Apprentice Plumbing & Heating Technician
EYRE BUILDING SERVICES GROUP LIMITED
Cambridge (CB23 7AJ)
Closes in 24 days (Monday 6 April 2026 at 11:59pm)
Posted on 11 March 2026
Contents
Summary
We are looking for an Apprentice Plumbing & Heating Engineering Technician to join our team. The successful applicant will begin studies on a Level 3 Diploma. This initial qualification is delivered at a local college one day a week. Based in the office, you will cover other locations.
- Wage
-
£14,722.50 for your first year, then could increase depending on your age
National Minimum Wage rate for apprentices
- Training course
- Plumbing and domestic heating technician (level 3)
- Hours
-
Monday - Friday, 07:30-16:30.
37 hours 30 minutes a week
- Start date
-
Tuesday 1 September 2026
- Duration
-
4 years
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
You will assist qualified engineers in installing, maintaining, and repairing plumbing and heating systems across commercial environments. The role supports the development of technical knowledge while working towards the Level 3 qualification, ensuring safe, compliant, and high‑quality workmanship.
Where you'll work
Horizon Park
Barton Road, Comberton
Cambridge
CB23 7AJ
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
CAMBRIDGE REGIONAL COLLEGE
Training course
Plumbing and domestic heating technician (level 3)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
- Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
- Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
- Plan tasks within plumbing and domestic heating systems industry.
- Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
- Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
- Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
- Decommission plumbing and domestic heating systems.
- Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
- Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.
- Carry out and apply the common installation processes and techniques used in the installation and maintenance of natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input) in the workplace.
- Install, purge, test, commission and handover low pressure natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input).
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
- Decommission (including disconnection and dismantling) low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
- Plan, size and select low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
- Carry out and apply the common processes and techniques used in the installation of air source heat pump (non-refrigerant circuits) systems.
- Carry out and apply the common processes and techniques used in the installation of solar thermal systems.
- Test, commission and handover air source heat pump (non-refrigerant circuits) systems.
- Test, commission and handover solar thermal systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on air source heat pump (non-refrigerant circuits) systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on solar thermal systems.
- Decommission (including disconnection and dismantling) air source heat pump (non-refrigerant circuits) systems.
- Decommission (including disconnection and dismantling) solar thermal systems.
- Plan, size and select air source heat pump (non-refrigerant circuits) systems.
- Plan, size and select solar thermal systems.
- Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing pipework.
- Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing systems and appliances (cold water systems, hot water systems, sanitary appliances and pipework systems and rainwater systems).
- Test, commission and handover plumbing pipework (above 28mm) and non-domestic plumbing systems and appliances in the workplace. (cold water systems and sanitary appliances and pipework systems).
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on plumbing (above 28mm) and non-domestic plumbing systems and appliances.
- Decommission (including disconnection and dismantling) plumbing (above 28mm) and non-domestic plumbing systems and appliances.
- Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
- Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
- Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
- Plan tasks within plumbing and domestic heating systems industry.
- Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
- Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
- Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
- Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
- Decommission plumbing and domestic heating systems.
- Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
- Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
- Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.
Training schedule
- One day per week at College
- On the job training
- Earn as you work
Requirements
Essential qualifications
GCSE in:
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Communication skills
- Attention to detail
- Organisation skills
- Customer care skills
- Team working
- Full UK driving license
About this employer
We deliver quality Mechanical, Electrical and Maintenance services throughout East Anglia working in the commercial and industrial sectors.
Eyre (Electrical) Limited was formed on 1st October 1964 and founded by Jack Eyre, trading as Electrical Contractors and Retailers from two Victorian houses located on Sprowston Road and Magdalen road in Norwich
On 30th December 1983, Eyre Electrical Limited joined the R G Carter Group.
The company relocated to Yarmouth Road, Thorpe St Andrews in March 1997, remodeling the business to provide mechanical as well as electrical services trading as Eyre Electrical Mechanical.
We provide a fully integrated M&E Project Management service through teams of highly competent engineering staff and on-site engineers. In addition, our Maintenance division provides a dedicated Planned, Preventative and Reactive Maintenance service tailored to meet customer and asset needs.
https://www.eyregroup.co.uk/ (opens in new tab)
Company benefits
- Company pension
- Employee discount scheme
- Free on-site parking
- Health & wellbeing programme
- Life insurance
- Sick pay
After this apprenticeship
Qualified Electrician.
Ask a question
The contact for this apprenticeship is:
CAMBRIDGE REGIONAL COLLEGE
The reference code for this apprenticeship is VAC2000020546.
Apply now
Closes in 24 days (Monday 6 April 2026 at 11:59pm)