Maintenance Engineering Apprentice

ESSO PETROLEUM COMPANY,LIMITED

Southampton (SO45 1TX)

Closes on Sunday 12 April 2026

Posted on 9 February 2026

Print

Contents

Summary

ExxonMobil are currently recruiting for Maintenance Engineering Apprentices across three trades; mechanical, electrical, and instrumentation, to join our team at our integrated Fawley Refinery and Chemical Complex in Fawley, Hampshire

Wage

£20,240 a year

Check minimum wage rates (opens in new tab)

Annual pay increases

Training course
Engineering maintenance technician - single discipline (level 3)
Hours
37.5 hours per week varying between 0730-1530 and 0800-1600 during year one, generally 0730-1530 during year two with the exception of one day per week 0800-1600 and 0730-1530 in year three subject to minimal variations

37 hours 30 minutes a week

Start date

Tuesday 1 September 2026

Duration

3 years

Positions available

11

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

  • Outside on the Refinery maintaining equipment by shadowing experienced technicians
  • Learning skills to identify how equipment works
  • Learning how to repair and maintain equipment

Where you'll work

Fawley Refinery
Fawley
Southampton
SO45 1TX

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

COGENT SSC LIMITED

Training course

Engineering maintenance technician - single discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or update documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen) with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.
  • Electrical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical. Select, check, and use electrical maintenance tools, measurement, and test equipment.
  • Electrical. Use electrical diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical. Apply problem solving and critical reasoning techniques.
  • Electrical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical. Remove and replace electrical parts.
  • Electrical. Prepare and terminate electrical cables.
  • Electrical. Set up, align and adjust electrical aspects of plant.
  • Electrical. Clean parts. For example, removal of dust and debris.
  • Electrical. Conduct and confirm electrical and connected services deisolation.
  • Electrical. Conduct functional testing.
  • Control and instrumentation. Conduct and confirm safe isolation of connected services
  • Control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Control and instrumentation. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
  • Control and instrumentation. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
  • Control and instrumentation. Apply problem solving and critical reasoning techniques.
  • Control and instrumentation. Inspect and test control and instrumentation systems.
  • Control and instrumentation. Check calibration and make adjustments.
  • Control and instrumentation. Check loop function.
  • Control and instrumentation. Set up and adjust control and instrumentation systems.
  • Control and instrumentation. Clean parts. For example, removal of dust and debris.
  • Control and instrumentation. Remove and replace instruments and sensors.
  • Control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
  • Control and instrumentation. Conduct and confirm electrical and connected services deisolation.
  • Control and instrumentation. Conduct functional testing.
  • Mechanical. Check and confirm safe isolation of connected services.
  • Mechanical. Select, check, and use mechanical maintenance tools and equipment.
  • Mechanical. Use mechanical diagnostic equipment and apply fault finding and rectification techniques.
  • Mechanical. Apply problem solving and critical reasoning techniques.
  • Mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
  • Mechanical. Remove and replace mechanical parts.
  • Mechanical. Examine mechanical parts for defects. For example, pump seals.
  • Mechanical. Set up, align, and adjust mechanical aspects of plant.
  • Mechanical. Clean parts. For example, removal of dust and debris.
  • Mechanical. Lubricate mechanical assemblies.
  • Mechanical. Confirm electrical and connected services deisolation.
  • Mechanical. Conduct functional testing.
  • Mechanical. Apply bench fitting techniques.
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or update documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen) with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.

Training schedule

This training schedule has not been finalised. Check with this employer if you’ll need to travel to a college or training location for this apprenticeship.

Requirements

Essential qualifications

GCSE in:

  • Any Subject (grade 4)
  • English Language (grade 4)
  • Mathematices (grade 4)
  • Science (grade 4)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • IT skills
  • Attention to detail
  • Organisation skills
  • Problem solving skills
  • Number skills
  • Analytical skills
  • Logical
  • Team working
  • Initiative

Other requirements

  • Wearing personal protective equipment
  • Working outdoors in all weathers
  • Working at height

About this employer

At ExxonMobil, our vision is to lead in energy innovations that advance modern living and a net-zero future. As one of the world’s largest publicly traded energy and chemical companies, we are powered by a unique and diverse workforce fuelled by the pride in what we do and what we stand for. The success of our Upstream, Product Solutions and Low Carbon Solutions businesses is the result of the talent, curiosity and drive of our people. They bring solutions every day to optimize our strategy in energy, chemicals, lubricants and lower-emissions technologies. We invite you to bring your ideas to ExxonMobil to help create sustainable solutions that improve quality of life and meet society’s evolving needs. Learn more about our What and our Why and how we can work together. ExxonMobil has operated in the U.K. for more than 135 years. We are best known today for the marketing of our Esso fuels and Mobil 1 lubricants and for our petrochemicals. We have refining and chemical operations in the UK, we operate the UK’s biggest private pipeline network and we retain a non-operated share in a number of fields in the North Sea. More recently, we are developing our involvement in lower emission projects in the UK, building on our experience in carbon capture and storage (CCS), hydrogen production and biofuels.

https://www.exxonmobil-fawley.co.uk/ (opens in new tab)

Company benefits

Competitive benefits package including Company share scheme (optional)

After this apprenticeship

Potential for permanent employment with ExxonMobil. On completion of your apprenticeship, you will have gained skills you can use for your entire career – and all over the world.

Ask a question

The contact for this apprenticeship is:

COGENT SSC LIMITED

The reference code for this apprenticeship is VAC2000013588.

Apply now

Closes on Sunday 12 April 2026

After signing in, you’ll apply for this apprenticeship on the company's website.