Plumbing Heating Gas Apprenticeship

Summary

Whether you are brand new to the industry or have some experience, we can provide all the training required to transform you into a well-respected and highly skilled plumbing & heating engineer. You will work on general plumbing repairs & maintenance and central heating servicing & installation.

Wage

£17,667 for your first year, then could increase depending on your age

National Minimum Wage rate for apprentices

Check minimum wage rates (opens in new tab)

Training course

Plumbing and domestic heating technician (level 3)

Hours

Monday to Friday, between 8.00am and 5.00pm.

45 hours a week

Start date

Thursday 2 October 2025

Duration

2 years

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

We are open to all ages so if you think you have what it takes to become part of the team at Shropshire's leading businesses then apply today.

4 days per week hands-on experience working within customers’ homes learning: Plumbing, Heating, Gas, Oil & LPG
General plumbing repairs & maintenance
Central heating servicing & installation
Boiler servicing & installation
Bathrooms & kitchen installation

Where you'll work

211 MOUNT PLEASANT ROAD
SHREWSBURY
SY1 3JA

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

College or training organisation

SOUTH STAFFORDSHIRE COLLEGE

Your training course

Plumbing and domestic heating technician (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents

Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
Plan tasks within plumbing and domestic heating systems industry.
Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
Decommission plumbing and domestic heating systems.
Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.
Carry out and apply the common installation processes and techniques used in the installation and maintenance of natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input) in the workplace.
Install, purge, test, commission and handover low pressure natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input).
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
Decommission (including disconnection and dismantling) low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
Plan, size and select low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
Carry out and apply the common processes and techniques used in the installation of air source heat pump (non-refrigerant circuits) systems.
Carry out and apply the common processes and techniques used in the installation of solar thermal systems.
Test, commission and handover air source heat pump (non-refrigerant circuits) systems.
Test, commission and handover solar thermal systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on air source heat pump (non-refrigerant circuits) systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on solar thermal systems.
Decommission (including disconnection and dismantling) air source heat pump (non-refrigerant circuits) systems.
Decommission (including disconnection and dismantling) solar thermal systems.
Plan, size and select air source heat pump (non-refrigerant circuits) systems.
Plan, size and select solar thermal systems.
Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing pipework.
Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing systems and appliances (cold water systems, hot water systems, sanitary appliances and pipework systems and rainwater systems).
Test, commission and handover plumbing pipework (above 28mm) and non-domestic plumbing systems and appliances in the workplace. (cold water systems and sanitary appliances and pipework systems).
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on plumbing (above 28mm) and non-domestic plumbing systems and appliances.
Decommission (including disconnection and dismantling) plumbing (above 28mm) and non-domestic plumbing systems and appliances.
Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
Plan tasks within plumbing and domestic heating systems industry.
Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
Decommission plumbing and domestic heating systems.
Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.

Your training plan

1 day per week at college undertaking a Level 3 Plumbing & Heating qualification
Within 2 years you will be a fully qualified plumber
Progression once qualified would be to continue gaining new qualifications including Gas, LPG & Oil

Requirements

Essential qualifications

GCSE or equivalent in:

English (grade C/5)
Maths (grade C/5)
Science (grade C/5)

Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.

Skills

Communication skills
Attention to detail
Customer care skills
Problem solving skills
Number skills
Creative

About this company

“Shropshire’s Most Reputable Plumbing, Heating & Cooling Engineers With The Fastest Response Time" We cover All Aspects Of Plumbing, Heating, Cooling, Boilers, Gas, Oil, LPG, Heat Pumps & Air Conditioning From A Dripping Tap To a Full Heating System Installation All of our gas boiler installations include a 10 year parts & labour guarantee All of our employees start as an apprentice and are trained one on one with the business owner George Whitfield.

http://www.WhitfieldPlumbing.co.uk (opens in new tab)

After this apprenticeship

If you work hard and dedicate yourself 100% to completing your apprenticeship, we will offer you a full-time employed job, company van & the opportunity to possibly train your own apprentice.

Typical salary for an employee with 5 years’ experience at Whitfield's would earn £40,000 - £50,000 per year.

Ask a question

The contact for this apprenticeship is:

Whitfield Plumbing & Heating

George Whitfield

Info@WhitfieldPlumbing.co.uk

07946 871330

The reference code for this apprenticeship is VAC1000330874.

Apply now

Closes on Wednesday 1 October 2025

When you apply, you’ll be asked to sign in with a GOV.UK One Login. You can create one at the same time as applying for this apprenticeship.

Cookies on Find an apprenticeship

Contents