Plumbing Apprentice

Summary

We're looking for a motivated individual to join a professional team as a Plumbing Apprentice at Kesselmann. No prior experience is required — just a willingness to learn, a strong work ethic, and a genuine interest in the trade.

Wage

£15,704 for your first year, then could increase depending on your age

National Minimum Wage rate for apprentices

Check minimum wage rates (opens in new tab)

Training course

Plumbing and domestic heating technician (level 3)

Hours

Monday to Friday 8.00am to 5.00pm.

40 hours a week

Start date

Friday 1 August 2025

Duration

4 years

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

Duties include:

Assist qualified plumbers with installation, maintenance, and repair of plumbing systems
Measure, cut, and assemble pipes and fittings using hand and power tools
Help install domestic and commercial water systems, such as sinks, toilets, showers, radiators, and boilers
Carry out basic fault-finding and help with diagnostics
Prepare and clean work areas, tools, and equipment
Follow health and safety procedures at all times on-site
Load, unload, and transport tools and materials as needed
Learn to read and interpret technical drawings and plumbing plans
Keep accurate records of work completed under supervision
Attend training sessions and complete coursework as part of the apprenticeship programme

Where you'll work

Louis Pearlman Centre
Goulton Street
Hull
HU3 4DL

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

College or training organisation

HULL COLLEGE

Your training course

Plumbing and domestic heating technician (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents

Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
Plan tasks within plumbing and domestic heating systems industry.
Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
Decommission plumbing and domestic heating systems.
Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.
Carry out and apply the common installation processes and techniques used in the installation and maintenance of natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input) in the workplace.
Install, purge, test, commission and handover low pressure natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input).
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
Decommission (including disconnection and dismantling) low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
Plan, size and select low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
Carry out and apply the common processes and techniques used in the installation of air source heat pump (non-refrigerant circuits) systems.
Carry out and apply the common processes and techniques used in the installation of solar thermal systems.
Test, commission and handover air source heat pump (non-refrigerant circuits) systems.
Test, commission and handover solar thermal systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on air source heat pump (non-refrigerant circuits) systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on solar thermal systems.
Decommission (including disconnection and dismantling) air source heat pump (non-refrigerant circuits) systems.
Decommission (including disconnection and dismantling) solar thermal systems.
Plan, size and select air source heat pump (non-refrigerant circuits) systems.
Plan, size and select solar thermal systems.
Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing pipework.
Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing systems and appliances (cold water systems, hot water systems, sanitary appliances and pipework systems and rainwater systems).
Test, commission and handover plumbing pipework (above 28mm) and non-domestic plumbing systems and appliances in the workplace. (cold water systems and sanitary appliances and pipework systems).
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on plumbing (above 28mm) and non-domestic plumbing systems and appliances.
Decommission (including disconnection and dismantling) plumbing (above 28mm) and non-domestic plumbing systems and appliances.
Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
Plan tasks within plumbing and domestic heating systems industry.
Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
Decommission plumbing and domestic heating systems.
Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.

Your training plan

Hull College will deliver the Apprenticeship Standard Plumbing Level 3
You will be trained in the workplace by a highly skilled mentor alongside your Hull College Skills Coach who will help support and guide you to become a skilled employee

Requirements

Essential qualifications

GCSE in:

English (grade 4)
Maths (grade 4)

Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.

Skills

Attention to detail
Organisation skills
Customer care skills
Problem solving skills
Administrative skills
Number skills
Analytical skills
Logical
Team working
Initiative
Patience

About this company

Welcome to Kesselmann, your trusted local specialists in boiler, heating, plumbing, and gas services. Based in Hull, we serve communities across East Riding of Yorkshire and North Lincolnshire. Here at Kesselmann, we’re dedicated to keeping your home safe, warm, and running efficiently.

https://kesselmann.co.uk/#/ (opens in new tab)

After this apprenticeship

The successful candidate will be given the opportunity of full-time employment upon completion of the advanced apprenticeship if available.

Ask a question

The contact for this apprenticeship is: