Motor Vehicle Service and Maintenance Technician Apprentice
ALBURY REPAIR WORKS LIMITED
WALTHAM CROSS (EN8 8NS)
Closes in 8 days (Friday 9 May 2025 at 11:59pm)
Posted on 13 March 2025
Contents
Summary
Servicing and repairing light vehicles such as cars and vans, working on all systems found in the vehicle.
- Wage
-
£15,704 for your first year, then could increase depending on your age
National Minimum Wage rate for apprentices
- Training course
- Autocare technician (level 2)
- Hours
-
Monday to Thursday - 8am to 6pm.
Friday - college day.
40 hours a week
- Start date
-
Monday 19 May 2025
- Duration
-
2 years
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you’ll do at work
- Work independently but also operate as an effective team member.
- Ordering and managing delivery of parts.
- Replacing simple parts.
- Solving complex faults with the use of diagnostic methods and equipment.
- Test the function of repaired and fitted components.
- Maintenance of tools and the workshop.
Where you’ll work
9 ALBURY GROVE ROAD
CHESHUNT
WALTHAM CROSS
EN8 8NS
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
College or training organisation
HERTFORD REGIONAL COLLEGE
Your training course
Autocare technician (level 2)
Equal to GCSE
Course contents
- Comply with health and safety procedures in the workplace in compliance with regulations, standards, and guidance.
- Prepare the vehicle and working area before the work activity. For example, remove or mitigate slip and trip hazards.
- Maintain and restore the work area during and on completion of the activity.
- Store, maintain, including calibration checks, and return tools and equipment to storage.
- Access vehicle technical data to inform inspections and make judgements on wear and serviceability.
- Comply with environmental and sustainability procedures, regulations, standards, and guidance. Segregate resources for reuse, recycling, and disposal.
- Apply vehicle safety inspection and routine maintenance procedures using vehicle specific data on car, car derived van or light goods vehicle.
- Select and use tools and equipment, mechanical and electrical measuring tools, and diagnostic equipment.
- Remove and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
- Remove, repair and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
- Inspect, remove, and replace of parts or components in cars, car derived vans, or light goods vehicles for the following: steering systems and suspension systems, braking systems, emission systems, air conditioning systems, battery and charging systems, fluid and filtration systems.
- Apply state-of-health condition monitoring tests to high voltage batteries and chargers for electrified cars, car derived vans, or light goods vehicles.
- Apply four-wheel geometry checks and adjustments to cars, car derived vans, and light goods vehicles.
- Apply safe working practices and procedures to isolate electrified vehicles for maintenance.
- Record vehicle service maintenance, parts replacement, or repair.
- Apply customer service principles and organisational customer care practices. For example, identifying customer and vehicle needs, resolve low level customer complaints, make recommendations to customers based on results of inspection, maintenance, or repair of vehicles, customer payment transactions and organisational sales processes.
- Provide quotation of cost and order automotive parts, products, and consumables applicable to the vehicle.
- Apply procedures for stock and parts storage: ordering, checking and stock rotation.
- Apply organisational sales processes. For example, show and tell, features and benefits, consultative selling, mini closing and closing.
- Apply team working principles.
- Comply with equity, diversity, and inclusion guidance.
- Communicate with others verbally, for example customers, suppliers, and colleagues.
- Communicate in writing, for example with internal and external customers, colleagues, and managers.
- Use information and digital technology systems. Comply with GDPR and cyber security.
- Complete and record learning and development activities.
- Apply procedures to check and replace fluids, and filtration parts.
- Comply with health and safety procedures in the workplace in compliance with regulations, standards, and guidance.
- Prepare the vehicle and working area before the work activity. For example, remove or mitigate slip and trip hazards.
- Maintain and restore the work area during and on completion of the activity.
- Store, maintain, including calibration checks, and return tools and equipment to storage.
- Access vehicle technical data to inform inspections and make judgements on wear and serviceability.
- Comply with environmental and sustainability procedures, regulations, standards, and guidance. Segregate resources for reuse, recycling, and disposal.
- Apply vehicle safety inspection and routine maintenance procedures using vehicle specific data on car, car derived van or light goods vehicle.
- Select and use tools and equipment, mechanical and electrical measuring tools, and diagnostic equipment.
- Remove and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
- Remove, repair and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
- Inspect, remove, and replace of parts or components in cars, car derived vans, or light goods vehicles for the following: steering systems and suspension systems, braking systems, emission systems, air conditioning systems, battery and charging systems, fluid and filtration systems.
- Apply state-of-health condition monitoring tests to high voltage batteries and chargers for electrified cars, car derived vans, or light goods vehicles.
- Apply four-wheel geometry checks and adjustments to cars, car derived vans, and light goods vehicles.
- Apply safe working practices and procedures to isolate electrified vehicles for maintenance.
- Record vehicle service maintenance, parts replacement, or repair.
- Apply customer service principles and organisational customer care practices. For example, identifying customer and vehicle needs, resolve low level customer complaints, make recommendations to customers based on results of inspection, maintenance, or repair of vehicles, customer payment transactions and organisational sales processes.
- Provide quotation of cost and order automotive parts, products, and consumables applicable to the vehicle.
- Apply procedures for stock and parts storage: ordering, checking and stock rotation.
- Apply organisational sales processes. For example, show and tell, features and benefits, consultative selling, mini closing and closing.
- Apply team working principles.
- Comply with equity, diversity, and inclusion guidance.
- Communicate with others verbally, for example customers, suppliers, and colleagues.
- Communicate in writing, for example with internal and external customers, colleagues, and managers.
- Use information and digital technology systems. Comply with GDPR and cyber security.
- Complete and record learning and development activities.
- Apply procedures to check and replace fluids, and filtration parts.
Your training plan
Working towards completing Level 2 Autocare Technician Apprenticeship Standard. Work based learning with attendance at Hertford Regional College one day per week.
Requirements
Essential qualifications
GCSE in:
- English (grade 1-9)
- Maths (grade 1-9)
Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.
Skills
- Communication skills
- Organisation skills
- Customer care skills
- Team working
- Patience
- Adaptability
- Motivated
- Enthusiastic
- Punctual
Other requirements
Early starts. Possibly helping others with workload to maintain a healthy flow of progress in workshop. Good standard of reading and writing to complete service sheets and job cards.
About this company
Servicing, repairs, MOT’s & diagnostics of vehicles. We are a modest sized mechanics with a relatively small number of staff. We are located in the centre of Cheshunt with easy travel access. We are a family run business with regular and local customers.
After this apprenticeship
There will be opportunities for progression and a permanent position subject to performance.
Ask a question
The contact for this apprenticeship is:
HERTFORD REGIONAL COLLEGE
The Apprenticeship Team
apprenticeship@hrc.ac.uk
01992411572
The reference code for this apprenticeship is VAC1000309288.
Apply now
Closes in 8 days (Friday 9 May 2025 at 11:59pm)
When you apply, you’ll be asked to sign in with a GOV.UK One Login. You can create one at the same time as applying for this apprenticeship.