Maintenance Machinist Apprentice

Summary

To learn the following aspects of machining: Milling, turning, drilling, and surface grinding, to support maintenance, manufacturing engineering, and office-based engineers.

Wage

£24,884 a year

Check minimum wage rates (opens in new tab)

Training course

Machining technician (level 3)

Hours

Mon to Thu 7:45 to 17:00 and Fri 7:45 to 12:45

39 hours a week

Start date

Monday 1 September 2025

Duration

3 years 6 months

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

Working with the Maintenance Machinist on a wide range of machining projects, from machine repairs to new tooling
Carrying out risk assessments
Use barcode readers
Look after maintenance machinery by carrying out routine cleaning and inspections
Work with the manufacturing engineer to produce tool blanks
Work with the office engineering department to produce 1 off samples and test, and develop fittings
Dealing with contractors

Where you'll work

EAST PORTWAY
ANDOVER
HAMPSHIRE
SP10 3LH

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

College or training organisation

BASINGSTOKE COLLEGE OF TECHNOLOGY

Your training course

Machining technician (level 3)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents

Comply with statutory health and safety regulations and procedures.
Comply with environmental, ethical and sustainability regulations and procedures: safe disposal of waste, re-cycling or re-use of materials and efficient use of resources.
Prepare and set up conventional or CNC machines.
Operate and adjust conventional or CNC machines.
Apply risk assessment and hazard identification processes and procedures in the work area.
Monitor, obtain and check stock and supplies, and complete stock returns.
Record information - paper based or electronic. For example, energy usage, job sheets, risk assessments, equipment service records, test results, handover documents and manufacturers' documentation, asset management records, work sheets, checklists, waste environmental records and any legal reporting requirements.
Read and interpret information. For example, data and documentation used to produce machined components.
Apply engineering, mathematical and scientific principles.
Plan and organise own work and resources.
Follow and apply inspection, quality assurance procedures and processes.
Select machining process.
Select and setup tooling and work holding devices.
Set and adjust machine operating parameters. For example, setting feeds and speeds for roughing and finishing operations, loading, proving and validating programs when using a CNC machine tool.
Apply machining operations and techniques to produce complex components with features. For example, parallel; stepped; angular diameters and faces; grooves; slots; recesses and undercuts; radii and chamfers; internal and external forms and profiles; reamed; bored; drilled and electro eroded holes; internal and external screw threads.
Measure and check components.
Select and check condition of tools and equipment. Identify issues, resolve and take action as needed.
Identify and action issues in the manufacturing process.
Apply fault-finding and diagnostic testing procedures to identify faults. Diagnose and resolve issues. Escalate issues.
Maintain the work area and return any resources and consumables.
Communicate with others verbally. For example, colleagues and stakeholders.
Follow machine shut down, safe isolation, handover, start up or warm up procedures. Escalate issues.
Apply continuous improvement techniques. Devise suggestions for improvement.
Apply ethical principles.
Apply team working principles.
Comply with statutory health and safety regulations and procedures.
Comply with environmental, ethical and sustainability regulations and procedures: safe disposal of waste, re-cycling or re-use of materials and efficient use of resources.
Prepare and set up conventional or CNC machines.
Operate and adjust conventional or CNC machines.
Apply risk assessment and hazard identification processes and procedures in the work area.
Monitor, obtain and check stock and supplies, and complete stock returns.
Record information - paper based or electronic. For example, energy usage, job sheets, risk assessments, equipment service records, test results, handover documents and manufacturers' documentation, asset management records, work sheets, checklists, waste environmental records and any legal reporting requirements.
Read and interpret information. For example, data and documentation used to produce machined components.
Apply engineering, mathematical and scientific principles.
Plan and organise own work and resources.
Follow and apply inspection, quality assurance procedures and processes.
Select machining process.
Select and setup tooling and work holding devices.
Set and adjust machine operating parameters. For example, setting feeds and speeds for roughing and finishing operations, loading, proving and validating programs when using a CNC machine tool.
Apply machining operations and techniques to produce complex components with features. For example, parallel; stepped; angular diameters and faces; grooves; slots; recesses and undercuts; radii and chamfers; internal and external forms and profiles; reamed; bored; drilled and electro eroded holes; internal and external screw threads.
Measure and check components.
Select and check condition of tools and equipment. Identify issues, resolve and take action as needed.
Identify and action issues in the manufacturing process.
Apply fault-finding and diagnostic testing procedures to identify faults. Diagnose and resolve issues. Escalate issues.
Maintain the work area and return any resources and consumables.
Communicate with others verbally. For example, colleagues and stakeholders.
Follow machine shut down, safe isolation, handover, start up or warm up procedures. Escalate issues.
Apply continuous improvement techniques. Devise suggestions for improvement.
Apply ethical principles.
Apply team working principles.

Your training plan

Training will take place 1 day a week at Basingstoke College of Technology, with the rest of the week at the employer's site.

Requirements

Essential qualifications

GCSE in:

English (grade 5 (B) or above)
maths (grade 5 (B) or above)
Science (grade 5 (B) or above)

Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.

Skills

Communication skills
IT skills
Attention to detail
Organisation skills
Customer care skills
Presentation skills
Administrative skills
Logical
Team working
Initiative
Physical fitness
Reliable
Positive attitude

About this company

Through wide-ranging manufacturing capabilities, we serve the communications, energy, special industries, and solar markets with connections you can count on.

After this apprenticeship

The course offers progression to the HNC and is a recognised means of career progression within the engineering industry.

Ask a question

The contact for this apprenticeship is: