Mechanic Apprentice

AUTOMERC SERVICE LTD

LONDON (N22 6US)

Closes in 19 days (Sunday 3 August 2025 at 11:59pm)

Posted on 14 July 2025


Summary

A motor vehicle technician is a highly skilled worker. During your apprenticeship you will be taught about all areas of vehicle service, repair and maintenance. This is a fantastic opportunity for the right candidate to earn a salary and gain a level 2 qualification.

Wage

£15,704 for your first year, then could increase depending on your age

National Minimum Wage rate for apprentices

Check minimum wage rates (opens in new tab)

Training course
Autocare technician (level 2)
Hours
Monday to Friday- Times to be confirmed Possible weekend work 40 Hours a week

40 hours a week

Start date

Monday 4 August 2025

Duration

1 year 6 months

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

  • Servicing vehicles- Working on manufacturer servicing guidelines to ensure the vehicle is running at optimum performance
  • Maintenance- Replacing parts and components before they fail
  • Repair- Repairing problems that cause vehicle failure

Where you'll work

83-89 WESTERN ROAD
WOOD GREEN
LONDON
N22 6US

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

College or training organisation

NORTH LONDON GARAGES GTA

Your training course

Autocare technician (level 2)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Comply with health and safety procedures in the workplace in compliance with regulations, standards, and guidance.
  • Prepare the vehicle and working area before the work activity. For example, remove or mitigate slip and trip hazards.
  • Maintain and restore the work area during and on completion of the activity.
  • Store, maintain, including calibration checks, and return tools and equipment to storage.
  • Access vehicle technical data to inform inspections and make judgements on wear and serviceability.
  • Comply with environmental and sustainability procedures, regulations, standards, and guidance. Segregate resources for reuse, recycling, and disposal.
  • Apply vehicle safety inspection and routine maintenance procedures using vehicle specific data on car, car derived van or light goods vehicle.
  • Select and use tools and equipment, mechanical and electrical measuring tools, and diagnostic equipment.
  • Remove and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
  • Remove, repair and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
  • Inspect, remove, and replace of parts or components in cars, car derived vans, or light goods vehicles for the following: steering systems and suspension systems, braking systems, emission systems, air conditioning systems, battery and charging systems, fluid and filtration systems.
  • Apply state-of-health condition monitoring tests to high voltage batteries and chargers for electrified cars, car derived vans, or light goods vehicles.
  • Apply four-wheel geometry checks and adjustments to cars, car derived vans, and light goods vehicles.
  • Apply safe working practices and procedures to isolate electrified vehicles for maintenance.
  • Record vehicle service maintenance, parts replacement, or repair.
  • Apply customer service principles and organisational customer care practices. For example, identifying customer and vehicle needs, resolve low level customer complaints, make recommendations to customers based on results of inspection, maintenance, or repair of vehicles, customer payment transactions and organisational sales processes.
  • Provide quotation of cost and order automotive parts, products, and consumables applicable to the vehicle.
  • Apply procedures for stock and parts storage: ordering, checking and stock rotation.
  • Apply organisational sales processes. For example, show and tell, features and benefits, consultative selling, mini closing and closing.
  • Apply team working principles.
  • Comply with equity, diversity, and inclusion guidance.
  • Communicate with others verbally, for example customers, suppliers, and colleagues.
  • Communicate in writing, for example with internal and external customers, colleagues, and managers.
  • Use information and digital technology systems. Comply with GDPR and cyber security.
  • Complete and record learning and development activities.
  • Apply procedures to check and replace fluids, and filtration parts.
  • Comply with health and safety procedures in the workplace in compliance with regulations, standards, and guidance.
  • Prepare the vehicle and working area before the work activity. For example, remove or mitigate slip and trip hazards.
  • Maintain and restore the work area during and on completion of the activity.
  • Store, maintain, including calibration checks, and return tools and equipment to storage.
  • Access vehicle technical data to inform inspections and make judgements on wear and serviceability.
  • Comply with environmental and sustainability procedures, regulations, standards, and guidance. Segregate resources for reuse, recycling, and disposal.
  • Apply vehicle safety inspection and routine maintenance procedures using vehicle specific data on car, car derived van or light goods vehicle.
  • Select and use tools and equipment, mechanical and electrical measuring tools, and diagnostic equipment.
  • Remove and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
  • Remove, repair and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
  • Inspect, remove, and replace of parts or components in cars, car derived vans, or light goods vehicles for the following: steering systems and suspension systems, braking systems, emission systems, air conditioning systems, battery and charging systems, fluid and filtration systems.
  • Apply state-of-health condition monitoring tests to high voltage batteries and chargers for electrified cars, car derived vans, or light goods vehicles.
  • Apply four-wheel geometry checks and adjustments to cars, car derived vans, and light goods vehicles.
  • Apply safe working practices and procedures to isolate electrified vehicles for maintenance.
  • Record vehicle service maintenance, parts replacement, or repair.
  • Apply customer service principles and organisational customer care practices. For example, identifying customer and vehicle needs, resolve low level customer complaints, make recommendations to customers based on results of inspection, maintenance, or repair of vehicles, customer payment transactions and organisational sales processes.
  • Provide quotation of cost and order automotive parts, products, and consumables applicable to the vehicle.
  • Apply procedures for stock and parts storage: ordering, checking and stock rotation.
  • Apply organisational sales processes. For example, show and tell, features and benefits, consultative selling, mini closing and closing.
  • Apply team working principles.
  • Comply with equity, diversity, and inclusion guidance.
  • Communicate with others verbally, for example customers, suppliers, and colleagues.
  • Communicate in writing, for example with internal and external customers, colleagues, and managers.
  • Use information and digital technology systems. Comply with GDPR and cyber security.
  • Complete and record learning and development activities.
  • Apply procedures to check and replace fluids, and filtration parts.

Your training plan

  • An apprenticeship includes regular training with a college or other training organisation
  • At least 20% of your working hours will be spent training or studying

More training information

Level 2 Autocare Technician qualification

Successful candidates will have full time employment with training in a garage and day release at one of our training centres or other approved college to work towards achieving Level 2 qualification (over 18-months).

You will shadow qualified technicians at work so that you are able to learn first-hand how to service, maintain and repair vehicles.

As you progress through the course and your confidence and experience grows, you will be able to start completing tasks on your own.

One of our assessors will visit you in your workplace to mentor you and assess your competence regularly. This is part of our close support network NLG provides to ensure that apprentices are both enjoying and succeeding in their course.

North London Garages have rolling college courses which start approximately every 3-months. To apply, you must be able to travel to college once a week.

On completion of this Standard the Auto-care Technician will be eligible to apply for IMI membership as a Registered Young Professional or if they wish as an Associate Member. They would also gain entry onto the IMI Professional Register.

Functional Skills in maths and English, if needed.

Requirements

Desirable qualifications

GCSE in:

Maths and English or equivalent (grade 4)

Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.

Skills

  • Communication skills
  • Attention to detail
  • Organisation skills
  • Customer care skills
  • Problem solving skills
  • Logical
  • Team working
  • Initiative
  • Non judgemental
  • Patience

About this company

AUTOMERC SERVICE Ltd is one of North London's longest established specialists in the repair, servicing and maintenance of Mercedes-Benz and BMW vehicles.

http://automerc.co.uk/ (opens in new tab)

After this apprenticeship

Following the completion of your Intermediate Apprenticeship (18- months), we recommend that you continue onto an advanced apprenticeship (12-months) to become a fully qualified Light Vehicle Technician. There are then a number of opportunities for progression within the Motor Industry including (but not limited to): MOT Tester, Senior Technician or Workshop Manager.

Ask a question

The contact for this apprenticeship is:

NORTH LONDON GARAGES GTA

David

recruitment@nlggta.co.uk

02088056967

The reference code for this apprenticeship is VAC1000331545.

Apply now

Closes in 19 days (Sunday 3 August 2025 at 11:59pm)

When you apply, you’ll be asked to sign in with a GOV.UK One Login. You can create one at the same time as applying for this apprenticeship.