Plumbing and Domestic Heating Technician Apprenticeship
CF Roberts (Electrical Contractors) Limited
Gloucestershire (GL51 9NN)
Closes on Thursday 30 April 2026
Posted on 26 March 2026
Contents
Summary
CF Roberts are looking for keen and enthusiastic apprentices for their September 2026 intake. In affiliation with our training provider, you will embark on an extensive 4 year apprenticeship, during which time you will learn ‘on the job’ whilst completing your qualification.
- Wage
-
£15,600 to £24,784.50, depending on your age
National Minimum Wage
Check minimum wage rates (opens in new tab)
22 days holiday +bank holidays, Contributory pension scheme, Excellent training and progression opportunities
- Training course
- Plumbing and domestic heating technician (level 3)
- Hours
-
Predominantly Monday to Friday, with a guaranteed minimum of 37.5 hours per week, however working & staying away from home Monday to Thursday and working evenings & weekends are a key part of the job.
37 hours 30 minutes a week
- Start date
-
Monday 7 September 2026
- Duration
-
4 years
- Positions available
-
2
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
- Install, maintain and repair water services e.g. heating pipework, radiators, boilers
- Install, maintain and repair ductwork systems e.g. ducts, extract grilles
- Diagnose and rectify faults on a range of heating & ventilating systems and equipment
- Commission systems to ensure maximum efficiency against design specification
- Domestic air source heat pumps & solar thermal systems technician duties
Where you'll work
Barrington House
Kingsditch Lane
Cheltenham
Gloucestershire
GL51 9NN
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
GLOUCESTERSHIRE COLLEGE
Training course
Plumbing and domestic heating technician (level 3)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
- Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
- Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
- Plan tasks within plumbing and domestic heating systems industry.
- Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
- Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
- Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
- Decommission plumbing and domestic heating systems.
- Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
- Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.
- Carry out and apply the common installation processes and techniques used in the installation and maintenance of natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input) in the workplace.
- Install, purge, test, commission and handover low pressure natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input).
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
- Decommission (including disconnection and dismantling) low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
- Plan, size and select low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
- Carry out and apply the common processes and techniques used in the installation of air source heat pump (non-refrigerant circuits) systems.
- Carry out and apply the common processes and techniques used in the installation of solar thermal systems.
- Test, commission and handover air source heat pump (non-refrigerant circuits) systems.
- Test, commission and handover solar thermal systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on air source heat pump (non-refrigerant circuits) systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on solar thermal systems.
- Decommission (including disconnection and dismantling) air source heat pump (non-refrigerant circuits) systems.
- Decommission (including disconnection and dismantling) solar thermal systems.
- Plan, size and select air source heat pump (non-refrigerant circuits) systems.
- Plan, size and select solar thermal systems.
- Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing pipework.
- Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing systems and appliances (cold water systems, hot water systems, sanitary appliances and pipework systems and rainwater systems).
- Test, commission and handover plumbing pipework (above 28mm) and non-domestic plumbing systems and appliances in the workplace. (cold water systems and sanitary appliances and pipework systems).
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on plumbing (above 28mm) and non-domestic plumbing systems and appliances.
- Decommission (including disconnection and dismantling) plumbing (above 28mm) and non-domestic plumbing systems and appliances.
- Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
- Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
- Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
- Plan tasks within plumbing and domestic heating systems industry.
- Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
- Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
- Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
- Decommission plumbing and domestic heating systems.
- Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
- Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.
Training schedule
You will split your time between working alongside a seasoned mentor and studying 1 day release with our training provider. You will work towards your NVQ Level 3 in Plumbing & Domestic Heating qualification as well as gaining essential hands on experience on site. You will also have the opportunity to attend various additional courses throughout your tenure with us.
Requirements
Desirable qualifications
GCSE in:
- English (grade C/4 or above)
- Maths (grade C/4 or above)
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Communication skills
- Attention to detail
- Organisation skills
- Problem solving skills
- Team working
- Initiative
- Physical fitness
Other requirements
This role will involve early starts, working away from home Monday to Thursday, being outdoors in winter, indoors in summer, working at height and may involve some heavy lifting.
About this employer
CF Roberts have been providing Electrical Services since the 1935 in Hereford. In 1997 CF Roberts moved its head office to its current location within Cheltenham, the larger site providing the facilities necessary for training and growth. In 2005 CF Roberts moved into Mechanical services, an area which we are applying substantial resources. The company is still a wholly owned family business following the original business ethics laid down by its founder Cyril Roberts. CF Roberts is a medium sized electrical and mechanical contractor. Carrying out works from £100 to £7.0 million in value. The company operates in 3 areas. Major works, covering New Build and ‘protype’ M&E projects up to 5m in value. Retail & Leisure, specialising in fit-out and refurbishment specialising in framework/multiple site agreements up to £3m in value, plus a 3rd sector concentrating on Minor works, roll out programmes and FM. We have branches in Nottingham, Hereford and Cheltenham.
After this apprenticeship
Upon completion you will be a fully qualified engineer. Depending on what you choose to specialise in you may go onto the tools as a plumber/heating engineer, or work in the office as part of the design team or project management team. The majority of our apprentices stay on with us and have forged a successful career.
Ask a question
The contact for this apprenticeship is:
CF Roberts (Electrical Contractors) Limited
Amanda Aessia
info@cfroberts.co.uk
01242 571100
The reference code for this apprenticeship is VAC2000023551.
Apply now
Closes on Thursday 30 April 2026