Apprentice Plumber

BRP Plumbing

Leeds (LS20 9DH)

Closes in 6 days (Friday 24 April 2026 at 11:59pm)

Posted on 16 April 2026

Print

Contents

Summary

A close-knit company is looking to recruit a Plumbing Apprentice to join their growing team. Excellent opportunity for someone looking to build a career in the plumbing and heating industry. You’ll gain hands-on experience working alongside experienced engineers, with a focus on bathroom fitting, gas work, and general plumbing.

Wage

£15,600 for your first year, then could increase depending on your age

National Minimum Wage rate for apprentices

Check minimum wage rates (opens in new tab)

Training course
Plumbing and domestic heating technician (level 3)
Hours
8am start - Monday to Friday. Finish time to be confirmed.

37 hours 30 minutes a week

Start date

Tuesday 1 September 2026

Duration

4 years

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

  • Assisting with full bathroom installations
  • Supporting gas-related work (training towards Gas Safe qualification)
  • Carrying out general plumbing tasks, such as pipework, repairs, and maintenance
  • Installing toilets, sinks, showers, baths
  • Learning fault-finding and problem-solving techniques
  • Maintaining a clean, safe, and professional work environment

Where you'll work

36 Hillside Avenue
Guiseley
Leeds
LS20 9DH

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

BRADFORD COLLEGE

Training course

Plumbing and domestic heating technician (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
  • Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
  • Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
  • Plan tasks within plumbing and domestic heating systems industry.
  • Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
  • Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
  • Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
  • Decommission plumbing and domestic heating systems.
  • Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
  • Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
  • Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.
  • Carry out and apply the common installation processes and techniques used in the installation and maintenance of natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input) in the workplace.
  • Install, purge, test, commission and handover low pressure natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input).
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
  • Decommission (including disconnection and dismantling) low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
  • Plan, size and select low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
  • Carry out and apply the common processes and techniques used in the installation of air source heat pump (non-refrigerant circuits) systems.
  • Carry out and apply the common processes and techniques used in the installation of solar thermal systems.
  • Test, commission and handover air source heat pump (non-refrigerant circuits) systems.
  • Test, commission and handover solar thermal systems.
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on air source heat pump (non-refrigerant circuits) systems.
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on solar thermal systems.
  • Decommission (including disconnection and dismantling) air source heat pump (non-refrigerant circuits) systems.
  • Decommission (including disconnection and dismantling) solar thermal systems.
  • Plan, size and select air source heat pump (non-refrigerant circuits) systems.
  • Plan, size and select solar thermal systems.
  • Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing pipework.
  • Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing systems and appliances (cold water systems, hot water systems, sanitary appliances and pipework systems and rainwater systems).
  • Test, commission and handover plumbing pipework (above 28mm) and non-domestic plumbing systems and appliances in the workplace. (cold water systems and sanitary appliances and pipework systems).
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on plumbing (above 28mm) and non-domestic plumbing systems and appliances.
  • Decommission (including disconnection and dismantling) plumbing (above 28mm) and non-domestic plumbing systems and appliances.
  • Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
  • Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
  • Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
  • Plan tasks within plumbing and domestic heating systems industry.
  • Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
  • Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
  • Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
  • Decommission plumbing and domestic heating systems.
  • Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
  • Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
  • Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.

Training schedule

As an apprentice, you are expected to attend Bradford College 1 day a week.

Requirements

Desirable qualifications

GCSE in:

  • English (grade 4 / C+)
  • Maths (grade 4 / C+)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • Attention to detail
  • Customer care skills
  • Problem solving skills
  • Logical
  • Team working
  • Creative
  • Patience

About this employer

BRP Plumbing is a trusted, professional firm of heating engineers established in 2013. Since then, the company have been providing customers in and around Leeds with central heating installation, servicing, and repairs.

Company benefits

  • 28 days holiday
  • Pension

After this apprenticeship

Potential for permanent employment once apprenticeship is complete.

Ask a question

The contact for this apprenticeship is:

BRADFORD COLLEGE

Sonia Sidje

s.sidje@bradfordcollege.ac.uk

07776956378

The reference code for this apprenticeship is VAC2000026671.

Apply now

Closes in 6 days (Friday 24 April 2026 at 11:59pm)