Kia Light Vehicle Technician Apprentice - Brentford
Norton Way Motors Ltd
Brentford (TW8 9FX)
Closes on Friday 31 October 2025
Posted on 19 September 2025
Contents
Summary
All Kia Apprenticeships are nationally recognised. In addition, apprentices will be provided with the opportunity to achieve additional recognised qualifications that support apprentices' career development, allowing them to be a recognised and accredited Kia Dealer employee! With industry-leading pass rates, now is a great time to join our network!
- Wage
-
£15,704 for your first year, then could increase depending on your age
National Minimum Wage rate for apprentices
- Training course
- Autocare technician (level 2)
- Hours
-
Apprentices will be expected to work Monday–Friday, shifts to be confirmed (with the exception of weekends as per the requirements of the dealership).
40 hours a week
- Start date
-
Monday 3 November 2025
- Duration
-
3 years
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
The Kia Light Vehicle Technician Apprenticeship programme will support the apprentice to gain the knowledge and skills needed to become a fully qualified and accredited Kia vehicle technician, qualifying them to be responsible for:
- Servicing vehicles
- Repairing and replacing faulty parts and components
- Advising the Service Advisor about faults and required repairs
- Contact with customers about work required
- Diagnosing and repairing complex vehicle faults
Where you'll work
963 Great West Road
Brentford
TW8 9FX
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
SKILLNET LIMITED
Training course
Autocare technician (level 2)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Comply with health and safety procedures in the workplace in compliance with regulations, standards, and guidance.
- Prepare the vehicle and working area before the work activity. For example, remove or mitigate slip and trip hazards.
- Maintain and restore the work area during and on completion of the activity.
- Store, maintain, including calibration checks, and return tools and equipment to storage.
- Access vehicle technical data to inform inspections and make judgements on wear and serviceability.
- Comply with environmental and sustainability procedures, regulations, standards, and guidance. Segregate resources for reuse, recycling, and disposal.
- Apply vehicle safety inspection and routine maintenance procedures using vehicle specific data on car, car derived van or light goods vehicle.
- Select and use tools and equipment, mechanical and electrical measuring tools, and diagnostic equipment.
- Remove and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
- Remove, repair and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
- Inspect, remove, and replace of parts or components in cars, car derived vans, or light goods vehicles for the following: steering systems and suspension systems, braking systems, emission systems, air conditioning systems, battery and charging systems, fluid and filtration systems.
- Apply state-of-health condition monitoring tests to high voltage batteries and chargers for electrified cars, car derived vans, or light goods vehicles.
- Apply four-wheel geometry checks and adjustments to cars, car derived vans, and light goods vehicles.
- Apply safe working practices and procedures to isolate electrified vehicles for maintenance.
- Record vehicle service maintenance, parts replacement, or repair.
- Apply customer service principles and organisational customer care practices. For example, identifying customer and vehicle needs, resolve low level customer complaints, make recommendations to customers based on results of inspection, maintenance, or repair of vehicles, customer payment transactions and organisational sales processes.
- Provide quotation of cost and order automotive parts, products, and consumables applicable to the vehicle.
- Apply procedures for stock and parts storage: ordering, checking and stock rotation.
- Apply organisational sales processes. For example, show and tell, features and benefits, consultative selling, mini closing and closing.
- Apply team working principles.
- Comply with equity, diversity, and inclusion guidance.
- Communicate with others verbally, for example customers, suppliers, and colleagues.
- Communicate in writing, for example with internal and external customers, colleagues, and managers.
- Use information and digital technology systems. Comply with GDPR and cyber security.
- Complete and record learning and development activities.
- Apply procedures to check and replace fluids, and filtration parts.
- Comply with health and safety procedures in the workplace in compliance with regulations, standards, and guidance.
- Prepare the vehicle and working area before the work activity. For example, remove or mitigate slip and trip hazards.
- Maintain and restore the work area during and on completion of the activity.
- Store, maintain, including calibration checks, and return tools and equipment to storage.
- Access vehicle technical data to inform inspections and make judgements on wear and serviceability.
- Comply with environmental and sustainability procedures, regulations, standards, and guidance. Segregate resources for reuse, recycling, and disposal.
- Apply vehicle safety inspection and routine maintenance procedures using vehicle specific data on car, car derived van or light goods vehicle.
- Select and use tools and equipment, mechanical and electrical measuring tools, and diagnostic equipment.
- Remove and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
- Remove, repair and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
- Inspect, remove, and replace of parts or components in cars, car derived vans, or light goods vehicles for the following: steering systems and suspension systems, braking systems, emission systems, air conditioning systems, battery and charging systems, fluid and filtration systems.
- Apply state-of-health condition monitoring tests to high voltage batteries and chargers for electrified cars, car derived vans, or light goods vehicles.
- Apply four-wheel geometry checks and adjustments to cars, car derived vans, and light goods vehicles.
- Apply safe working practices and procedures to isolate electrified vehicles for maintenance.
- Record vehicle service maintenance, parts replacement, or repair.
- Apply customer service principles and organisational customer care practices. For example, identifying customer and vehicle needs, resolve low level customer complaints, make recommendations to customers based on results of inspection, maintenance, or repair of vehicles, customer payment transactions and organisational sales processes.
- Provide quotation of cost and order automotive parts, products, and consumables applicable to the vehicle.
- Apply procedures for stock and parts storage: ordering, checking and stock rotation.
- Apply organisational sales processes. For example, show and tell, features and benefits, consultative selling, mini closing and closing.
- Apply team working principles.
- Comply with equity, diversity, and inclusion guidance.
- Communicate with others verbally, for example customers, suppliers, and colleagues.
- Communicate in writing, for example with internal and external customers, colleagues, and managers.
- Use information and digital technology systems. Comply with GDPR and cyber security.
- Complete and record learning and development activities.
- Apply procedures to check and replace fluids, and filtration parts.
Training schedule
Kia Apprenticeship Programme operates using a 12-week cycle. Within each 12-week period, apprentices will receive the following teaching, learning and assessment:
- One college block attendance with teaching delivered by dedicated Tutors (both via Virtual Classroom Training and face-to-face at the Kia Academy in Derby)
- One workplace visit face to face with their dedicated Skills Coach
- One tripartite progress review involving the Apprentice, Skills Coach and their workplace mentor
- One 1:1 teaching session with their dedicated Skills Coach via virtual classroom
More training information
- The Kia Academy in Derby is state-of-the-art with the latest diagnostic equipment and has been purposely built to accommodate Kia Apprenticeship and Adult Training across the network
- Apprentices will attend the Kia Academy for Block Training Weeks (Monday-Thursday) every 8-10 weeks. Hotel accommodation is provided for apprentices travelling if required, which is funded by the employer. Therefore, it is at no cost to the apprentice
Requirements
Desirable qualifications
GCSE in:
- English (grade 4 or C and above)
- Maths (grade 4 or C and above)
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Communication skills
- Attention to detail
- Organisation skills
- Customer care skills
- Problem solving skills
- Logical
- Team working
- Initiative
Other requirements
The Light Vehicle Progression Pathway for the Kia Apprenticeships means that apprentices will undertake their Level 2 Autocare Standard (if not already achieved) and will then be automatically enroled onto the Level 3 Light Vehicle Standard. Giving apprentices the opportunity to qualify for basic servicing sooner!
About this employer
At Norton Way our policy is to have a diverse and flexible workforce which reflects our customers and potential customer's requirements. Being based in the retail industry we are continually striving to meet and exceed customer expectations. This is why we aim through our workforce to employ and train every employee to achieve and deliver customer excellence in everything we do.
After this apprenticeship
- Upon completion of the Kia Technician Apprenticeship, apprentices have the opportunity to transition into Senior Technician, Master Technician, EV Specialist, and Service/Aftersales Manager roles
- Kia is committed to growing the automotive talent pool with Electric Vehicle Specialists
Ask a question
The contact for this apprenticeship is:
SKILLNET LIMITED
recruitment@skillnet.org.uk
The reference code for this apprenticeship is VAC1000342993.
Apply now
Closes on Friday 31 October 2025
Sign in with your GOV.UK One Login to apply.