Drylining Apprentice

MILLEN DRYWALL LTD

TORQUAY (TQ1 4PR)

Closes in 10 days (Monday 23 June 2025 at 11:59pm)

Posted on 10 June 2025

Print

Contents

Summary

Offering an opportunity to be a Drylining Apprentice, you should apply if you want a long-term career as a dry liner.

Wage

£15,704 to £25,396.80, depending on your age

National Minimum Wage

Check minimum wage rates (opens in new tab)

Training course
Interior systems installer (level 2)
Hours
Monday - Friday 8am - 5pm.

40 hours a week

Start date

Wednesday 2 July 2025

Duration

2 years 3 months

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

  • Measuring and marking out wall positions
  • Installing a metal stud or timber framework to support plasterboard
  • Fixing boards to walls, ceilings, or partitions using screws or adhesive (dot and dab)
  • Fitting fire-resistant boards as required by building regulations.
  • Keeping work areas tidy and disposing of waste
  • Following health and safety procedures (e.g., correct PPE, manual handling)

Where you'll work

2 THE OLD BANK CHAMBERS
FORE STREET
ST MARYCHURCH
TORQUAY
TQ1 4PR

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

College or training organisation

GREENLIGHT TRAINING LIMITED

Your training course

Interior systems installer (level 2)

Understanding apprenticeship levels (opens in new tab)

What you'll learn

Course contents
  • Measure and set out from drawings provided and check vertical and horizontal datum
  • Select the appropriate materials, tools and equipment in accordance with the specification requirements and or manufacturer specific instructions
  • Safely and correctly operate tools and equipment, plant and machinery appropriate for use. (e.g. scaffold, MEWPS, nail gun, circular saw, lasers
  • Apply fire and acoustic mastic seals in accordance with specification, designs details and manufacturers recommendations
  • Accurately measure and cut components (e.g. metal sections, plasterboard, insulation, timber and plywood)
  • Appropriately fix all components according to specifications and/or drawings
  • Effectively protect surround surfaces and segregate work areas and cutting areas
  • Install dry lining systems to metal and stud partitions framed wall linings, framed and frameless beam and column encasements
  • Clearly communicate with management, customers and colleagues including other trades onsite
  • Maintain a clean and tidy environment, appropriately disposing of waste according to site procedures
  • Identify and select appropriate PPE for the task
  • Install pattresses
  • Install insulation
  • Form service penetrations through partitions
  • Install primary channels or main runners to line and level. Cut to length
  • Frame and fit access panels
  • install drylining and plasterboard linings eg panels, plasterboards, metal sections, timber battens, wallboards, thermal boards, glass reinforced gypsum board, fixings and fittings
  • Select the appropriate materials, tools and equipment for installing drylining and plasterboard linings
  • Install and remove drylining systems according to manufacturers guidelines eg British Gypsum, Knauf, Siniat
  • Form openings and junctions in accordance with drawing specifications
  • Carry out repairs to dry lining and plasterboard walls and ceilings in accordance with design details, specification and manufacturers recommendations
  • Form and Fix standard deflection heads in accordance with manufactures standard details
  • Accurately measure and cut components
  • Appropriately fix all components according to specification/drawings.
  • Install different types of drylining systems eg Twin walls, Staggered studs, Service shaft partitions, Curved walls, Walls over 3 metres high
  • Cut and fix tracks at appropriate centres according to Specification & manufactures instructions
  • Apply wall coverings according to Specification & manufactures instructions
  • Install door and window frames in accordance with drawings.
  • Fit cover trims and skirtings in accordance with Specification & manufactures instructions
  • Install glazing, blinds and manifestations to meet customer requirements
  • Hang door leaf complete with ironmongery including cutting and fitting of door furniture (eg hinges, levers, locks, closers and signage).
  • Cut and fix hangers in accordance with specification, manufacturers recommendations and FIS best practice guidlines
  • Install ceiling perimeter trim to level. Ensure trims are cut to length and form internal and external corner mitres.
  • Install subgrid eg hangers and heavy gauge channel to bridge services, heavy gauge channel between roof purlins
  • Fix secondary grid / cross tees ensuring grid is square and following manufacturers recommended installation. Form upstand using cross tee and appropriate trims or channels
  • Cut and install service tiles and pattresses e.g. form square and circular service cut outs through mineral tiles with plywood pattress or metal tiles and insulation pad
  • Complete tiling including: Perimeter tile cuts to mineral and metal tile; tegular tile edges to mineral tile; perimeter wedges for cut metal tiles; tile clips to back of mineral ceiling tiles; insulation pads to back of metal ceiling
  • Remove sections of ceiling and replace damaged grid & tile
  • Measure and set out from drawings provided and check vertical and horizontal datum
  • Select the appropriate materials, tools and equipment in accordance with the specification requirements and or manufacturer specific instructions
  • Safely and correctly operate tools and equipment, plant and machinery appropriate for use. (e.g. scaffold, MEWPS, nail gun, circular saw, lasers
  • Apply fire and acoustic mastic seals in accordance with specification, designs details and manufacturers recommendations
  • Accurately measure and cut components (e.g. metal sections, plasterboard, insulation, timber and plywood)
  • Appropriately fix all components according to specifications and/or drawings
  • Effectively protect surround surfaces and segregate work areas and cutting areas
  • Install dry lining systems to metal and stud partitions framed wall linings, framed and frameless beam and column encasements
  • Clearly communicate with management, customers and colleagues including other trades onsite
  • Maintain a clean and tidy environment, appropriately disposing of waste according to site procedures
  • Identify and select appropriate PPE for the task
  • Install pattresses
  • Install insulation
  • Form service penetrations through partitions
  • Install primary channels or main runners to line and level. Cut to length
  • Frame and fit access panels

Your training plan

The training will take place on-site and in college for 4 days a month.

Requirements

Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.

Skills

  • Attention to detail
  • Team working
  • Initiative

Other requirements

This role will consist of heavy lifting.

About this company

At Millen Drywall, we pride ourselves on the outstanding service that we provide. We guarantee the delivery of a successful project every time, with a high-quality finish. Working within both the commercial and residential sectors, we have developed an unmatched knowledge of the trade and gained outstanding experience throughout the years.

After this apprenticeship

The employer will offer the right candidate full-time employment once they have completed their apprenticeship. 

Ask a question

The contact for this apprenticeship is:

GREENLIGHT TRAINING LIMITED

Alice

learning@greenlightsc.co.uk

01752 604713

The reference code for this apprenticeship is VAC1000325142.

Apply now

Closes in 10 days (Monday 23 June 2025 at 11:59pm)

When you apply, you’ll be asked to sign in with a GOV.UK One Login. You can create one at the same time as applying for this apprenticeship.