Maintenance and Operations Engineering Technician Apprentice

GIVAUDAN UK LIMITED

Kent (TN24 0LT)

Closes on Thursday 20 August 2026

Posted on 12 June 2026

Print

Contents

Summary

Maintenance and Operations Engineering Technician Apprentice working for a global leader in fragrance & beauty and taste & wellbeing.

Wage

£15,600 for your first year, then could increase depending on your age

National Minimum Wage rate for apprentices

Minimum wage rates (opens in new tab)

Training course
Engineering maintenance technician - dual discipline (level 3)
Hours
Monday - Friday. Shifts be confirmed.

37 hours 30 minutes a week

Start date

Tuesday 1 September 2026

Duration

4 years

Positions available

2

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

  • Perform routine repairs, preventive maintenance and installation of equipment under close supervision and in a timely manner to minimise disruptions to site operations
  • Perform preventative maintenance and troubleshooting and/or repairs of production and facility equipment, proactively identifying and resolving recurring maintenance issues in the assigned area of activity
  • Conduct electrical or mechanical installation, repair, and troubleshooting of motors, instrumentation and/or controls
  • Identify deviations and document/communicate them in compliance with Standard Operating Procedures
  • Work in accordance with all relevant requirements, including, but not limited to, ATEX, GMP, AIB, OSHA, HACCP, FDA, USDA and internal safety guidelines
  • Maintains a high level of housekeeping, sanitation, food safety and safety which meets the company’s standards and guidelines
  • Perform administrative duties, including but not limited to creating and closing work requests using Maintenance management system (SAP)
  • May perform other tasks as assigned

Where you'll work

Finance Building
Kennington Road
Ashford
Kent
TN24 0LT

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

EKC GROUP

Training course

Engineering maintenance technician - dual discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.
  • Electrical and control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and control and instrumentation. Select, check, and use electrical maintenance tools, measurement, and test equipment. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
  • Electrical and control and instrumentation. Use electrical diagnostic equipment and apply fault finding and rectification techniques. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and control and instrumentation. Apply problem solving and critical reasoning techniques.
  • Electrical and control and instrumentation. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and control and instrumentation. Remove and replace electrical parts.
  • Electrical and control and instrumentation. Prepare and terminate electrical cables.
  • Electrical and control and instrumentation. Set up and adjust electrical aspects of plant.
  • Electrical and control and instrumentation. Clean parts. For example, removal of dust and debris.
  • Electrical and control and instrumentation. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and control and instrumentation. Conduct functional testing.
  • Electrical and control and instrumentation. Inspect and test control and instrumentation systems.
  • Electrical and control and instrumentation. Check calibration and make adjustments.
  • Electrical and control and instrumentation. Check loop function.
  • Electrical and control and instrumentation. Set up and adjust control and instrumentation systems.
  • Electrical and control and instrumentation. Remove and replace instruments and sensors.
  • Electrical and control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
  • Electrical and mechanical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and mechanical. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and mechanical. Select, check, and use electrical and mechanical maintenance tools, measurement, and test equipment.
  • Electrical and mechanical. Use electrical and mechanical diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and mechanical. Apply problem solving and critical reasoning techniques.
  • Electrical and mechanical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and mechanical. Remove and replace electrical parts.
  • Electrical and mechanical. Prepare and terminate electrical cables.
  • Electrical and mechanical. Set up, align, and adjust electrical aspects of plant.
  • Electrical and mechanical. Clean parts. For example, removal of dust and debris.
  • Electrical and mechanical. Conduct functional testing.
  • Electrical and mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
  • Electrical and mechanical. Remove and replace mechanical parts.
  • Electrical and mechanical. Examine mechanical parts for defects. For example, pump seals.
  • Electrical and mechanical. Set up, align, and adjust mechanical aspects of plant.
  • Electrical and mechanical. Lubricate mechanical assemblies.
  • Electrical and mechanical. Apply bench fitting techniques.
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.

Training schedule

  • Engineering Maintenance Dual Discipline Level 3
  • 1-day a week at college and 4-days in the workplace

Requirements

Desirable qualifications

GCSE in:

Maths and English (grade 4/C/Level 2 functional skills)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Organisation skills
  • Problem solving skills
  • Administrative skills
  • Number skills
  • Logical
  • Team working
  • Patience

About this employer

With an expanded portfolio of products across flavours, taste, functional and nutritional solutions and a deep knowledge of the food ecosystem, Givaudan’s passion is to collaborate with customers and partners to develop game-changing innovations in food and beverages. The artistry of our perfumers encompasses a myriad of passionate scented stories for brands everywhere. Our collections of beauty innovations push industry limits by inspiring and empowering customers with tailored products to enhance their wellbeing.

https://www.givaudan.com/ (opens in new tab)

After this apprenticeship

Potential permanent vacancy at the end of the apprenticeship.

Ask a question

The contact for this apprenticeship is:

EKC GROUP

Dylan Warshow

dylan.warshow@ekcgroup.ac.uk

01227811315

The reference code for this apprenticeship is VAC2000036773.

Apply now

Closes on Thursday 20 August 2026