Engineering Maintenance Technician Apprentice (Level 3)

Shenton Group

ANDOVER (SP10 5LH)

Closes in 31 days (Sunday 30 August 2026 at 11:59pm)

Posted on 28 July 2026

Print

Contents

Summary

Launch your engineering career with Shenton Group. Develop practical electrical and mechanical skills maintaining critical power systems, including diesel generators. Gain hands-on experience alongside experienced engineers while completing a Level 3 Engineering Maintenance Technician apprenticeship.

Wage

£22,568 a year

Minimum wage rates (opens in new tab)

£22,568.00 for apprentices aged 17–20

£26,436.80 for apprentices aged 21+

Training course
Engineering maintenance technician - dual discipline (level 3)
Hours
Monday to Thursday, 9am to 5pm Friday, 9am to 4.30pm

39 hours 30 minutes a week

Start date

Monday 21 September 2026

Duration

3 years

Positions available

2

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

  • Support the maintenance, servicing and repair of diesel generators and associated equipment
  • Assist with planned preventative maintenance (PPM) and reactive breakdown repairs
  • Learn to diagnose faults and support repairs on electrical and mechanical systems
  • Work with engines, alternators, control panels, fuel systems, cooling systems and associated components
  • Complete job records and service reports using company systems
  • Support testing, inspection and commissioning activities
  • Follow health and safety procedures and site requirements at all times
  • Work alongside experienced engineers both at Shenton Group facilities and customer sites

Where you'll work

SHENTON HOUSE
WALWORTH ROAD
ANDOVER
SP10 5LH

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

PROFESSIONAL DEVELOPMENT AND TRAINING LTD

Training course

Engineering maintenance technician - dual discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.
  • Electrical and control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and control and instrumentation. Select, check, and use electrical maintenance tools, measurement, and test equipment. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
  • Electrical and control and instrumentation. Use electrical diagnostic equipment and apply fault finding and rectification techniques. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and control and instrumentation. Apply problem solving and critical reasoning techniques.
  • Electrical and control and instrumentation. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and control and instrumentation. Remove and replace electrical parts.
  • Electrical and control and instrumentation. Prepare and terminate electrical cables.
  • Electrical and control and instrumentation. Set up and adjust electrical aspects of plant.
  • Electrical and control and instrumentation. Clean parts. For example, removal of dust and debris.
  • Electrical and control and instrumentation. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and control and instrumentation. Conduct functional testing.
  • Electrical and control and instrumentation. Inspect and test control and instrumentation systems.
  • Electrical and control and instrumentation. Check calibration and make adjustments.
  • Electrical and control and instrumentation. Check loop function.
  • Electrical and control and instrumentation. Set up and adjust control and instrumentation systems.
  • Electrical and control and instrumentation. Remove and replace instruments and sensors.
  • Electrical and control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
  • Electrical and mechanical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and mechanical. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and mechanical. Select, check, and use electrical and mechanical maintenance tools, measurement, and test equipment.
  • Electrical and mechanical. Use electrical and mechanical diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and mechanical. Apply problem solving and critical reasoning techniques.
  • Electrical and mechanical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and mechanical. Remove and replace electrical parts.
  • Electrical and mechanical. Prepare and terminate electrical cables.
  • Electrical and mechanical. Set up, align, and adjust electrical aspects of plant.
  • Electrical and mechanical. Clean parts. For example, removal of dust and debris.
  • Electrical and mechanical. Conduct functional testing.
  • Electrical and mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
  • Electrical and mechanical. Remove and replace mechanical parts.
  • Electrical and mechanical. Examine mechanical parts for defects. For example, pump seals.
  • Electrical and mechanical. Set up, align, and adjust mechanical aspects of plant.
  • Electrical and mechanical. Lubricate mechanical assemblies.
  • Electrical and mechanical. Apply bench fitting techniques.
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.

Training schedule

Training will primarily take place at Shenton House, Andover, where the apprentice will work alongside experienced engineers maintaining and servicing critical power systems.

In addition, PDT will deliver apprenticeship training at our offices approximately once per month. The apprentice will also complete off-the-job learning and practical workplace training as part of the Level 3 Engineering Maintenance Technician Apprenticeship

Requirements

Desirable qualifications

GCSE in:

  • English (grade 4/C)
  • Maths (grade 4/C)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • Attention to detail
  • Organisation skills
  • Customer care skills
  • Problem solving skills
  • Analytical skills
  • Logical
  • Team working
  • Initiative
  • Physical fitness

Other requirements

 A full UK driving licence is required due to the site-based nature of this role and travel to client locations.

About this employer

Shenton Group is the UK's leading technical experts in standby power and energy solutions. For over 40 years, we've helped keep businesses running by supplying, installing, hiring and maintaining critical power systems.

With a team of around 100 employees, we're proud of our family values, high standards and commitment to developing the next generation of engineering talent through apprenticeships and long-term career opportunities.

https://www.shentongroup.co.uk/ (opens in new tab)

Company benefits

  • Company Bonus Scheme
  • 25 days leave, plus bank holidays
  • Enhanced pension contribution
  • Cashplan health benefit

Disability Confident

Disability Confident

A fair proportion of interviews for this apprenticeship will be offered to applicants with a disability or long-term health condition. This includes non-visible disabilities and conditions.

You can choose to be considered for an interview under the Disability Confident scheme. You’ll need to meet the essential requirements to be considered for an interview.

After this apprenticeship

Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).

Upon successful completion, the apprentice may progress into a Maintenance Engineer role within Shenton Group. The skills and qualifications gained can also support future careers as a Field Service Engineer, Maintenance Engineer, Electrical Engineer, Mechanical Engineer or Specialist Power Systems Engineer across the engineering and energy sectors.

Ask a question

The contact for this apprenticeship is:

Shenton Group

Sam Henbest

sam.henbest@shentongroup.co.uk

The reference code for this apprenticeship is VAC2000044775.

Apply now

Closes in 31 days (Sunday 30 August 2026 at 11:59pm)