Engineering Maintenance Technician Apprenticeship

Hain UK

Grimsby (DN37 9TW)

Closes in 9 days (Sunday 29 March 2026)

Posted on 19 March 2026

Print

Contents

Summary

An apprentice engineer leading to a career as a multi-skilled engineer /process control engineer.

To learn the knowledge and apply practical skills that will enable the post holder to become a valued and fully trained member of the maintenance team at the end of the apprenticeship period. 

Wage

£21,840 a year

Check minimum wage rates (opens in new tab)

Training course
Engineering maintenance technician - dual discipline (level 3)
Hours
Monday to Friday 8am to 4.30pm, shifts, may work evenings and weekends.

40 hours a week

Start date

Monday 7 September 2026

Duration

4 years

Positions available

2

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

Providing maintenance support to production to ensure that equipment operates effectively and safely. This includes providing scheduled preventative maintenance, first line servicing, calibration and acceptance testing, on a range of electrical, electro-mechanical and mechanical equipment.

Where you'll work

Hain Celestrial
Lakeside
Europarc
Grimsby
DN37 9TW

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

HCF CATCH LIMITED

Training course

Engineering maintenance technician - dual discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.
  • Electrical and control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and control and instrumentation. Select, check, and use electrical maintenance tools, measurement, and test equipment. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
  • Electrical and control and instrumentation. Use electrical diagnostic equipment and apply fault finding and rectification techniques. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and control and instrumentation. Apply problem solving and critical reasoning techniques.
  • Electrical and control and instrumentation. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and control and instrumentation. Remove and replace electrical parts.
  • Electrical and control and instrumentation. Prepare and terminate electrical cables.
  • Electrical and control and instrumentation. Set up and adjust electrical aspects of plant.
  • Electrical and control and instrumentation. Clean parts. For example, removal of dust and debris.
  • Electrical and control and instrumentation. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and control and instrumentation. Conduct functional testing.
  • Electrical and control and instrumentation. Inspect and test control and instrumentation systems.
  • Electrical and control and instrumentation. Check calibration and make adjustments.
  • Electrical and control and instrumentation. Check loop function.
  • Electrical and control and instrumentation. Set up and adjust control and instrumentation systems.
  • Electrical and control and instrumentation. Remove and replace instruments and sensors.
  • Electrical and control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
  • Electrical and mechanical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and mechanical. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and mechanical. Select, check, and use electrical and mechanical maintenance tools, measurement, and test equipment.
  • Electrical and mechanical. Use electrical and mechanical diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and mechanical. Apply problem solving and critical reasoning techniques.
  • Electrical and mechanical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and mechanical. Remove and replace electrical parts.
  • Electrical and mechanical. Prepare and terminate electrical cables.
  • Electrical and mechanical. Set up, align, and adjust electrical aspects of plant.
  • Electrical and mechanical. Clean parts. For example, removal of dust and debris.
  • Electrical and mechanical. Conduct functional testing.
  • Electrical and mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
  • Electrical and mechanical. Remove and replace mechanical parts.
  • Electrical and mechanical. Examine mechanical parts for defects. For example, pump seals.
  • Electrical and mechanical. Set up, align, and adjust mechanical aspects of plant.
  • Electrical and mechanical. Lubricate mechanical assemblies.
  • Electrical and mechanical. Apply bench fitting techniques.
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.

Training schedule

The apprenticeship follows a 4-year programme, with the first year spent off the job at CATCH in Stallingborough. This would be Monday – Friday 8.30am – 4pm.

The remainder of the apprenticeship is then completed on-site with the employer. 

Requirements

Essential qualifications

GCSE in:

Maths & English & 1 other (grade A*-C (9-4))

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • Customer care skills
  • Problem solving skills

About this employer

The Hain Celestial Group is one of the UK’s leading food companies.  We are the business behind a host of household brands - Hartley's jams and jellies, Sun-Pat peanut butters, New Covent Garden Soup Co., Linda McCartney's, Yorkshire Provender and Farmhouse Fare to name a few.  Our site at Lakeside is our dedicated Soup facility producing quality products including the brands New Covent Garden and Yorkshire Provender and it’s an exciting time to be working with us. 

http://Hain.com (opens in new tab)

Company benefits

You will have access to Pension, Medical Benefit with Healthshield and life assurance. Access to our Benefits Hub, which offers many discounts from a range of retailers and access to our Wellbeing portal.

After this apprenticeship

Successful completion of the apprenticeship could lead to a higher-level apprenticeship or full-time employment for the right candidate.

You will have developed a variety of interchangeable skills and have an in-depth understanding of manufacturing and processes.

Ask a question

The contact for this apprenticeship is:

HCF CATCH LIMITED

Rick Stemp

Rick.Stemp@Hain.com

0330 055 1230

The reference code for this apprenticeship is VAC2000021718.

Apply now

Closes in 9 days (Sunday 29 March 2026)

After signing in, you’ll apply for this apprenticeship on the company's website.