correct measurement, marking out, shape, level, fit, finish and position.
  • Core - Comply with specific organisational and manufacturer's quality standards as required by the job specification and report any variation in quality, implementing agreed corrective actions where required.
  • Core - Clean and tidy work area when work is finished; Store, transport and dispose of masonry waste; Reduce, reuse or recycle waste produced; Use work practices and resources which will contribute to zero/low carbon outcomes
  • Core - Communicate with colleagues/customers; use industry terminology.
  • Core - Ensure the products are the right size and fit to meet the design specification.

Training schedule

Stonemason Level 2.

Stonemason apprentices attend college on block release which is for 2-weeks per term approximately and work for their employer for the rest of the time. If required Functional Skills are delivered as a separate block release.

More training information

Continual assessment will take place throughout the duration of the apprenticeship. If required, the Functional Skills are assessed through on-line tests.

The End-Point Assessment (EPA) will comprise of:

  • Practical Skills Observation with questioning in college
  • 60-minute interview based on your portfolio of evidence

Requirements

Essential qualifications

GCSE in:

  • English (grade 4)
  • Maths (grade 4)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Attention to detail
  • Organisation skills
  • Problem solving skills
  • Number skills
  • Analytical skills
  • Logical
  • Team working
  • Creative
  • Initiative
  • Patience
  • Physical fitness
  • Practical

Other requirements

The workplace is located under an open shed.  However, the job should be considered as working outdoors as you will be working at outdoor temperatures.

Due to the rural location and lack of public transport you must have your own means to get to the work location.

About this employer

The business was established in 2009 and employs 7 people.

A working quarry dealing with the extraction of sandstone block and processing this onsite to produce building and masonry products for housing, external uses, heritage items and architectural design pieces.

 

https://hillsidequarry.co.uk/ (opens in new tab)

Company benefits

20 days annual leave plus 8 bank holiday days. (Total 28).

 

After this apprenticeship

Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).

Permanent, full-time role at the end of the apprenticeship.

Ask a question

The contact for this apprenticeship is:

YORK COLLEGE

Liz Hunt

huntelizabeth3060@gmail.com

07901 812231

The reference code for this apprenticeship is VAC2000047650.

Apply now

Closes on Monday 14 September 2026