Apprentice Plumber

MILLER FREEMAN & SONS (NOTTINGHAM) LTD

NOTTINGHAM (NG5 6BG)

Closes in 29 days (Monday 18 August 2025 at 11:59pm)

Posted on 16 July 2025

Print

Contents

Summary

Miller Freeman & Sons (Nottingham) Ltd are providing an exciting opportunity for an apprentice to progress their career with them as a Plumbing Level 3 Apprentice. Gain in-depth knowledge and hands-on experience in complex plumbing systems while earning and learning on the job.

Wage

£15,704 for your first year, then could increase depending on your age

National Minimum Wage rate for apprentices

Check minimum wage rates (opens in new tab)

Training course
Plumbing and domestic heating technician (level 3)
Hours
Exact shifts to be confirmed, depending on location. Typical working week is Monday - Friday 7am - 3pm

40 hours a week

Start date

Tuesday 19 August 2025

Duration

4 years

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

Where you'll work

4 PARKYN ROAD
DAYBROOK
NOTTINGHAM
NG5 6BG

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

NOTTINGHAM COLLEGE

Training course

Plumbing and domestic heating technician (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
  • Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
  • Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
  • Plan tasks within plumbing and domestic heating systems industry.
  • Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
  • Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
  • Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
  • Decommission plumbing and domestic heating systems.
  • Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
  • Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
  • Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.
  • Carry out and apply the common installation processes and techniques used in the installation and maintenance of natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input) in the workplace.
  • Install, purge, test, commission and handover low pressure natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input).
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
  • Decommission (including disconnection and dismantling) low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
  • Plan, size and select low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
  • Carry out and apply the common processes and techniques used in the installation of air source heat pump (non-refrigerant circuits) systems.
  • Carry out and apply the common processes and techniques used in the installation of solar thermal systems.
  • Test, commission and handover air source heat pump (non-refrigerant circuits) systems.
  • Test, commission and handover solar thermal systems.
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on air source heat pump (non-refrigerant circuits) systems.
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on solar thermal systems.
  • Decommission (including disconnection and dismantling) air source heat pump (non-refrigerant circuits) systems.
  • Decommission (including disconnection and dismantling) solar thermal systems.
  • Plan, size and select air source heat pump (non-refrigerant circuits) systems.
  • Plan, size and select solar thermal systems.
  • Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing pipework.
  • Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing systems and appliances (cold water systems, hot water systems, sanitary appliances and pipework systems and rainwater systems).
  • Test, commission and handover plumbing pipework (above 28mm) and non-domestic plumbing systems and appliances in the workplace. (cold water systems and sanitary appliances and pipework systems).
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on plumbing (above 28mm) and non-domestic plumbing systems and appliances.
  • Decommission (including disconnection and dismantling) plumbing (above 28mm) and non-domestic plumbing systems and appliances.
  • Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
  • Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
  • Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
  • Plan tasks within plumbing and domestic heating systems industry.
  • Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
  • Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
  • Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
  • Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
  • Decommission plumbing and domestic heating systems.
  • Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
  • Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
  • Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.

Training schedule

This training schedule has not been finalised. Check with this employer if you’ll need to travel to a college or training location for this apprenticeship.

Requirements

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

About this employer

Miller Freeman & Sons (Nottingham) Ltd is a well-established, family-run business with a strong reputation for quality workmanship and reliability in the plumbing and heating sector. Based in Nottingham, we specialise in domestic and light commercial projects, offering a full range of plumbing, heating, and maintenance services. With decades of experience, our team is committed to developing the next generation of skilled tradespeople. We provide hands-on training, mentorship, and real-world experience in a supportive environment, ensuring our apprentices gain the confidence and technical skills needed for a successful career in the plumbing industry.

https://www.millerfreeman.org/ (opens in new tab)

After this apprenticeship

Ask a question

The contact for this apprenticeship is:

NOTTINGHAM COLLEGE

Nottingham College Apprenticeship Team

business@nottinghamcollege.ac.uk

0115 9457260

The reference code for this apprenticeship is VAC1000331985.

Apply now

Closes in 29 days (Monday 18 August 2025 at 11:59pm)

Sign in with your GOV.UK One Login to apply.