Instrumentation Control and Automation Engineering Level 3 Apprentice
THAMES WATER UTILITIES LIMITED
Kingston Upon Thames (KT1 3BW)
Closes in 21 days (Friday 6 March 2026)
Posted on 11 February 2026
Contents
Summary
Join Thames Water as an Instrumentation, Control, and Automation Apprentice. You’ll gain hands-on experience managing the technology that monitors and controls our water and wastewater systems. You’ll also work towards a Level 3 Engineering Maintenance Technician qualification, opening the door to a long-term career.
- Wage
-
£22,500 a year
- Training course
- Engineering maintenance technician - single discipline (level 3)
- Hours
-
38-hour week over four working days plus one training day, with a 7:30 am start Monday - Friday. Shifts to be confirmed.
38 hours a week
- Start date
-
Tuesday 1 September 2026
- Duration
-
3 years
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
What you’ll be doing as an ICA Engineer Apprentice:
- Learn to carry out planned maintenance, general repairs, and equipment modifications under guidance
- Test, inspect, and troubleshoot systems using condition-based monitoring
- Become fully trained to use Programmable Logic Controllers (PLC’s) and SCADA (Supervisory Control and Data Acquisition) systems
- Work with the instruments and technology that monitor and manage Thames Water’s water and wastewater operations across the network
Where you'll work
Hogsmill Sewage Treatment Works
Lower Marsh Lane
Kingston Upon Thames
KT1 3BW
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
BASINGSTOKE COLLEGE OF TECHNOLOGY
Training course
Engineering maintenance technician - single discipline (level 3)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
- Use planning, prioritising, organising, and time management techniques to plan tasks.
- Identify and organise resources to complete tasks. For example, consumables.
- Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
- Identify equipment to work on. Check plant configuration is as defined.
- Prepare the work area for maintenance tasks.
- Identify environmental and health and safety hazards and risks and apply control measures.
- Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
- Follow security procedures. For example, site access, document classification, and securing assets.
- Follow emergency incident and response procedures.
- Apply sustainability principles. For example, minimising waste.
- Segregate items for reuse, recycling, and waste.
- Use mathematical principles and formulae to support engineering maintenance.
- Apply engineering maintenance standards and procedures.
- Apply foreign material exclusion procedures.
- Follow maintenance tools and equipment control procedures. For example, handling and storage.
- Reinstate the work area.
- Apply team working principles.
- Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
- Escalate issues outside limits of responsibility.
- Record information.
- Produce or update documents. For example, handover notes and reports.
- Identify and highlight issues (red pen) with technical drawings.
- Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
- Apply continuous improvement techniques to identify improvement suggestions.
- Carry out and record planned and unplanned learning and development activities.
- Electrical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
- Electrical. Select, check, and use electrical maintenance tools, measurement, and test equipment.
- Electrical. Use electrical diagnostic equipment and apply fault finding and rectification techniques.
- Electrical. Apply problem solving and critical reasoning techniques.
- Electrical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
- Electrical. Remove and replace electrical parts.
- Electrical. Prepare and terminate electrical cables.
- Electrical. Set up, align and adjust electrical aspects of plant.
- Electrical. Clean parts. For example, removal of dust and debris.
- Electrical. Conduct and confirm electrical and connected services deisolation.
- Electrical. Conduct functional testing.
- Control and instrumentation. Conduct and confirm safe isolation of connected services
- Control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
- Control and instrumentation. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
- Control and instrumentation. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
- Control and instrumentation. Apply problem solving and critical reasoning techniques.
- Control and instrumentation. Inspect and test control and instrumentation systems.
- Control and instrumentation. Check calibration and make adjustments.
- Control and instrumentation. Check loop function.
- Control and instrumentation. Set up and adjust control and instrumentation systems.
- Control and instrumentation. Clean parts. For example, removal of dust and debris.
- Control and instrumentation. Remove and replace instruments and sensors.
- Control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
- Control and instrumentation. Conduct and confirm electrical and connected services deisolation.
- Control and instrumentation. Conduct functional testing.
- Mechanical. Check and confirm safe isolation of connected services.
- Mechanical. Select, check, and use mechanical maintenance tools and equipment.
- Mechanical. Use mechanical diagnostic equipment and apply fault finding and rectification techniques.
- Mechanical. Apply problem solving and critical reasoning techniques.
- Mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
- Mechanical. Remove and replace mechanical parts.
- Mechanical. Examine mechanical parts for defects. For example, pump seals.
- Mechanical. Set up, align, and adjust mechanical aspects of plant.
- Mechanical. Clean parts. For example, removal of dust and debris.
- Mechanical. Lubricate mechanical assemblies.
- Mechanical. Confirm electrical and connected services deisolation.
- Mechanical. Conduct functional testing.
- Mechanical. Apply bench fitting techniques.
- Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
- Use planning, prioritising, organising, and time management techniques to plan tasks.
- Identify and organise resources to complete tasks. For example, consumables.
- Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
- Identify equipment to work on. Check plant configuration is as defined.
- Prepare the work area for maintenance tasks.
- Identify environmental and health and safety hazards and risks and apply control measures.
- Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
- Follow security procedures. For example, site access, document classification, and securing assets.
- Follow emergency incident and response procedures.
- Apply sustainability principles. For example, minimising waste.
- Segregate items for reuse, recycling, and waste.
- Use mathematical principles and formulae to support engineering maintenance.
- Apply engineering maintenance standards and procedures.
- Apply foreign material exclusion procedures.
- Follow maintenance tools and equipment control procedures. For example, handling and storage.
- Reinstate the work area.
- Apply team working principles.
- Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
- Escalate issues outside limits of responsibility.
- Record information.
- Produce or update documents. For example, handover notes and reports.
- Identify and highlight issues (red pen) with technical drawings.
- Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
- Apply continuous improvement techniques to identify improvement suggestions.
- Carry out and record planned and unplanned learning and development activities.
Training schedule
- Knowledge, skills, behaviours as set out in the standard Engineering Maintenance Technician Level 3
- City & Guilds Diploma in Engineering (single discipline)
- You’ll train with Basingstoke College of Technology through on-campus or online sessions, with travel and accommodation covered in line with our travel expense policy
Requirements
Essential qualifications
GCSE in:
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Communication skills
- IT skills
- Attention to detail
- Organisation skills
- Customer care skills
- Problem solving skills
- Number skills
- Analytical skills
- Logical
- Team working
- Initiative
About this employer
Who are we? We’re the UK’s largest water and wastewater company, with more than 16 million customers relying on us every day to supply water for their taps and toilets. We want to build a better future for all, helping our customers, communities, people, and the planet to thrive. It’s a big job and we’ve got a long way to go, so we need help from passionate and skilled people, committed to making a difference and getting us to where we want to be in the years and decades to come
https://careers.thameswater.co.uk/our-roles/early-careers/ (opens in new tab)
Company benefits
- Performance-related pay plan directly linked to company performance targets
- Access to lots of benefits to help you take care of you and your family’s health and wellbeing, and your finances
Disability Confident
A fair proportion of interviews for this apprenticeship will be offered to applicants with a disability or long-term health condition. This includes non-visible disabilities and conditions.
You can choose to be considered for an interview under the Disability Confident scheme. You’ll need to meet the essential requirements to be considered for an interview.
After this apprenticeship
- Permanent contract with a 36-month structured programme
Ask a question
The contact for this apprenticeship is:
BASINGSTOKE COLLEGE OF TECHNOLOGY
The reference code for this apprenticeship is VAC2000014550.
Apply now
Closes in 21 days (Friday 6 March 2026)
After signing in, you’ll apply for this apprenticeship on the company's website.