Machine Shop Apprentice
MELTOG LTD
LEEDS (LS12 1HE)
Closes on Monday 31 August 2026
Posted on 19 May 2026
Contents
Summary
As a result of continued growth and expansion, the company is seeking motivated apprentices to join us. Successful candidates will complete the relevant apprenticeship to gain the necessary qualifications and skills to fulfil the requirements of the job and will besupervised and guided by Meltog’s qualified personnel.
- Wage
-
£15,392 for your first year, then could increase depending on your age
National Minimum Wage rate for apprentices
- Training course
- Machining technician (level 3)
- Hours
-
Monday - Thursday, 8.00am - 4.30pm and Friday, 8.00am - 1.30pm
37 hours a week
- Start date
-
Monday 14 September 2026
- Duration
-
3 years 6 months
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
- Learning and understanding the importance of Health and Safety within the working environment
- To develop the skills and carry out duties from drawings, documentation and verbal instructions to a high degree of precision
- To maintain a logbook over the duration of the apprenticeship period, recording projects that have been undertaken and the skills learned
- To maintain and to ensure good general housekeeping of the workplace areas
Where you'll work
UNIT B
COPLEY HILL TRADING ESTATE
WHITEHALL ROAD
LEEDS
LS12 1HE
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
LUMINATE EDUCATION GROUP
Training course
Machining technician (level 3)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Comply with statutory health and safety regulations and procedures.
- Comply with environmental, ethical and sustainability regulations and procedures: safe disposal of waste, re-cycling or re-use of materials and efficient use of resources.
- Prepare and set up conventional or CNC machines.
- Operate and adjust conventional or CNC machines.
- Apply risk assessment and hazard identification processes and procedures in the work area.
- Monitor, obtain and check stock and supplies, and complete stock returns.
- Record information - paper based or electronic. For example, energy usage, job sheets, risk assessments, equipment service records, test results, handover documents and manufacturers' documentation, asset management records, work sheets, checklists, waste environmental records and any legal reporting requirements.
- Read and interpret information. For example, data and documentation used to produce machined components.
- Apply engineering, mathematical and scientific principles.
- Plan and organise own work and resources.
- Follow and apply inspection, quality assurance procedures and processes.
- Select machining process.
- Select and setup tooling and work holding devices.
- Set and adjust machine operating parameters. For example, setting feeds and speeds for roughing and finishing operations, loading, proving and validating programs when using a CNC machine tool.
- Apply machining operations and techniques to produce complex components with features. For example, parallel; stepped; angular diameters and faces; grooves; slots; recesses and undercuts; radii and chamfers; internal and external forms and profiles; reamed; bored; drilled and electro eroded holes; internal and external screw threads.
- Measure and check components.
- Select and check condition of tools and equipment. Identify issues, resolve and take action as needed.
- Identify and action issues in the manufacturing process.
- Apply fault-finding and diagnostic testing procedures to identify faults. Diagnose and resolve issues. Escalate issues.
- Maintain the work area and return any resources and consumables.
- Communicate with others verbally. For example, colleagues and stakeholders.
- Follow machine shut down, safe isolation, handover, start up or warm up procedures. Escalate issues.
- Apply continuous improvement techniques. Devise suggestions for improvement.
- Apply ethical principles.
- Apply team working principles.
- Comply with statutory health and safety regulations and procedures.
- Comply with environmental, ethical and sustainability regulations and procedures: safe disposal of waste, re-cycling or re-use of materials and efficient use of resources.
- Prepare and set up conventional or CNC machines.
- Operate and adjust conventional or CNC machines.
- Apply risk assessment and hazard identification processes and procedures in the work area.
- Monitor, obtain and check stock and supplies, and complete stock returns.
- Record information - paper based or electronic. For example, energy usage, job sheets, risk assessments, equipment service records, test results, handover documents and manufacturers' documentation, asset management records, work sheets, checklists, waste environmental records and any legal reporting requirements.
- Read and interpret information. For example, data and documentation used to produce machined components.
- Apply engineering, mathematical and scientific principles.
- Plan and organise own work and resources.
- Follow and apply inspection, quality assurance procedures and processes.
- Select machining process.
- Select and setup tooling and work holding devices.
- Set and adjust machine operating parameters. For example, setting feeds and speeds for roughing and finishing operations, loading, proving and validating programs when using a CNC machine tool.
- Apply machining operations and techniques to produce complex components with features. For example, parallel; stepped; angular diameters and faces; grooves; slots; recesses and undercuts; radii and chamfers; internal and external forms and profiles; reamed; bored; drilled and electro eroded holes; internal and external screw threads.
- Measure and check components.
- Select and check condition of tools and equipment. Identify issues, resolve and take action as needed.
- Identify and action issues in the manufacturing process.
- Apply fault-finding and diagnostic testing procedures to identify faults. Diagnose and resolve issues. Escalate issues.
- Maintain the work area and return any resources and consumables.
- Communicate with others verbally. For example, colleagues and stakeholders.
- Follow machine shut down, safe isolation, handover, start up or warm up procedures. Escalate issues.
- Apply continuous improvement techniques. Devise suggestions for improvement.
- Apply ethical principles.
- Apply team working principles.
Training schedule
- Training will take place at Printworks Campus, Leeds
- You will come to college one day per week
Requirements
Essential qualifications
GCSE in:
- English (grade 4)
- Maths (grade 4)
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Communication skills
- IT skills
- Attention to detail
- Organisation skills
- Customer care skills
- Problem solving skills
- Administrative skills
- Number skills
- Analytical skills
- Logical
- Team working
- Creative
- Initiative
About this employer
Meltog Ltd is an SME Engineering company based in Leeds that designs, manufactures, assembles and integrates complex electro-mechanical machinery for the recycling, metal packaging and filtration industries. The company is headquartered in Leeds in the UK and supplies its products worldwide. From this site, Meltog offers not only new machinery but also expertise and advice, spare parts and a full range of aftermarket services. As a technology business, the company has invested extensively in its engineering systems, utilising a state-of-the-art 3D CAD system for its design processes and CNC machine tools for manufacturing.
After this apprenticeship
- Full time position
Ask a question
The contact for this apprenticeship is:
LUMINATE EDUCATION GROUP
apprenticeships@leedscitycollege.ac.uk
The reference code for this apprenticeship is VAC2000031009.
Apply now
Closes on Monday 31 August 2026