Welding Apprentice
BUXTON AND MCNULTY MECHANICAL SERVICES LTD.
ERITH (DA18 4AJ)
Closes in 17 days (Saturday 7 June 2025 at 11:59pm)
Posted on 20 May 2025
Contents
Summary
Buxton & McNulty can offer a 4-year apprenticeship in the following disciplines: plumbing, pipefitting and welding. Work will entail working alongside a qualified welder and learning your chosen trade.
- Wage
-
£16,881.80 for your first year, then could increase depending on your age
National Minimum Wage rate for apprentices
- Training course
- Welder (level 2)
- Hours
-
Monday to Friday, 7.30am to 4.30pm.
42 hours 30 minutes a week
- Start date
-
Monday 1 September 2025
- Duration
-
2 years
- Positions available
-
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
- Learning the welding trade
- Assisting welders on site adapting practical skills
- Attending college on a regular basis to achieve the qualification
Where you'll work
28 ALDER CLOSE
ERITH
DA18 4AJ
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
College or training organisation
MID-KENT COLLEGE
Your training course
Welder (level 2)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Apply health and safety procedures including the use of personal protective equipment (PPE).
- Collect and use information - text and data. For example, manufacturer's instructions, manuals, job instructions, drawings and quality control documentation.
- Prepare welding materials and work area: sourcing, checking and protecting.
- Prepare welding machines or equipment and safety protection measures, for example, check calibration and maintenance dates, inspection for cable damage.
- Check and use or operate tools and equipment.
- Set, modify and monitor welding controls, for example, current, arc voltage, wire feed speed, gas flow rates, polarity, mechanised tractor units.
- Identify issues and actions required. Escalate issues or concerns.
- Use manual processes and equipment to remove material before and after welding.
- Weld using processes, for example, tungsten inert gas (TIG), plasma arc welding (PAW), manual metal arc (MMA), metal inert or metal active gas (MIG or MAG), flux cored arc welding (FCAW), submerged arc welding (SAW), tractor-mounted metal inert or metal active gas (MIG or MAG), tractor-mounted flux cored arc welding (FCAW), tractor-mounted or orbital tungsten inert gas (TIG), tractor-mounted or orbital plasma arc welding (PAW).
- Adapt welding technique to weld different material groups, for example, carbon steel, low alloy steel (3-7% alloy content), high alloy ferritic or martensitic steel (>7% alloy content), austenitic stainless steel, duplex stainless steels, nickel and nickel alloys, aluminium and aluminium alloys, titanium and titanium alloys, copper and copper alloys.
- Weld materials in different joint configurations, for example, butt, T-butt, fillet, cladding or buttering.
- Adapt welding techniques to weld materials in different positions, for example, down-hand, horizontal-vertical, horizontal, vertical-up, vertical-down, overhead, inclined.
- Identify surface defects.
- Apply visual inspection, dimensional and alignment checks.
- Restore the work area on completion of the welding activity, for example, clean equipment and machinery, tidy the work area, return excess resources and consumables.
- Communicate verbally with others, for example, internal and external customers, colleagues, supervisors and managers.
- Follow procedures in line with environmental and sustainability regulations, standards and guidance. Segregate resources for re-use, recycling and disposal.
- Follow equity, diversity and inclusion procedures.
- Follow work instructions - verbal or written.
- Apply team working principles.
- Apply health and safety procedures including the use of personal protective equipment (PPE).
- Collect and use information - text and data. For example, manufacturer's instructions, manuals, job instructions, drawings and quality control documentation.
- Prepare welding materials and work area: sourcing, checking and protecting.
- Prepare welding machines or equipment and safety protection measures, for example, check calibration and maintenance dates, inspection for cable damage.
- Check and use or operate tools and equipment.
- Set, modify and monitor welding controls, for example, current, arc voltage, wire feed speed, gas flow rates, polarity, mechanised tractor units.
- Identify issues and actions required. Escalate issues or concerns.
- Use manual processes and equipment to remove material before and after welding.
- Weld using processes, for example, tungsten inert gas (TIG), plasma arc welding (PAW), manual metal arc (MMA), metal inert or metal active gas (MIG or MAG), flux cored arc welding (FCAW), submerged arc welding (SAW), tractor-mounted metal inert or metal active gas (MIG or MAG), tractor-mounted flux cored arc welding (FCAW), tractor-mounted or orbital tungsten inert gas (TIG), tractor-mounted or orbital plasma arc welding (PAW).
- Adapt welding technique to weld different material groups, for example, carbon steel, low alloy steel (3-7% alloy content), high alloy ferritic or martensitic steel (>7% alloy content), austenitic stainless steel, duplex stainless steels, nickel and nickel alloys, aluminium and aluminium alloys, titanium and titanium alloys, copper and copper alloys.
- Weld materials in different joint configurations, for example, butt, T-butt, fillet, cladding or buttering.
- Adapt welding techniques to weld materials in different positions, for example, down-hand, horizontal-vertical, horizontal, vertical-up, vertical-down, overhead, inclined.
- Identify surface defects.
- Apply visual inspection, dimensional and alignment checks.
- Restore the work area on completion of the welding activity, for example, clean equipment and machinery, tidy the work area, return excess resources and consumables.
- Communicate verbally with others, for example, internal and external customers, colleagues, supervisors and managers.
- Follow procedures in line with environmental and sustainability regulations, standards and guidance. Segregate resources for re-use, recycling and disposal.
- Follow equity, diversity and inclusion procedures.
- Follow work instructions - verbal or written.
- Apply team working principles.
Your training plan
Welding.
The training will be carried out at Midkent College.
There is a minimum GCSE qualification of 4/C or equivalent in maths, English and Science.
Requirements
Essential qualifications
GCSE in:
English, Maths and Science (grade Minimum Grade of 4)Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.
Skills
- Communication skills
- IT skills
- Attention to detail
- Organisation skills
- Problem solving skills
- Presentation skills
- Number skills
- Analytical skills
- Logical
- Team working
- Initiative
- Patience
About this company
Buxton & McNulty Mechanical Services Ltd., became incorporated in April 2005 and was formed to provide Mechanical Services. We specialise in pipework installations covering public health, heating, chilled water, condensate. We offer onsite welding and have a prefabrication shop where pipe can be made to measure and delivered to site.
After this apprenticeship
The apprenticeship level 2 will run for 2 years. Once this has been completed, level 3 will be considered.
Ask a question
The contact for this apprenticeship is:
BUXTON AND MCNULTY MECHANICAL SERVICES LTD.
Emma McNulty
emma@buxtonmcnulty.co.uk
The reference code for this apprenticeship is VAC1000321700.
Apply now
Closes in 17 days (Saturday 7 June 2025 at 11:59pm)
When you apply, you’ll be asked to sign in with a GOV.UK One Login. You can create one at the same time as applying for this apprenticeship.