Engineering Maintenance Technician Apprentice

AGGREKO UK LIMITED

Bedfordshire (MK45 5JR)

Closes in 30 days (Friday 6 March 2026)

Posted on 3 February 2026

Print

Contents

Summary

Bring your energy to Aggreko as an apprentice based in our Bedford depot. You’ll gain hands-on experience working alongside skilled engineers. Maintain, install, and repair. All our equipment – from advanced power generation to battery storage. All the time developing essential technical and safety skills.

Wage

£18,720 a year

Check minimum wage rates (opens in new tab)

Training course
Engineering maintenance technician - dual discipline (level 3)
Hours
Monday - Friday, Shifts to be confirmed.

40 hours a week

Start date

Monday 17 August 2026

Duration

4 years

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

Your day as an apprentice:

As an Aggreko apprentice, no two days are the same. Each day begins with a team briefing focused on safety and priorities. You’ll then work closely with a senior engineer on a wide range of tasks -  from equipment preparation and installation to servicing and fault diagnosis. Throughout, you’ll build practical skills with hands-on support and guidance, always working safely to keep everyone safe.

What you’ll learn and do:

  • Carry out maintenance, installation, and repair on power generation and battery storage equipment 
  • Develop your knowledge and confidence using a range of hand tools
  • Diagnose faults and troubleshoot issues
  • Work safely to keep everyone safe 
  • Collaborate with teams to deliver excellent service and contribute to key projects
  • Use IT tools like laptops and mobile devices to support your work
  • Balance practical work experience with college study towards a Level 3 Engineering Maintenance Technician qualification 

Where you'll work

Maulden Road Industrial Estate
Enterprise Way
Flitwick
Bedfordshire
MK45 5JR

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

MILTON KEYNES COLLEGE

Training course

Engineering maintenance technician - dual discipline (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.
  • Electrical and control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and control and instrumentation. Select, check, and use electrical maintenance tools, measurement, and test equipment. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
  • Electrical and control and instrumentation. Use electrical diagnostic equipment and apply fault finding and rectification techniques. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and control and instrumentation. Apply problem solving and critical reasoning techniques.
  • Electrical and control and instrumentation. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and control and instrumentation. Remove and replace electrical parts.
  • Electrical and control and instrumentation. Prepare and terminate electrical cables.
  • Electrical and control and instrumentation. Set up and adjust electrical aspects of plant.
  • Electrical and control and instrumentation. Clean parts. For example, removal of dust and debris.
  • Electrical and control and instrumentation. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and control and instrumentation. Conduct functional testing.
  • Electrical and control and instrumentation. Inspect and test control and instrumentation systems.
  • Electrical and control and instrumentation. Check calibration and make adjustments.
  • Electrical and control and instrumentation. Check loop function.
  • Electrical and control and instrumentation. Set up and adjust control and instrumentation systems.
  • Electrical and control and instrumentation. Remove and replace instruments and sensors.
  • Electrical and control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
  • Electrical and mechanical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
  • Electrical and mechanical. Conduct and confirm electrical and connected services isolation and deisolation.
  • Electrical and mechanical. Select, check, and use electrical and mechanical maintenance tools, measurement, and test equipment.
  • Electrical and mechanical. Use electrical and mechanical diagnostic equipment and apply fault finding and rectification techniques.
  • Electrical and mechanical. Apply problem solving and critical reasoning techniques.
  • Electrical and mechanical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
  • Electrical and mechanical. Remove and replace electrical parts.
  • Electrical and mechanical. Prepare and terminate electrical cables.
  • Electrical and mechanical. Set up, align, and adjust electrical aspects of plant.
  • Electrical and mechanical. Clean parts. For example, removal of dust and debris.
  • Electrical and mechanical. Conduct functional testing.
  • Electrical and mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
  • Electrical and mechanical. Remove and replace mechanical parts.
  • Electrical and mechanical. Examine mechanical parts for defects. For example, pump seals.
  • Electrical and mechanical. Set up, align, and adjust mechanical aspects of plant.
  • Electrical and mechanical. Lubricate mechanical assemblies.
  • Electrical and mechanical. Apply bench fitting techniques.
  • Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
  • Use planning, prioritising, organising, and time management techniques to plan tasks.
  • Identify and organise resources to complete tasks. For example, consumables.
  • Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
  • Identify equipment to work on. Check plant configuration is as defined.
  • Prepare the work area for maintenance tasks.
  • Identify environmental and health and safety hazards and risks and apply control measures.
  • Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
  • Follow security procedures. For example, site access, document classification, and securing assets.
  • Follow emergency incident and response procedures.
  • Apply sustainability principles. For example, minimising waste.
  • Segregate items for reuse, recycling, and waste.
  • Use mathematical principles and formulae to support engineering maintenance.
  • Apply engineering maintenance standards and procedures.
  • Apply foreign material exclusion procedures.
  • Follow maintenance tools and equipment control procedures. For example, handling and storage.
  • Reinstate the work area.
  • Apply team working principles.
  • Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
  • Escalate issues outside limits of responsibility.
  • Record information.
  • Produce or amend documents. For example, handover notes and reports.
  • Identify and highlight issues (red pen), with technical drawings.
  • Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
  • Apply continuous improvement techniques to identify improvement suggestions.
  • Carry out and record planned and unplanned learning and development activities.

Training schedule

You will follow a four-year apprenticeship programme completing an Engineering Maintenance Technician Level 3 qualification. College training will be delivered 1-2 days per week

Requirements

Essential qualifications

GCSE in:

  • English (grade Grade 4 or above)
  • Maths (grade Grade 4 or above)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

  • Communication skills
  • Attention to detail
  • Problem solving skills
  • Analytical skills
  • Logical
  • Team working
  • Initiative

About this employer

At Aggreko, we are in the business of ‘on’.

Power without pause. Heating, cooling and oil-free air without end. We keep our customers’ worlds on. From world-class events that last a few weeks to mining operations and remote communities who rely on us for decades.

https://careers.aggreko.com/uk-ie/en-gb/about-us (opens in new tab)

After this apprenticeship

  • Completing your apprenticeship opens the door to a range of exciting opportunities. Stay local. Work across the UK.
  • Explore opportunities further afield. The choice is yours and Aggreko is here to support your growth and help you shape a career that matches your goals

Ask a question

The contact for this apprenticeship is:

MILTON KEYNES COLLEGE

The reference code for this apprenticeship is VAC2000012667.

Apply now

Closes in 30 days (Friday 6 March 2026)

After signing in, you’ll apply for this apprenticeship on the company's website.