Apprentice Plumber - Bradford
IAN WILLIAMS LIMITED
Bradford (BD4 7AQ)
Closes in 31 days (Friday 29 May 2026)
Posted on 27 April 2026
Contents
Summary
As an Apprentice at Ian Williams, you’ll learn on the job, gaining hands‑on experience while studying at college. You’ll be supported by experienced tradespeople, including your own dedicated mentor, and work towards mastering your chosen trade.
- Wage
-
£16,224 a year
- Training course
- Plumbing and domestic heating technician (level 3)
- Hours
-
Monday to Thursday – 8 hours per day, Friday – 7 hours per day. (Monday - Thursday, 08:00 - 16:30, Friday, 08:00 - 15:30.
39 hours a week
- Start date
-
Monday 17 August 2026
- Duration
-
2 years
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
Your work will vary from contract to contract, but here’s an idea of what you’ll be up to:
- Working on projects predominantly in social housing
- Covering areas including (but not limited to): Bradford
- Locations may vary depending on contracts, and you may occasionally travel further afield. We will help with transport where possible
- Depending on your home address, we will usually arrange a convenient collection point for you and a member of our team. This will be discussed during your interview
- Learning about a range of systems
- Bathroom Installations
- Working with hot and cold water systems
- Emergency repairs
- Working on domestic and commercial sites (although primarily domestic)
- Develop a neat and methodical approach to your work
You’ll also:
- Attend college to understand the “how and why” of your trade (usually 1 day a week)
- Build an awesome portfolio of evidence for your End Point Assessment (EPA)
- Be a valued team member and contribute to our overall success
Where you'll work
Windsor Street
Bradford
BD4 7AQ
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
LEEDS COLLEGE OF BUILDING
Training course
Plumbing and domestic heating technician (level 3)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
- Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
- Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
- Plan tasks within plumbing and domestic heating systems industry.
- Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
- Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
- Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
- Decommission plumbing and domestic heating systems.
- Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
- Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.
- Carry out and apply the common installation processes and techniques used in the installation and maintenance of natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input) in the workplace.
- Install, purge, test, commission and handover low pressure natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input).
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
- Decommission (including disconnection and dismantling) low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
- Plan, size and select low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
- Carry out and apply the common processes and techniques used in the installation of air source heat pump (non-refrigerant circuits) systems.
- Carry out and apply the common processes and techniques used in the installation of solar thermal systems.
- Test, commission and handover air source heat pump (non-refrigerant circuits) systems.
- Test, commission and handover solar thermal systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on air source heat pump (non-refrigerant circuits) systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on solar thermal systems.
- Decommission (including disconnection and dismantling) air source heat pump (non-refrigerant circuits) systems.
- Decommission (including disconnection and dismantling) solar thermal systems.
- Plan, size and select air source heat pump (non-refrigerant circuits) systems.
- Plan, size and select solar thermal systems.
- Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing pipework.
- Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing systems and appliances (cold water systems, hot water systems, sanitary appliances and pipework systems and rainwater systems).
- Test, commission and handover plumbing pipework (above 28mm) and non-domestic plumbing systems and appliances in the workplace. (cold water systems and sanitary appliances and pipework systems).
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on plumbing (above 28mm) and non-domestic plumbing systems and appliances.
- Decommission (including disconnection and dismantling) plumbing (above 28mm) and non-domestic plumbing systems and appliances.
- Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
- Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
- Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
- Plan tasks within plumbing and domestic heating systems industry.
- Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
- Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
- Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
- Decommission plumbing and domestic heating systems.
- Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
- Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.
Training schedule
Requirements
Essential qualifications
GCSE in:
- English (grade 4/C)
- Maths (grade 4/C)
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Communication skills
- Attention to detail
- Customer care skills
- Team working
- Creative
Other requirements
- Passing a Disclosure and Barring Service (DBS) check
About this employer
With expertise in social housing, education, and commercial sectors, Ian Williams is a leader in delivering innovative planned and responsive services to the built environment. Our responsive repairs and maintenance team undertakes 300,000 visits a year, fixing faults in homes and workplaces.
We owe our success to our people and believe that our success will continue if we offer you a great place to work and the opportunity to develop your career. We’re proud to have been awarded We Invest in People Gold accreditation.
https://www.ianwilliams.co.uk/about-us/academy/ (opens in new tab)
Company benefits
- Permanent contract guaranteeing you a job once you are qualified
- 23 days holiday per year plus bank holidays
- Personal Protective Equipment and Uniform
- We provide you with Toolkit to get you started
After this apprenticeship
- A permanent contract guaranteeing you a job once you are qualified
- Options to explore Supervisory/Foreperson roles for those interested in progression
Ask a question
The contact for this apprenticeship is:
LEEDS COLLEGE OF BUILDING
apprenticeships@ianwilliams.co.uk
The reference code for this apprenticeship is VAC2000028623.
Apply now
Closes in 31 days (Friday 29 May 2026)
After signing in, you’ll apply for this apprenticeship on the company's website.