Apprentice Plumbing & Heating Engineer

Summary

Are you practical, curious about how systems work, and looking for a career in a high-demand industry?

Wage

£18,500 a year

Check minimum wage rates (opens in new tab)

Training course

Plumbing and domestic heating technician (level 3)

Hours

Monday to Friday 9.00am to 5.00pm, shifts may vary

37 hours 30 minutes a week

Start date

Monday 1 September 2025

Duration

3 years

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you’ll do at work

Based in Corsham, Wiltshire, we are looking for a full-time apprentice who will work on a variety of projects across a range of commercial buildings, you'll gain skills and qualifications to install, service, and maintain a wide range of plumbing and heating equipment, fittings and systems across a varied commercial estate whilst mastering tools and techniques across the industry,

As an Apprentice at Mitie, you'll be at the heart of what we do, making a real impact from day one. Here's a glimpse of what your journey could include:

Learning essential skills and knowledge including heating, plumbing, systems, and maintenance.
Assisting with planned routine maintenance as well as reactive repair tasks.
Collaborating with experienced professionals to gain hands-on experience.
Ensuring compliance with Health, Safety, Environmental, and Quality (HSEQ) standards, making safety and sustainability a priority in every task.

Where you’ll work

MOD Corsham
SN13 9ET

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

College or training organisation

WILTSHIRE COLLEGE AND UNIVERSITY CENTRE

Your training course

Plumbing and domestic heating technician (level 3)

Equal to A level

Course contents

Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
Plan tasks within plumbing and domestic heating systems industry.
Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
Decommission plumbing and domestic heating systems.
Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.
Carry out and apply the common installation processes and techniques used in the installation and maintenance of natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input) in the workplace.
Install, purge, test, commission and handover low pressure natural gas systems (up to 35mm R1¼) and natural gas fired hot water and central heating appliances (up to 70kW net heat input).
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
Decommission (including disconnection and dismantling) low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
Plan, size and select low pressure Natural Gas systems (up to 35mm R1¼) and Natural Gas fired hot water and central heating appliances (up to 70kW net heat input).
Carry out and apply the common processes and techniques used in the installation of air source heat pump (non-refrigerant circuits) systems.
Carry out and apply the common processes and techniques used in the installation of solar thermal systems.
Test, commission and handover air source heat pump (non-refrigerant circuits) systems.
Test, commission and handover solar thermal systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on air source heat pump (non-refrigerant circuits) systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on solar thermal systems.
Decommission (including disconnection and dismantling) air source heat pump (non-refrigerant circuits) systems.
Decommission (including disconnection and dismantling) solar thermal systems.
Plan, size and select air source heat pump (non-refrigerant circuits) systems.
Plan, size and select solar thermal systems.
Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing pipework.
Carry out and apply the common processes and techniques used in the installation of plumbing (above 28mm) and non-domestic plumbing systems and appliances (cold water systems, hot water systems, sanitary appliances and pipework systems and rainwater systems).
Test, commission and handover plumbing pipework (above 28mm) and non-domestic plumbing systems and appliances in the workplace. (cold water systems and sanitary appliances and pipework systems).
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on plumbing (above 28mm) and non-domestic plumbing systems and appliances.
Decommission (including disconnection and dismantling) plumbing (above 28mm) and non-domestic plumbing systems and appliances.
Operate in a safe working manner by adhering to health and safety legislation, approved codes of practice and guidance and applying safe working practices.
Carry out and apply the common processes and techniques used in the installation and test of plumbing and domestic heating systems (cold water, hot water, central heating and sanitary appliances and pipework).
Carry out and apply the common processes and techniques used in the installation and test of rainwater systems.
Plan tasks within plumbing and domestic heating systems industry.
Identify and document hazards for the plumbing and domestic heating systems work. Apply control measures.
Carry out commission and handover procedures and techniques on plumbing and domestic heating systems (cold water, hot water, central heating, sanitary appliances, and rainwater).
Install, test, and commission, electrical and electrical control systems applicable to plumbing and domestic heating systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on the non-electrical components of plumbing and domestic heating systems.
Perform routine service, maintenance, fault diagnosis and rectification procedures and techniques on electrical and electrical control systems applicable to plumbing and domestic heating systems including industry safe isolation procedures.
Decommission plumbing and domestic heating systems.
Decommission electrical and electrical control systems applicable to plumbing and domestic heating systems.
Plan, size and select cold and hot systems to meet customer’s needs in accordance with manufacturers guidance, regulatory requirements and industry recognised standards and procedures.
Plan, size and select domestic heating and rainwater systems to meet customers' needs in accordance with manufacturers' guidance, regulatory requirements and industry recognised standards and procedures.

Your training plan

As part of your Apprenticeship, you will be enrolled onto a Level 3 Heating and Plumbing qualification, which typically runs for 48 months.

You will be fully supported by our partnered college with 1-2-1 advice, e-learning materials, and a team of experts available for technical knowledge at your office.

Our dedicated Apprenticeship Team will support you every step of the way, helping you make the most of your opportunities and achieve both your current goals and those you have yet to discover. The benefits include paid on-the-job training, a structured 48-month programme combining practical experience with formal training, and a nationally recognised Level 3 qualification.

You will receive mentorship from skilled tradespeople in a professional commercial environment and have opportunities to work on a variety of projects, enhancing your skills and portfolio.

Requirements

Essential qualifications

GCSE in:

English (grade 4/C)
Maths (grade 4/C)

Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.

Skills

Communication skills
Attention to detail
Problem solving skills
Team working
Initiative

About this company

At Mitie, we’re the UK’s leading facilities management and professional services company. We deliver critical services that power businesses, communities, and individuals across the nation. Joining Mitie means being part of a team that values collaboration, innovation, and the passion to make a difference. We’re here to help you kick off your career with purpose, passion, and plenty of support.

Company benefits

Our benefits include a virtual GP, financial wellbeing assistance, and a flexible lifestyle platform, Choices. Enjoy high street discounts, a cycle-to-work scheme, life cover, enhanced pension contributions, and Mitie Stars with prizes up to £10,000!

Disability Confident

A fair proportion of interviews for this apprenticeship will be offered to applicants with a disability or long-term health condition. This includes non-visible disabilities and conditions.

You can choose to be considered for an interview under the Disability Confident scheme. You’ll need to meet the essential requirements to be considered for an interview.

After this apprenticeship

Upon successful completion, you'll have a clear career pathway into a full-time qualified role

Ask a question

The contact for this apprenticeship is:

WILTSHIRE COLLEGE AND UNIVERSITY CENTRE

earlycareers@mitie.com

The reference code for this apprenticeship is VAC1000318250.

Apply now

Closes in 17 days (Sunday 18 May 2025)

When you apply, you’ll be asked to sign in with a GOV.UK One Login. You can create one at the same time as applying for this apprenticeship.

After signing in, you’ll apply for this apprenticeship on the company's website.

Cookies on Find an apprenticeship

Contents