Fabricator Welder Apprentice
MIDLAND STEEL TRADERS LTD
CO DURHAM (DH3 2SW)
Closes in 17 days (Monday 17 November 2025)
Posted on 30 October 2025
Contents
Summary
We will provide you with the correct skills and experience to further your career with the support you need to perform to your full potential. You will learn MIG welding, fabrication, hand held plasma cutting and oxy cutting and gouging, how to read engineering drawings. BTec Level 3 and practical training will take place at TDR in Longbenton.
- Wage
-
£14,526.20 for your first year, then could increase depending on your age
National Minimum Wage rate for apprentices
- Training course
- Metal fabricator (level 3)
- Hours
-
Monday - Friday, between 9.00am - 5.00pm.
37 hours a week
- Start date
-
Monday 24 November 2025
- Duration
-
4 years
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
We are looking to recruit a welding and fabrication apprentice. This is an exciting opportunity for an individual with a "can do" attitude looking to join a successful, progressive company who is a leading manufacturer of buckets, quick couplers, and other earth-moving attachments.
To be successful, you will need to demonstrate a commitment to working as part of a team and have a flexible, logical, and analytical approach to problem solving.
You must be punctual, reliable and have a keen willingness to learn.
The role:
We will provide you with the right skills and experiences to further your career with the support you need to perform to your full potential.
You will learn:
- MIG Welding
- Fabrication
- Use of hand held plasma cutting and oxy/propane cutting and gouging
- How to read engineering drawings
Where you'll work
NORTRACK WORKS SHADON WAY
PORTOBELLO INDUSTRIAL EST
BIRTLEY
CO DURHAM
DH3 2SW
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
TDR TRAINING LIMITED
Training course
Metal fabricator (level 3)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Work safely at all times, comply with health & safety legislation, regulations and organisational requirements.
- Comply with environmental legislation, regulations and organisational requirements.
- Obtain, check and use the appropriate documentation (such as job instructions, drawings, quality control documentation).
- Carry out relevant planning and preparation activities before commencing work activity.
- Undertake the work activity using the correct processes, procedures and equipment.
- Carry out the required checks (such as quality, compliance or testing) using the correct procedures, processes and/or equipment.
- Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
- Complete any required documentation using the defined recording systems at the appropriate stages of the work activity.
- Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
- Identify and follow correct Metal work instructions, specifications, drawing etc.
- Mark out using appropriate tools and techniques.
- Cut and form Metal for the production or maintenance of fabricated products.
- Produce and assemble Metal products to required specification and quality requirements.
- Identify and follow correct joining instructions, specifications, drawing etc.
- Carry out the relevant preparation before starting the joining fabrication activity.
- Set up, check, adjust and use joining and related equipment.
- Weld joints in accordance with approved welding procedures and quality requirements.
- Work safely at all times, comply with health & safety legislation, regulations and organisational requirements.
- Comply with environmental legislation, regulations and organisational requirements.
- Obtain, check and use the appropriate documentation (such as job instructions, drawings, quality control documentation).
- Carry out relevant planning and preparation activities before commencing work activity.
- Undertake the work activity using the correct processes, procedures and equipment.
- Carry out the required checks (such as quality, compliance or testing) using the correct procedures, processes and/or equipment.
- Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
- Complete any required documentation using the defined recording systems at the appropriate stages of the work activity.
- Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
- Identify and follow correct Metal work instructions, specifications, drawing etc.
- Mark out using appropriate tools and techniques.
- Cut and form Metal for the production or maintenance of fabricated products.
- Produce and assemble Metal products to required specification and quality requirements.
- Identify and follow correct joining instructions, specifications, drawing etc.
- Carry out the relevant preparation before starting the joining fabrication activity.
- Set up, check, adjust and use joining and related equipment.
- Weld joints in accordance with approved welding procedures and quality requirements.
Training schedule
Metal Fabricator Level 3 Apprenticeship Standard:
- You will work towards a metal fabricator standard and will sit end point assessment
- Initial training will be at TDR training in Longbenton for 10 weeks
- Training will take place in the workplace
Requirements
Essential qualifications
GCSE in:
- English Language or English Literature (grade 4)
- Maths (grade 4)
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Communication skills
- IT skills
- Attention to detail
- Problem solving skills
- Administrative skills
About this employer
MST is a market leader in the supply of earthmoving machinery, spare parts, service and repair. With over 50 years in the industry, we offer our customers extensive knowledge and experience, ensuring the correct parts are supplied to match the machine’s application. Based in Birtley.
After this apprenticeship
- Full-time position may be available to the right candidate upon completion of apprenticeship
Ask a question
The contact for this apprenticeship is:
TDR TRAINING LIMITED
The reference code for this apprenticeship is VAC1000348955.
Apply now
Closes in 17 days (Monday 17 November 2025)
Sign in with your GOV.UK One Login to apply.
After signing in, you’ll apply for this apprenticeship on the company's website.